Re: 72 K30 Build
3 Attachment(s)
Thanks Scott!
Knuckles and axles! |
Re: 72 K30 Build
Looks great Brett! Getting really close to rolling - maybe not steering though:lol:
|
Re: 72 K30 Build
1 Attachment(s)
Hey Brett, are you using some form of tread locker on those U-bolts?? I was visiting the friend I sold my K30 swap to last week and ALL of the rear U-bolts were loose! I couldn't believe it, they were TIGHT when I put it together!:uhmk:
|
Re: 72 K30 Build
5 Attachment(s)
Quote:
Quote:
Spindles, brake mounts, backing plates and prep hubs with inner bearing, seal & rotors. |
Re: 72 K30 Build
Quote:
That axle is looking sweet! If I keep reading this thread, I'm going to have to start working on my K10 project that's been back burnered :lol: |
Re: 72 K30 Build
5 Attachment(s)
Thanks for the compliment Jim. I'd think some thread locker should do the trick would love to see the upgrades and new door logo's.
The hubs are installed and they work as expected, man this axle is wide and heavy! :sumo: |
Re: 72 K30 Build
4 Attachment(s)
So it steers now and is all greased up and ready to go, (?) I mean roll! :lol:
|
Re: 72 K30 Build
That is nice ,moving right along .
|
Re: 72 K30 Build
I've found they don't roll very well without the wheels and tires ... dust shields get in the way
:lol: Nice work! |
Re: 72 K30 Build
Nice looking chassis!
|
Re: 72 K30 Build
Quote:
Quote:
Quote:
Not much to show lately, keep getting sidetracked, the weather has been great and I got my honey dues you know. One of the projects a DIY patio we poured a year and half ago has turned out to be a fail. Concrete is really brittle and flaking bad even after the sealer topcoats we had put down so I’m hoping practice makes perfect? :waah: |
Re: 72 K30 Build
looks awesome. i'm still stoked its a dually.
|
Re: 72 K30 Build
Quote:
|
Re: 72 K30 Build
2 Attachment(s)
Quote:
Quote:
Here are a couple of pics from last week’s project, the dogs are not happy but my old blue C30 is always ready for the next job! Back to the build, I’ve been stewing on what tire to run for the last month or so. Finally found a killer price so I ordered a set of these Discoverer A/T3’s last Monday. http://us.coopertire.com/Tires/Light...ERER-A-T3.aspx OK since you twisted my arm, I’ll share the killer price info http://www.ebay.com/itm/310901803021 with the $100 discount ordering 6 it came down to $121 a tire. Cooper is running a spring promo on this same tire until 4/15 that’s another $70 Visa rebate. If it works out as planned that’s just under $110 per tire! Price gets even better if you were buying 4 instead of 6. |
Re: 72 K30 Build
Hey Brett chassis is looking good... Too bad about the concrete work. Removing it is a lot of work. Time away from the truck. lol! Those tires will look good on there. If I didn't have a car to build after I get these trucks done I would do a 4x4 with 3/4 or 1 ton running gear. it looks beefy!!! Keep up the almost daily updates it keeps me motivated!
|
Re: 72 K30 Build
I hired the neighbor kid to break most of it up and help me get it into the bed of my truck. Saved my back for sure!
|
Re: 72 K30 Build
2 Attachment(s)
Quote:
Quote:
Here are the new meats and now our garage smells like a tire store! I’ve got another set to clean up for blue which is still sporting the original split rims with tubes. |
Re: 72 K30 Build
4 Attachment(s)
It’s time, finally pulled the bag off our new motor last week. Installed a missing rear cam plug and got it on the engine stand. Need to swap and steal a few parts off the 402 so bolted it on the old stand temporarily for safety.
We had an old car show buddy of mine get crushed last year under his blown 69 Camaro, they found him several days later. I think about him when I'm getting under something heavy these days a big block in the head or lap might hurt just a bit. |
Re: 72 K30 Build
You painting it Chevy orange???
|
Re: 72 K30 Build
2 Attachment(s)
Quote:
I’ve got another pan that’s kind of beat up I’ll put on the parts motor. This one looks to clean up much better I think. So internally balanced flex plate, factory pan with dipstick, spin on filter adaptor, intake and old oil pump so we can make sure to get the right pickup. Should be everything we are going to need for now. |
Re: 72 K30 Build
Man, that's a shame to hear about your friend. Not good at all. You're making great progress!
|
Re: 72 K30 Build
Pluggin away!
|
Re: 72 K30 Build
4 Attachment(s)
Quote:
Quote:
Exchanged the old calipers for some rebuilt ones and finished up the front brake lines. Put the front sway bar in and torqued everything to spec. We are ready for some rubber up front. |
Re: 72 K30 Build
4 Attachment(s)
It is off the jack stands in front.
|
Re: 72 K30 Build
Looking good ,almost a roller .
|
Re: 72 K30 Build
Very nice. I like the contrast between the frame and axle. Shoot, the way you're making progress, you may drive yours before I drive mine again. :lol:
|
Re: 72 K30 Build
Looking good. Brett. As usual.
|
Re: 72 K30 Build
5 Attachment(s)
Quote:
Quote:
Quote:
And now the back is off the stands also. It’s not as complete as the frontend we still have a few things to address (finalize parking brake, diff fluid etc.). We’re still planning on dropping the diff down to clear the spring packs to bleed the brake system, so the final spring, shock, u bolt torque will wait also. But hey tada, it does roll! |
Re: 72 K30 Build
Woohoo! That chassis is a rolling work of art! Nice job Brett.
|
Re: 72 K30 Build
That does look nice ,great job .
|
Re: 72 K30 Build
Very nice!
|
Re: 72 K30 Build
Sweet!, if i missed it what brand shocks?
|
Re: 72 K30 Build
That is a sight to behold! Looking great, Brett!:metal:
|
Re: 72 K30 Build
That thing looks great Brett. I like the dually look.
|
Re: 72 K30 Build
Thanks every one of you for the kind words, it put a smile on my face! :D
Mike they are Monroe’s, that bright yellow is just 70’s -80’s “Bam” it does pull the eye to the shocks! :lol: |
Re: 72 K30 Build
4 Attachment(s)
Scored this crusty factory big block 8” balancer timing cover from a friend? He only charged me $12 and told the seal was no charge! :lol: Took the wire wheel to it and found somebody had engraved their name inside where the cam button will ride.
|
Re: 72 K30 Build
that thing looks super!
|
Re: 72 K30 Build
3 Attachment(s)
Thanks Ryan!
Parts are coming together here’s that 402 pan again with a layer of crude removed she is a beauty! |
Re: 72 K30 Build
Custom! Paint the dents black and the rest orange... J/K..
|
Re: 72 K30 Build
3 Attachment(s)
Hey now that's a thought Mike, uh no! :lol: But thanks for the suggestion. :lol:
This setup has got to save us some gas don’t you think? :devil: Mating an 850 double pumper to the old spread bore performer using a couple of square base gaskets and a 1/8” square plate in between is not quite enough to clear the primaries so a little shave on the center divider will get us the rest of the way. Our factory type breather setup to the air cleaner base we are going to run can’t accommodate a large adaptor/spacer because of the angle it will create, also I believe the divided plenum helps with low end torque. So I’m trying to keep as much of the intake divider in place as possible. Soaking some areas with gunk before a trip to the solvo sink hoping it cleans up good enough and that it doesn’t have to be painted. |
All times are GMT -4. The time now is 03:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com