Re: Danny Boy is BAACK! w/ '55 Big Window
looks good
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Looks great.
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Thanks you guys, but at best it looks ok. But I appreciate the kind words.
When I do the driver's door I will be even MORE careful with alignment than I already was. |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Bam,
What about WHEN to grind? Seems like its easy to make the metal paper thin (Post #560 above)! In hindsight, I tacked a moment too long. The lack of gas was effecting the weld, but I didn't know it. I was going through the flap disk too fast, so I switched to the thick grinding wheel. Worked better, but caused bluing - so I stopped immediately. Guess I gotta grind as slow as I tack, huh? |
Re: Danny Boy is BAACK! w/ '55 Big Window
The patch came out real nice.
Kim |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
Its all about how far you are willing to go. Some people like myself try to use very little to no filler, I try to get the metal that I have access to the back to only need primer as a filler. When I don't have access to the back I even more delicate when I weld in a panel because I know I will have to live with the shrinkage and use filler, so I try to minimize that shrinkage as much as possible. I don't know what equipment you have but this is how I grind welds. I use a cut-off wheel on my 3 inch air grinder to know the bead down and then I use my roloc disc on a air grinder to clean it up and blend the patch in. |
Re: Danny Boy is BAACK! w/ '55 Big Window
Thanks Bam, this is EXACTLY the advice I was looking for all in one place instead of reading bits & pieces in various threads and trying to surmise what's the best (for me) to do.
EQUIPMENT I have a couple 4" angle grinders - a good Milwaukee one, and a cheapo HF one that has lasted so far. I have cut off disks and thicker grinding type disks. I'm thinking of getting a couple more angle grinders to keep a flap disk and a wire wheel on so I don't have to be changing. I do have a cheapo air angle grinder with HF Rolocs - but since buying I've read those don't last. Have a recommendation for a good brand Roloc disk? I also have a 60 gallon vertical compressor but I haven't run 220v to my garage yet - that is coming later this month/June. In the meantime I have a little Senco compressor I use for tires and nailers, but it can't keep up with the angle grinder. Thanks again for all your advice so far. Best, Dan Quote:
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Dan I buy the roloc sanding disc in bulk on ebay. I buy 60 or 80 grit. Now remember I said I knock the bead down with a 3 inch cut off wheel on an air grinder. Please don't try that with your electric grind it could be bad for your health. Do the best you can until you get that compressor hooked up. I have used flap disc on electric grinder but you must be careful as you know it can remove a lot of metal. I've also used a flap disc on a variable speed polisher I liked it because I could slow the speed down.lol
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
Unless you're talking about cutting myself? I ALREADY learned that painful lesson right after I got my truck and cut out an 1/8" thick plate the PO had welded into the bed. Cut the CRAP outta my index finger. Took a long time to heal that one. |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
A long time ago I was cutting and got wanted to help it along and the dang thing exploded in my hand. Well 15 stitches later I learned my lesson. I was just thankful it was my hand and not my eyes. |
Re: Danny Boy is BAACK! w/ '55 Big Window
I also use the cutoff wheels on the die grinder in tight spots where the wheel might get stuck and break or kick back. The die grinder will just stop where the electric grinder won't.
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Ok, I see what you guys are talking about. There's a sort of default fail safe with the air die grinder because it will bog down. Having not really used mine yet, I didn't think of that.
On the electric grinder, it seems that the thicker grinding disc would be "safer" in that it won't slice quite as quickly if it inadvertently goes against your glove (or elsewhere/leg) than the thinner, sharper cutting disc. But I'm probably quibbling over milliseconds anyway. |
Re: Danny Boy is BAACK! w/ '55 Big Window
your build thread has been a bit idle so I thought I'd check in and see how things are going Dan
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Thanks for noticing.
You're right. I was on a roll and then I got sidetracked prepping for a camping. But I'm back now (again). Still a few post vacation things to do - clean/wash the camper and truck, make some repairs, etc but I should be back on the truck's door panel repairs soon so I can FINALLY!!!! paint the door interiors then get the new door weatherstripping on and stop the terrible rattling. I rarely drive the '55 for that reason & the lack of a dual master cylinder that has me being a "Nervous Nellie" - the stock single MC only worked fine for 60 years, lol. |
Re: Danny Boy is BAACK! w/ '55 Big Window
Dan, are you going to drive it to the Brothers Truck Show?
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Meh....I don't know. She's pretty rough. Doesn't really belong out there with all those Maxim models, ha ha.
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
Its a classic chevy truck so it belongs. |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
DRIVE IT MAN!!! :metal: Posted via Mobile Device |
Re: Danny Boy is BAACK! w/ '55 Big Window
Thanks JR, Bam,
I'm not ashamed or embarrassed of my truck. I own an old truck because I love old trucks in all the ways they come from show stopper to grungy. I get a grin driving her around. It's just that it's not "under construction" or "a build" per se. It's a refurbishment (I guess) so the frame is still 60 year old dirty - it will NOT stay that way, but you know what I mean? If it were a "build" it'd show a clean, smooth gloss or semi black frame through the unfinished bed floor, etc. I'll be at the show and I'll WANT to drive her - though it would be the longest drive she's made so far. About 80 miles round trip from Pasadena to "Anaheim" - nearly Corona out there. Should we wear a label with our board names on it? I don't any of you guys by sight. |
Re: Danny Boy is BAACK! w/ '55 Big Window
I think it would be great if you drove it out there. I would like to see it also.
Kim |
Re: Danny Boy is BAACK! w/ '55 Big Window
Dan when I said under construction I was not talking about your truck.lol I mean really under construction. I seen guys trailer their projects to show. No engine or trans some sometimes only in bare metal displaying the work or the work that needs to be done.
Man you are light years ahead of a lot of us you can drive your truck. Enjoy it and drive it. Its nice to see that JR25 and Kim agree. Drive the wheels off that thing.lol |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
Ok, I won't promise but I'll try. Now I've gotta go home and do a few things I've been procrastinating on...you slave drivers! |
Re: Danny Boy is BAACK! w/ '55 Big Window
atta boy!!! Don't ever feel that your truck isn't good enough for a show Dan. You've done a lot of work on it, you drive it daily and should be proud to show it off. REAL cars guys will appreciate your efforts and will pick up on the pride you share in it.
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
Quote:
Posted via Mobile Device |
Re: Danny Boy is BAACK! w/ '55 Big Window
Ok, so here are the few things I'd liek to get done on the truck before the show:
Finish the interior speaker hole repairs, sand/prime/paint door interiors, install door weatherstripping, install 3 pt. seat belts, R&R seat for temporary recover, install Lokar floor shifter and new tranny cover. Not that anyone will notice the difference but it sets goals for me. |
Re: Danny Boy is BAACK! w/ '55 Big Window
A'ta boy Dan, you've got goals ! Now getter done. :)
I know you can do it just don't get side tracked with some more bling. :) |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
If I was on the west coast, I would bring a cooler over and ride with you! Sounds like you are comitted now!!! ;) |
Re: Danny Boy is BAACK! w/ '55 Big Window
dan DRIVE IT - ENJOY IT AND IF PPL DONT LIKE IT - THEY DONT HAVE TO LOOK !!!!!
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Oh I do, and I agree.
It's just that shows are full of guys that know exactly what these truck CAN be made to look like. I'm sure I'll enjoy the show. I'll be walking around so if someone says something I wouldn't like about my truck I won't hear it anyway! lol |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Dan go have a good time at our age who cares what anyone thinks. I say if you can drive it thats what counts! I see kids with rusty rat rods true Americana and I think thats cool they are enjoying a hobby, and they ain't blowing people up at marathons.
|
Re: Danny Boy is BAACK! w/ '55 Big Window
not too thread steal, but when is the Brothers show?
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Sunday, July 8th.
Google, you oughta try it! lol. |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Just being an A-hole and busting your balls, sorry.
Guess I default to my "strengths" huh? ha ha. Do you think you will be there? |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
http://www.brotherstrucks.com/images..._web_flyer.jpg |
Re: Danny Boy is BAACK! w/ '55 Big Window
Dan, drive it man. You might be surprised at how many people walk past the show trucks to look at yours. There are a lot more people who can identify with a daily driver than a $100K show truck.
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Hell, I'm thinking of loading my truck on the trailer and taking it to a show in 2 weeks, and its not even running yet. It's all about getting there and talking with other car guys and ladies.
Posted via Mobile Device |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
|
All times are GMT -4. The time now is 09:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com