The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today? (https://67-72chevytrucks.com/vboard/showthread.php?t=368988)

exoticmetalworx 08-19-2012 12:05 AM

Re: What did you do to your truck today?
 
i got it on the road last week took it to the first car show today
http://a6.sphotos.ak.fbcdn.net/hphot...64170185_o.jpg

a37lesalle 08-19-2012 06:41 AM

Re: What did you do to your truck today?
 
Loaded it with some stuff to move to new house. First time I took it for a drive longer than a block. Did find some issues while driving the old girl. But it made it all the way on her own.....with a little bit of a load.

glos55 08-19-2012 08:19 AM

Re: What did you do to your truck today?
 
Ordered 1" lowering blocks and adjustable tracking bar for rear

62 Barnfind 08-19-2012 03:08 PM

Re: What did you do to your truck today?
 
Completed the grill.

http://img.photobucket.com/albums/v3...n/DSC00306.jpg

JPBrecheisen 08-19-2012 03:39 PM

Re: What did you do to your truck today?
 
3 Attachment(s)
Rebuilding and reconditioning the closed knuckle 44 on my 62 K1000. There is obvious damage on the balls, but I got some metal epoxy to spread into the grooves, then I'll fair it down with some emory paper onces its fully cured.

jjzepplin 08-19-2012 03:50 PM

Re: What did you do to your truck today?
 
Bought her a new frame converted to 2wd.

rendus 08-19-2012 03:58 PM

Re: What did you do to your truck today?
 
Took mine on a 60 mile drive yesterday and discovered two things:
1. the throttle spring was too weak and began to stretch causing my throttle to stick
2. a little oil is dripping out my stock oil breather. Not alot, just enough to leave drops and streaks on the valve cover and inner fender.

Today I installed a beefier spring on the throttle linkage (found it in the garage, it's about the size of the clutch return spring, so no worries with it stretching)

My 250 has the stock valve cover and a twist in hole for the oil breather. I had the proform oil breather pictured below but it is push-in. I cut the twist in base from the stock breather and welded it to the base of the proform breather. Fits like it's made for it. I figure the proform is taller and the filter material is a tight enough weave to slow down the oil spray.

http://i48.tinypic.com/105dyeu.jpg

steve'62 08-19-2012 04:03 PM

Re: What did you do to your truck today?
 
62 barnfind, grill looks awesome, I had a 62 so I can appreciate its rarity! It's a love it or hate it relationship for most people on here with the 62 grill!
Posted via Mobile Device

wagonslayer 08-19-2012 05:42 PM

Re: What did you do to your truck today?
 
3 Attachment(s)
Started painting the roof, roll on rustoleum satin white and some silver metal flake for fun.(haven't added the metal flake yet)

LT1 Burb 08-19-2012 08:56 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Started bolting parts back on the frame.

66clow 08-19-2012 09:28 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by fryer1979 (Post 5543244)
It was way too hot today to do much work, and I lost power at the shop almost right after I got there. So all I did was pull my downpipe back off the truck so i can take it into the exhaust shop tomorrow morning and have it shortened a couple inches. All assembled it hung WAY too close to the ground for my taste, it should be good to go by tomorrow afternoon.

:metal:


Too hot for you with a avatar like that!!

198plus 08-19-2012 09:31 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by towersddg9 (Post 5545694)
Decided to go with Dakota Digital

Let me know how you like it, I think I'm going to go with it also ;)

towersddg9 08-19-2012 11:00 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Quote:

Originally Posted by 198plus (Post 5547649)
Let me know how you like it, I think I'm going to go with it also ;)

Thumbs up, its only bout an inch thick fits the bezel much better than the billet piece I had in there, excellent quality you will need to use the oil and temp sending units that are supplied in the kit (tip top on those as well), plus comes with programmable speedo that will replace the cable, I'm not sure on the bezel color yet, been looking for a chrome version but can't find it, I need to stop changing things so I can start driving it, I'll post some better pics in a few days

64thunder 08-19-2012 11:55 PM

Re: What did you do to your truck today?
 
made a rice burner ashamed of his puny 4banger noise with my american six pack
then went around the appt complex giving kids rides in the bed

jsdoyle 08-20-2012 09:57 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by towersddg9 (Post 5545694)
Decided to go with Dakota Digital

That would look awesome in my truck! Let me know if you don't like it! :)

65Gregg 08-20-2012 10:13 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by corvettejim1968 (Post 5545434)
installed these speakers in the dash. pain in the butt took 3 hours. it sounds much better so its worth it.

http://img.photobucket.com/albums/v6...peakers003.jpg


http://img.photobucket.com/albums/v6...peakers001.jpg

Why was it a pain? I have been considering these to use with my iPod.
Posted via Mobile Device

exoticmetalworx 08-20-2012 10:54 PM

Re: What did you do to your truck today?
 
i didnt do any thing but alot of people did for me i got featured all over including video on my first time out in public
video--> http://vimeo.com/47901849#t=177
http://sphotos-a.xx.fbcdn.net/hphoto...33633358_o.jpg
http://a6.sphotos.ak.fbcdn.net/hphot...79346188_o.jpg
http://a5.sphotos.ak.fbcdn.net/hphot...91798233_o.jpg

fryer1979 08-21-2012 01:25 AM

Re: What did you do to your truck today?
 
Tried to work on putting the refit exhaust back on so I can start it up and get the new HEI dialed in better. I really needed to get it done so I could get my other truck in to put new to me wheels and tires on.....I got myself in a rush, and got irritated because nothing was working right. So I pushed the Chevy out and pushed it out of the way. I'll have to come back to it another day with a fresh head.

:banghead:

CRGRS 66 08-21-2012 12:43 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Started getting my garage in order to be my shop for the winter, lot's O' work to do B4 next spring!

The dash is something I grabbed at a swap meet, thought it would look cool in my basement, but, it is still hanging out in my garage.

The steering column is to be rebuilt/painted to replace the wonky one held together with duct tape that is currently in the truck!

CRGRS 66 08-21-2012 12:46 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by exoticmetalworx (Post 5549658)
i didnt do any thing but alot of people did for me i got featured all over including video on my first time out in public

http://a6.sphotos.ak.fbcdn.net/hphot...79346188_o.jpg

That is just plain filthy:metal::metal::metal::metal::metal:

ChrisDollins 08-22-2012 10:49 PM

Re: What did you do to your truck today?
 
My son, Carson, wanted to help me clean on the old truck. Then me and the wife took it out for a cruise. Little man has some growing to do before he can ride in it unfortunately. Here's a few pics.

Chris
http://www.fquick.com/images/vehicle...5168367334.jpg
http://www.fquick.com/images/vehicle...5168367335.jpg
http://www.fquick.com/images/vehicle...5168367336.jpg
Posted via Mobile Device

CRGRS 66 08-23-2012 12:18 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by ChrisDollins (Post 5552935)
My son, Carson, wanted to help me clean on the old truck. Then me and the wife took it out for a cruise. Little man has some growing to do before he can ride in it unfortunately. Here's a few pics.

Chris

Beautiful truck... I like the color scheme too ;)

dantimdad 08-23-2012 01:58 PM

Re: What did you do to your truck today?
 
Last night my son and I disassembled the steering column in prep to shorten it 3", replace the turn signal switch and paint it.

Steven

65Gregg 08-23-2012 02:28 PM

Re: What did you do to your truck today?
 
^^^You going to do a "how to" with pictures?
Posted via Mobile Device

dantimdad 08-23-2012 02:31 PM

Re: What did you do to your truck today?
 
I plan to. I didn't, however, take pics of disassembly.

Steven

198plus 08-23-2012 04:34 PM

Re: What did you do to your truck today?
 
Finished the paint on my tailgate.



http://i88.photobucket.com/albums/k1...1/DSCN2535.jpg

Snowbound 08-23-2012 05:35 PM

Re: What did you do to your truck today?
 
Ordered my TKO-600 today. Started pulling the front clip to make the engine/trans swap easier. Having trouble with the bumper bolts, but the rest of it was a piece of cake.

So much nicer not working on a rust bucket for a change!

Should have the 230/ 3 speed out in a few hours, then spend some time cleaning and degreasing the frame, etc. Maybe throw some chassis black on there and make it pretty.

ChrisDollins 08-24-2012 07:05 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by CRGRS 66 (Post 5553545)
Beautiful truck... I like the color scheme too ;)

Thank you! Great looking truck you have too!

Chris
Posted via Mobile Device

Improbcat 08-24-2012 09:24 AM

Re: What did you do to your truck today?
 
http://farm9.staticflickr.com/8441/7...082dab0b84.jpg

Yesterday I brought my truck home, today, I drove it to work.

jbgroby 08-24-2012 09:41 AM

Re: What did you do to your truck today?
 
wasn't it a great feeling to be the one vehicle on the road that EVERYONE noticed vs. all the cookie cutters?

Snowbound 08-24-2012 10:16 PM

Re: What did you do to your truck today?
 
Pulled the inline 6 today and started cleaning the engine bay. Lots of caked on grease and dirt to scrape off!

Thinking of trying the oven cleaner on it.
Posted via Mobile Device

glos55 08-25-2012 05:57 AM

Re: What did you do to your truck today?
 
Played around with some door art last night...looking for something that will not be permanent so I can change it up from time to time

glos55 08-25-2012 06:00 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
[QUOTE=glos55;5556291]Played around with some door art. It's going to be a vinyl magnetic decal

dantimdad 08-25-2012 11:53 PM

Re: What did you do to your truck today?
 
Started removing the back suspension. Thank God for PB Blaster! I ran out so I couldn't get everything broke loose though.

The rear brakes were even worse than the front. Nothing can be saved including the drums.

Basically everything but the rearend and the trailing arms will be replaced. The PO even had rubber blocks in the springs because they had sagged so badly.

Steven

Rich 5150 69 08-26-2012 01:16 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
Pulled bed off, getting ready for rear tank install. Soaked evryhing down with cleaner will power wash tomorrow.

LT1 Burb 08-26-2012 10:29 AM

Re: What did you do to your truck today?
 
I pulled the longbed off of my parts truck by myself and it sucked, I really gotta get freinds that live closer.

markeb01 08-26-2012 11:26 AM

Re: What did you do to your truck today?
 
That really does look perfect on your truck.

Quote:

Originally Posted by glos55 (Post 5556291)
Played around with some door art. It's going to be a vinyl magnetic decal

http://img687.imageshack.us/img687/8589/imag1300g.jpg

fleetsidelarry 08-26-2012 01:30 PM

Re: What did you do to your truck today?
 
started putting the bed back together:

http://i647.photobucket.com/albums/u...bedside5-1.jpg

http://i647.photobucket.com/albums/u...bedside6-1.jpg

http://i647.photobucket.com/albums/u...bedside3-1.jpg

jbgroby 08-26-2012 06:11 PM

Re: What did you do to your truck today?
 
I like the way you did your saw horses, I was wondering how I could make my bed set straight when putting her back together. I saved one of the pics.

Thanks
Jake

Martin64 08-26-2012 06:29 PM

Re: What did you do to your truck today?
 
Took out the driveline and transmission, unhooked all the wires, cables and linkages from the motor and bell housing to the cab, unbolted the motor mounts and waiting for the engine hoist to come back (on Tuesday). Bolted up the intake, water pump, harmonic balancer and pulleys to the new crate motor that's going in.


All times are GMT -4. The time now is 12:35 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com