Re: What did you do to your truck today.The 3rd chapter
 

Looks very good!

Re: What did you do to your truck today.The 3rd chapter
 

Pulled out the old crappy carpet and laid down some POR15, sound deadener, and new carpet. Now my seat looks like crap so that will be my next project.

Re: What did you do to your truck today.The 3rd chapter
 

Sent her on her way to her new owner.

Re: What did you do to your truck today.The 3rd chapter
 

carpet looks great

Re: What did you do to your truck today.The 3rd chapter
 

Made the dolly for my bed. And painted the passenger side of the frame. Doing this one outside so I have to wait on the weather. Talked to two dustless blasters the cheapest was 600 $ to blast the inside of the bed and back half of the frame. Not happening , sanded acid etch then epoxy prime . PPG urethane black top coat ,it works for a driver. Do the rest on the next nice day. Going to do the trailing arm and link bushings when they come in so I'll do the rear and arms then off the truck.

Re: What did you do to your truck today.The 3rd chapter
 

Installed new Tough Stuff PS pump and finally figured out the correct routing of the PS lines only to find that the CPP pulley was junk and Wobbles

Re: What did you do to your truck today.The 3rd chapter
 

The beast is alive! Built 6.0 LS. Still needs exhaust. Running open headers in this video.

Re: What did you do to your truck today.The 3rd chapter
 

that came out real nice.... nice work ...that dustless blast guy must have more work than he can handle :( or something ....he chased you away with that price I been thinking about buying me one of them units for a retirement job ...my wife is figting me about it says Im crazy I figure I can take the jobs I want and will pay for it self in no time 12k gets you in...no overhead back it in the garage for storage no employees no wotrkers comp and lots of cash deals of corse I would repot all of the earnings to my Uncle .....

Re: What did you do to your truck today.The 3rd chapter
 

Thanks for the compliment.

And yes the price was out of hand . I did the dolly in the morning cause it was cloudy and cool . Warmed up nicely so I started the frame took me about 4 hours with a rotary sander and wire brushes on the angle grinder. He would have had everything done in that 4 hours. His real costs are a few pounds of glass and some gas for the compressor. I had to supply the water too.

Re: What did you do to your truck today.The 3rd chapter
 

Removed a previous owners' "ford solenoid mod" and a bunch of non-functioning or redundant electrical garbage, while overhauling the whole system. Not the most fun way to spend your weekend.

Re: What did you do to your truck today.The 3rd chapter
 

I went out to the shop to move the truck out so to move another one in and found this. It's an old tire but was still holding air so I've waited to replace it. It was good enough for a roller.
Guess I'll be ordering another tire now. :lol:

Re: What did you do to your truck today.The 3rd chapter
 

I have a few of those,have a pile of aired up rollors to put on a frame to move around,one day was in the shop and Kaboom, scared the crap oit of me,thought the neighbour finally blew himself up smoking with oxygen tank hooked up,went outside and found the tire.

Re: What did you do to your truck today.The 3rd chapter
 

Painted the new front bumper and grill guard for the 565 truck. Can't wait to put it on.

Re: What did you do to your truck today.The 3rd chapter
 

Used it.

Re: What did you do to your truck today.The 3rd chapter
 

Me too. Wood for the 68 long step bed

Re: What did you do to your truck today.The 3rd chapter
 

:metal: heck yes! That will look amazing.

Re: What did you do to your truck today.The 3rd chapter
 

Got the patch panel ready for the bed real easy when a friend has a new computerized brake.

Re: What did you do to your truck today.The 3rd chapter
 

Using white oak.

Re: What did you do to your truck today.The 3rd chapter
 

One of my younger brothers put white oak in the bed of his truck, with stainless steel strips. Everyone joked that the only thing he was going to haul after that was ass. I guess so, what with the 383 stroker and the blower and narrowed Ford 9". I dimly recall that it made it into a magazine. I'll ask one of my nephews if that is true.

Re: What did you do to your truck today.The 3rd chapter
 

Using white oak rather than red because it's much more rot resistant when exposed to weather. Not going to be a show bed.

Re: What did you do to your truck today.The 3rd chapter
 

Major job getting the trailing arm off. Ubolts were frozen in the arm. Had to use heat and a bfh. New bushings and paint. It's back on the truck just to bushed to get another picture

Re: What did you do to your truck today.The 3rd chapter
 

My truck has had an incessant whine in the rear end since I bought it. Had it checked and everything is tight and good. Been told some are like that but it annoys the hell out of me. So today I bit the bullet and ordered new rear axles, crown and pinion, bearings, seal set et al and a Detrot Locker TruTrac as the truck has 3:73's and i"m instaling a 700R4 and am getting an original 400 small block which will be replacing , in a few years, the original 90,000 mile 350. I figure with the 700R4 's lower first gear and the 3:73's and a 400+HP small block the TruTrac is a good option.Oh yea the TruTrac cost almost the same as all the other parts combined..

Re: What did you do to your truck today.The 3rd chapter
 

Still a few components I can add yet, but for the most part "phase 1 of 3" is done.

Failed on the first valve cover gaskets, they were too thin, and I perhaps I blew it expecting the body/paint guy to flatten out the valve covers. Where there's a will there's a way, I ended up flattening the surfaces yesterday. Pillows, hammers and straight edges got her done cleanly. I ordered Moroso gaskets, which are basically 4-5 X the cost. I don't mind spending $45 if it means no leaks. Hopefully they do the trick.

It's all on phase 2 now, which is body and paint, and I'm not doing much of either.

Re: What did you do to your truck today.The 3rd chapter
 

Tony, coming along nicely!

Ray

Re: What did you do to your truck today.The 3rd chapter
 

Installed the new valve covers & air cleaner I picked up at the Long Beach Collector Car Swap Meet last weekend. Also new plug wires. I think she cleaned up pretty good. Still a few more things to do until I'm happy with my recent purchase. I found the correct alternator mount at CPP so I need to get that installed. I also need to sort out the radiator mounting. I seem to have a 3 row radiator installed in the larger 4 row mounts.

Re: What did you do to your truck today.The 3rd chapter
 

Looking good.

Re: What did you do to your truck today.The 3rd chapter
 

Finally got my new radiator and got it fitted right away. The original brackets didn’t quite fit but longer bolts and some spacers got them to fit good.

Re: What did you do to your truck today.The 3rd chapter
 

That looks fantastic!

Re: What did you do to your truck today.The 3rd chapter
 

Painted the top of my dash today. Used truck bed liner. Not that I wanted to use it but my black paint when to cap on me so I decided well I got it all masked up I mine as well use the can of bed liner I had laying around. Turned out pritty good. Will see how easy it is to clean in the future. New dash pad on the way.

Re: What did you do to your truck today.The 3rd chapter
 

Got it running!

https://youtu.be/NVcrKw8zutI

Re: What did you do to your truck today.The 3rd chapter
 

Drove it. There was a Buick-Olds-Pontiac meet-and-greet that I started many years ago when I had a hot rod Buick Skylark. I sold my Buick many years ago (the truck is money pit enough!) so another guy started doing it. I went today and got to see some pretty nice old cars. My favorite was a black/black/black '65 GTO with 3 deuces and a 4 speed, and a 389, completely original down to the brake drums, presented by the original owner. I had a '65 GTO, but it was a complete beater.

Re: What did you do to your truck today.The 3rd chapter
 

Put a new rear u joint in the driveshaft since the old one fell apart leaving me on the side of the road the other day. I decided not to do the front one at the same time, since I have a knack for messing up things that I touch, and it felt fine.

Re: What did you do to your truck today.The 3rd chapter
 

I'm going through withdrawals, a depression and self-doubt;) because abruptly, there's very little I can do for my truck right now.

I did manage to polish up these Wittek clamps today. They were on the spark arrester/carb. spacer, and withstood the test of time nicely. The power steering reservoir hose has the same clamps.

Re: What did you do to your truck today.The 3rd chapter
 

Finished painting the front third of my frame, now I can assemble the front suspension with the disc brake conversion.

Re: What did you do to your truck today.The 3rd chapter
 

Starting to see some progress on the body, finished getting all the rust off and coated. Did the sandblasting of the cab myself, won't do that again. I sent the rest out to the sandblasters, he's going to epoxy prime for me. Can't wait to start putting this baby back together.

Re: What did you do to your truck today.The 3rd chapter
 

Rebuilt the rear drums. Ended up having to reuse some old springs. New kit wasn't right. And test painted a spare rallye and eyeballed it to see if I'll like the look. Gonna rock these with white letters. Gotta figure out how to secure the caps though

Re: What did you do to your truck today.The 3rd chapter
 

Didn't actually do anything to the truck today but Fed Ex and Purolator stopped by with some goodies for it, which will be installed within a few weeks.

Re: What did you do to your truck today.The 3rd chapter
 

Welded in the patch panel .

Re: What did you do to your truck today.The 3rd chapter
 

Heater Core and AC cleanup, New Fan Switch and Resistor, Seals etc...

https://cache.nebula.phx3.secureserv...c-71b8e7ce97fc

Re: What did you do to your truck today.The 3rd chapter
 

Thats a great idea, No Glare either. looks great.