Re: My new build thread: Stage 4!
Got outer lower door and inner bottom door skins for both sides today from WES. Decided I want to keep these original doors and just rebuild them. Makes quite a list of new metal to be welded in soon. Working on a list of all parts, and will snap some pic's soon!
|
Re: My new build thread: Stage 4!
Weather is warm here so started ripping into the K5 again last night. Started to remove the rear top hatch, what a piss poor setup GM had in mind in 68-69. Design a fiberglass top for a convertible truck with bolts w/welded nuts inside the top. Like they are not go to corrode and never come out. Talking about my 1970 double wall top that I thought was in not so bad condition. Started to pull the rear top holddown strikers w/ the bumpstops off, and broke 1 bolt off in the top, and broke the passenger side striker. Worked on the driver side and top bolt came out of the striker,but bottom welded nut broke loose.Got out the sawzall and went through the hole provided and cut off the welded nut on the inside of the top.Moving on into tuesday night now, Checked rest of bolts and screws into hatch, all corroded, would not budge. Have a decent replacement hatch that needs rework, so took out the 1" hole saw and bored holes in the top rear next to the bolts and screws so I could get in there with the sawazall and cut off the welded nuts to get the bolts and screws out. I think I can rework the bolt and screw holes in the top to bolt,screw, up another hatch, and patch up this area, so I can get into it in the future.Will post up some pic's asap.Can you say neversieze!
|
Re: My new build thread: Stage 4!
Ok, again no new pics yet. Working 7 days a week again. Have been cleaning, painting and organizing all the rear hatch resto parts and almost am ready for the pic's! These tops/hatches are a real pain to restore! I will have quite a few extra hatch parts for sale when I finish this setup!
|
Re: My new build thread: Stage 4!
Oh yeah! Been slacking on the posts lately, because I have been so busy at work. Almost ready to fire the K5 up and get started on the shackle flip, front winch bumper redo, and the rear bumper fab. Collected a lot of needed stuff over the winter and am ready to go! Gonna work on the new pole barn, and get ready to rip & tear! Also cleaned and painted almost all my restoration stuff for my rear hatch, will try and take some pic's soon!
|
Re: My new build thread: Stage 4!
Ok, talked to my friend John last night and looks like I'm almost ready to take the K5 to the shop. He has to wrap up a customers project truck called the "twinkie", but after that, might be my turn. I think it is time to really get ripping on the upgrades for stage 4!
|
Re: My new build thread: Stage 4!
Checked in with John again tonight, and welding up the swaybar mounts & the bumpstops with the welded tabs for the limiting straps, comma, comma, comma! THE BIG TWINWINKIE truck will be done soon! I am ready to get started on stage 4 of this project, and think I have a few funds banked to get things ripping soon! I will get some pic's of Twinkie for ya"ll before it leaves the shop! It has 5 ton rockwell axles and huge tractor tires, custom link suspention, frt,and rear! CHAOS OFF ROAD!
|
Re: My new build thread: Stage 4!
5 Attachment(s)
Attachment 904231
Attachment 904235 Attachment 904236 Attachment 904237 Attachment 904238Got after it a little this weekend. Dug out the Kennesaw Mtn Frt bumper and took the sawzall to the outer tubes and cut them off! Gotta do some grinding and clean it up, and have the new tubes welded on the way I want them. Also got out some parts to send off to the sandblaster this week. Get them cleaned up, have all the extra holes welded up, and primered and ready for install. Here's some more pic's! |
Re: My new build thread: Stage 4!
5 Attachment(s)
|
Re: My new build thread: Stage 4!
5 Attachment(s)
|
Re: My new build thread: Stage 4!
2 Attachment(s)
Here's two more pic's! Will take more when stuff comes back from blaster!Attachment 904260
Attachment 904261 |
Re: My new build thread: Stage 4!
5 Attachment(s)
Oh man, Happy Easter to everybody! I got bored today and went for a walk back to an old abandond dump site out in the country. I have found a few interesting items there before, but look what I found. Can't belive I never saw it before!Attachment 904790
Attachment 904795 Attachment 904796 Attachment 904797 Attachment 904798 |
Re: My new build thread: Stage 4!
3 Attachment(s)
Amazing, one man's garbage, another man's treasure! Couple more pic's!Attachment 904800
Attachment 904801 Attachment 904804 |
Re: My new build thread: Stage 4!
cool, looks like the frame and brackets are in good shape! Might need a LITTLE foam work :haha:
|
Re: My new build thread: Stage 4!
Yes, pretty solid except for the top tubes under the armrests, holes rusted thru. Cleaned it all up of old foam and fabric, threw most of it in the bonfire but saved a few pieces with the scrooling because it is so cool it still survives! Still can't belive someone thru this away, and I will be parting this out if anyone is looking.
|
Re: My new build thread: Stage 4!
5 Attachment(s)
Allright! John is finishing up one of his latest customer projects and making room in the shop. Hope to get mine fired back up soon and put in there and start on the frt and rear bumpers. Remake of the Kennewsaw mtn bumper I bought way back, and a custom rear from Chaos Off Road! Here's some pic's of the Twinkie out on the trailer for the next step!Attachment 906807
Attachment 906808 Attachment 906814 Attachment 906816 Attachment 906817 |
Re: My new build thread: Stage 4!
3 Attachment(s)
Yea! Will not hesitate any longer to get the K5 up to Chaos Off Road! Heres a couple more of the Twinkie!Attachment 906826
Attachment 906827 Attachment 906830 |
Re: My new build thread: Stage 4!
Might I mention, Chaos Off Road is not a body shop/per sa, more of a custom off road suspenion-build what you want shop. The Twinkie pictured was only in the shop for the custom 4x4 upgrade, the rest on that project I understand is up to the customer-just my take on it. But what I have seen John build lately looks damn good and seems to be holding up really well under the stress it is put under! Glad he is only like three doors up from me! Can't wait to get started on the K5 SOON!
|
Re: My new build thread: Stage 4!
Plan on reworking the Kennesaw mtn wincher bumper tomorrow. Need to grind off the original welds, and prep for welding on the new tubes. Also, drill two holes for the KC off road lights I want to mount. Will post up pic's as progress happens!
|
Re: My new build thread: Stage 4!
No progress today, had to work again. Will do some grinding tommorrow if its not raining!
|
Re: My new build thread: Stage 4!
5 Attachment(s)
Wow! Finally I can say I got "some" progress done today. Got the Kennesaw mtn wincher bumper back out and did some grinding on the welds where I had cut off the outer tubes. Got most of the rough grinding done, just need to finish it up and make it look right again. I will finish sanding it, get it ready to have the new outer tubes welded on the way I want them. Here's some pic's, before, during, and kinda how it will look when it's done! It hopefully will look sorta like what it was supposed to look like when I ordered it. Ok, here goes!Attachment 910804
Attachment 910812 Attachment 910813 Attachment 910814 Attachment 910818 |
Re: My new build thread: Stage 4!
2 Attachment(s)
Here's the way I wanted it to look when I ordered it, and also a pic of the rear seat I scrounged out of the dump, after I stripped it of old foam and etc!Attachment 910819
Attachment 910820 |
Re: My new build thread: Stage 4!
That will look much better!
|
Re: My new build thread: Stage 4!
Thank's VA! Seems your the only one following my thread, but as slow as I have been moving, I am not surprised. Felt good to get the rough grinding done today. This was an expensive bumper that I bought a few years ago, and it just was not made right. I am confident that I can modify it into one I can use and like. I heard all the feedback on KENNESAW MOUNTAIN products before I bought it, but I went and bought it anyway. Actually, the way Kyle welded the center stinger hoop on, even though it was not how I ordered it,may just work out better as I can mount my KC offroad lights next to the frt. hoop below the outer tubes. Next step is final sanding, and get it up to Chaos Off Road to get it test fitted to the front end, and then weld on the new outer tubes. It may need some extra boxing in to strenghten it for winching. Not a problem, I am on a roll!
|
Re: My new build thread: Stage 4!
Spent a couple hours final sanding the weld spots tonight. Not quite there yet, but real close. Got one spot where I got careless with the sawzall and cut into the center tube a bit. No problem, a little weld and some more grinding and it will be ready for welding on the new outer tubes. I'll mock up the tubes, and then drill the 2 holes for the KC offroad lights!
|
Re: My new build thread: Stage 4!
5 Attachment(s)
Off topic, no progress on the K5 lately, because it's NOW TROUT SEASON! Kinda busy this weekend with the wife and brother in-law bringing home the next slabs to go on the grille! Pic's!Attachment 916022
Attachment 916024 Attachment 916027 Attachment 916028 Attachment 916029 |
Re: My new build thread: Stage 4!
5 Attachment(s)
Well, glad to say I got a little done today. Started cleaning out the barn and organizing some of the rebuild parts. Almost looks like a repro parts catalog for a first gen K5! Heres some pic's!Attachment 919301
Attachment 919302 Attachment 919303 Attachment 919304 Attachment 919305 |
Re: My new build thread: Stage 4!
5 Attachment(s)
|
Re: My new build thread: Stage 4!
4 Attachment(s)
|
Re: My new build thread: Stage 4!
Got a second wind this afternoon, and created some wall art! Hung the fenders, and etc., just trying to make some room here. Have a bunch of stuff ready to go, wife jumped in today and said-ready to get going on this! Will try and get some pic's tommorrow of the art!
|
Re: My new build thread: Stage 4!
Went out and dumped some gas in the carb today, and the K5 fired right up! Sounds real good, been a few months, last fall. A fuel leak on top of the carb, but it will start when you pour a little fuel in and get it running! Going up to Chaos Off Road in a minute, heard some grinding up there, gotta check it out! Feels good to start the old girl up again!
|
Re: My new build thread: Stage 4!
Oh yeah! Went and looked at a motor a friend of mine is selling. 383 stroker he just pulled out of his corvette, selling the vette, so wants the numbers matching engine back in it. Motor has some issues, but I will completely go through it if I do end up getting it from him. Gonna get my partner from work to come look at it monday, and get his advice. My opinion, is I will pick it up and build it into a awesome small block for stage 4!
|
Re: My new build thread: Stage 4!
I'd see what your friend says but if it has issues plan on a full rebuild. If there aren't high dollar heads id just rebuild your own. Once you start the resto you won't be driving it anyways so you could do it then.
Posted via Mobile Device |
Re: My new build thread: Stage 4!
Thank's VA! Planning on a complete rebuild from bottom to top if I do get it. I t does have some vortec heads on it, but I will know more when my partner from work takes a look at it. Wife said maybe-if I start working some more overtime! I can do that! I do plan on taking my time rebuilding it as I work on the rest of this project.
|
Re: My new build thread: Stage 4!
Oh yeah! Spent a couple hours cleaning up the high hump trans cover I picked up from Sharpie a while back, needed this one to swap in the NP205 t-case. Dropped it off at Chaos Off Road to have some unneeded holes welded up, and restored. John came down again and looked over the K5. As soon as a customers jeep V8 conversion is out of the shop, my K5 is next in line! Gonna set up the custom bumpers first, and then move on to the floor pans, rockers, etc. Lot's to do, but ready to go! Can't wait, John's talking me into twin sticking the NP205 t-case, but not sure if I want to go there!
|
Re: My new build thread: Stage 4!
Went up to Chaos Off Road again tonight. Got the t-case together for the customers jeep in the shop. One step closer to getting the K5 in there! Making sure I have everything set for the poly body bushing set to go in first!
|
Re: My new build thread: Stage 4!
Yes! My partner from work looked at the 383 stroker my friend has for sale today. I will buy it tommorrow. It is what I want for this type of build! It is set up right on the lower end, just need to go through the top end, cam etc,.Telling the wife, it won't cost too much! She is good to go on it, yeah, but how much does that cost?
|
Re: My new build thread: Stage 4!
Yep, it is setting on a stand in my pole barn. Awesome! Also got the high hump back from chaos off road today, looks great! Also had the retaining rings for the-tcase and the 4 speed blasted, look great!
|
Re: My new build thread: Stage 4!
Primered the trans high hump, ready for black paint. Mocking up the new/used shifter boots! Need to straighten the NP205 shifter retainer ring I just had blasted! Only reason I had to change hump was because I am swapping from a dana20 t-case to a np205 t-case, they have different holes. Will post up some pic's when I get time.
|
Re: My new build thread: Stage 4!
Oh man! Big mud bogg tommorrow! Taking the Chaos off road bus, and the jeep. Pic's tommorrow night! Been working on the K5 high hump, and shifter retaining rings, almost ready to go! Happy Memorial Weekend everybody!
|
Re: My new build thread: Stage 4!
5 Attachment(s)
Attachment 932311
Attachment 932312 Attachment 932318 Attachment 932319 Attachment 932320Yep, bogging today! Fun , fun, fun! Pic's! |
All times are GMT -4. The time now is 09:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com