Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Here is a closeup of the fuel neck.

I know I know why not just tub it and bring it all down to the same level. :uhmk:

Well My thought is the tail gate is welded shut so custom recessed areas would be different. :c2: Maybe!!! :me:

Also I will use the fiberglass cover!!! Probably going to have it all lined with "White" spray in bed liner..

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

your build is bad a$$, you just opened my eyes to soo many possiblities for front end hell full roller swap, anyway i noticed you have a chrome trim round your BBW is that a factory piece or just and aftermarket kit. i've seen only one, but when i went to get a further look couldnt find the website.

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

That was an option that I was offered at Classic Chevy parts in OKC. It is just a chrome plastic covered rubber that spreads the gasket out. The glass guys scuffed it in a few places getting it in and I will rework it later. The glass was very tight because of the BBW kit I didnt want to take to much off and have leaks..

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

ok cook thks it will match my front stainless
Posted via Mobile Device

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Very cool build. I admire your determination. Cant wait to see it done!

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Thanks Average Joe... It has been a ton of fun so far..

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Drove the Caprickup to Sonic yesterday.. Runs and drives great... Just need to get the body work done... I also added the spare tire hole in the rasied bed and finished up the gas neck..

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

nice to see its on the road

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Still slow going, but have been driving around town. Took it over to a friends house a couple of weeks ago. About a 20 mile trip. Purred like a kitten. Stopped by sonic and got a drink. I HATE BODY WORK... I would rather be fabbing up something....

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

It is sure looking good, keep up the amazing work. You are getting there and it is great that you are able to drive it on the street. Thanks for the updated photos.

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Thanks C@rnut001, I need a week off work to focus on Eli, but that just isnt going to happen....

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Glad to hear it's running good! Hang in there. You're doing a nice job.

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Spare? you would be the hit of the campsite with some ice and a bunch of tall necks in that well!

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

NewFisher, I like the way you think... I am adding a sunken ice chest into the bed too..

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Great work! It sure has come along way!

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Are you going to make it out to Mufflers on Main in Blanchard on Sat.?

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

This thing is really looking good, keep up the good work.

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Looking Good!

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Well, so far I plan on making it. There is still a small event called OU football, that I have to get out of working. I think I have everything covered but will not know until late Thursday.

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

"Thing" its a Caprickup.. :lol:

Thanks, I just need a few more open days..

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Thanks Aggie91.. just need a little more time...

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Thanks Dieselwrencher!!! I am ready to start driving to car shows. Looking for a 13-15 foot 60's style camper to start working on.. Want to pull it around the State..

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Just looked through your build. All I can say is WOW!. You've done an excellent job and defiantly thinking outside the box. Keep up the great work. Those LT1's run great. I love my fuel injection. So worth the work.

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

any pics of steering shaft

Re: 1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)
 

Any updates?