Re: New project
I ended up going out 3rd round last weekend . Bad part is i was on . Lights were steller . I was .002 to his .056 3rd round and the truck had run 6.86 all day long . Right after the sun set the track got better bite and it 60 footed . I ended up taking .107 , trusting the truck . Should have backed up , but lost 2 races last time that way .
Anyway i just ordered a new converter to match the motor im putting back together and i'll have this converter cut open and checked out for the 396 over the winter . |
Re: New project
Hey your our there going rounds,, making it back on the trailer under it's own power,,, it's a GOOD day!!
|
Re: New project
Ironman classic in Lufkin today . About to head out
|
Re: New project
Well , change of plans . Decided to run out to Evadale , Ben Bruce memorial airpark and run out their . Ended up with the wind , but something is going away . It was slowing down every run .
http://i47.photobucket.com/albums/f1...ps37zzbptb.jpg |
Re: New project
Leak down was good , trans fluid looked good , inside the filter looks good . Tires are junk with no depth holes . I don't know how I missed that . Swapped tires already and just ordered a set of the pro bracket radials to try out . Last fuel I bought was 90% so I was a touch lean . I put 3 jet sizes into it and cut it back to 85% should be good to go for the National dragster challenge , which I am the defending champ .
|
Re: New project
Quote:
wow, that looks like a cast roller cam? I forget what they call them.. ductile iron?? I didn't know they were fixable.. keep it up Hotrod, WTG.. x2 Marv drive it on the trailer, and its not knockin, its a good day.. |
Re: New project
Quote:
|
Re: New project
Got to 10 cars Saturday night and was just late I was .080 and he was .051 I was dead on 1 and he almost gave it back . Mov was .007 .
Last batch of fuel I got was 93% and it caused me to be lean . I cut 2 jugs with 1 quart of 87 pump gas and ended up with 76% . I blended the 4 jugs half and half and ended up with 2 jugs of 87 , 1 jug of 86 and 1 jug of 85% . I also went up 1 jet size to 99 square . This helped the cooling for sure . |
Re: New project
Been testing on the new Pro bracket radial , but cant really give a good report as I think the sprag is broken in my converter . It will just drill it and 1.51/1.52 and im .008 or im .080 and 1.57 with what feels like it is falling on its face at the shift and 10 numbers slow . I can tell when it does it and I've been spraying it to make up for it , but it is tough to dial in like that . I went out first round Saturday , bought back in and lost third round with a 7.04 on a 6.93 dial not spraying . Sunday I went out 4th round with a slow light from the converter , but broke out cause I was on the spray hard trying to make back up . Im about to go out and start pulling the motor and trans and get it ready for this weekend .
|
Re: New project
Had a busy week , 48 hour work week and working until late to get this thing together . I had a 388 out of the white 79' I sold and bought back . I put the 388 with my "good" glide that I broke the planet in at divisionals . I had a 1.80 straight cut put in it and freshened up . I bought a BTE converter that is 4900 rpm stall . I stuck it all together and threw it in the truck . I got it fired up about 8:30 Friday night and Saturday by 1 pm was on the road untested headed to Lufkin for "Battle of the pines" Ironman race . Pulled it out of the trailer and took it to the shutdown area to warm the gear and found it was rich . Took the 99 square jets out and put 92s in the front with a 4.5 power valve and 95 in the rear . The air to fuel was a lot better . Small leak at the china wall in front and I smeared it with blue RTV and it sealed . Won first round with a .002 light and had the bye second round won third with a good light . Got up for 4th and made 3 mistakes ; not enough burnout , bumped in to deep and anticipated the light to be .-042 red . Best pass was 6.97 worst was 7.00 with the deep bump. Pretty consistant for sure , but slower then my old motor . Next weekend is the season final race . I slide to 11 in points due to the 2 race drop . Need a good weekend coming up for sure . I will be swapping back to the pro bracket radial to start Saturday out also .
http://i47.photobucket.com/albums/f1...ps7kwwod5l.jpg |
Re: New project
Had a decent weekend for the season 11th for the season out of 93 . Local NHRA season is over and the year . I got 1 more IHRA race next weekend , then both of the bracket finals . Plans are to run IHRA in the yellow truck and run NHRA with the blue truck in no E sportsman . We will see . Been a long season and I have had a lot of parts issues for sure .
|
Re: New project
IHRA bracket finals got to 23 cars Fridays gambler , first round runner up for the ironman with a ,043 pack and got to 9 sunday in the gamblers race . 2 more 7.0 index deals and I am ready for a break .
|
Re: New project
Been working on this thing . I ran IHRA bracket finals in this truck and the NHRA in the blue truck at NHRA . Tires are done so I swapped to the 28's off the blue truck and 24" fronts as all I have left 2 index races . Pro bracket radials don't agree with the truck very well . My rear springs are 200# and need to be 130-150# . Calvert cant make me a set , so bias plys it is . Motor seems to be breaking in nicely . ET has dropped to mid 6.80's . Been looking at Champion wheels and will be funding them through a garage cleanout . Fresh front and rear tires for 2016 .
I also still have the rotator from the 396 and I bought a brand new set of pistons for that set up . The block work should be done by Christmas . Im still unsure about camshaft choice . Hoping to start the season faster at like 6.40's that would put me in the fastest 5 cars in my field . |
Re: New project
Well update time . The rotator I hurt in March 2014 is almost done . Block clearenced , bore and hone done , p to v was .080 on the intake and .100 on the exhaust . I had 1.65 Pontiac rockers , so I ended up swapping to crane gold 1.5s . Really wanted a shaft setup , but funds wont allow it right now . The rocker arm swap will give me the extra room I need p to v . Cam is 256/266@.050 and .660/.630 lift . Should work good for what I am doing . 220 AFR heads and my fogger intake . I am also running pump E85 for 2016 . Changing to fenderwell headers to lose some weight and free up some power.
http://i47.photobucket.com/albums/f1...pshkjrf1f3.jpg Sent the converter off to Lenny @ UCC for a freshen up . Also will be having the trans pulled apart and checked out . I also broke down and bought a pump station and got a contract on a mother bottle . http://i47.photobucket.com/albums/f1...psomyehksa.jpg |
Re: New project
:nx:
more power rock on Hotrod :flag: |
Re: New project
When you get it back together I'll have to come out and watch you race. Maybe we can meet up at HMP once I get the Moser rearend in my truck and you can drag what little paint I have on mine off for me.
|
Re: New project
I'll be at HMP on the 16th to run 7.0 . Come on out . Heck bring that thing to Baytown and try out DOT class . Although your probably to fast .
|
Re: New project
Quote:
|
Re: New project
Hotrod are you coming to Baytown at the end of the month?
|
Re: New project
Quote:
|
Re: New project
Got the new motor in and lined out pretty good . 12.5 to 1 on pump E 85 @$1.39 a gallon . Think it has a 10.5 in it , I just got to find it .
http://i47.photobucket.com/albums/f1...ps3n62i7go.jpg |
Re: New project
Damn that could pass for one of my time slips.
http://i15.photobucket.com/albums/a3...pssoe8oqtj.jpg |
Re: New project
sweet wtg HR :chevy:
|
Re: New project
2 Attachment(s)
Little truck is moving on! Haven't checked in on the thread in a while. Was browsing through the hotwheels at Walmart for me.. um, my 4 year old, and found this cool truck that reminded me of yours. Had to share.
Chris |
Re: New project
I like , might have to use those graphics if I ever repaint .
|
All times are GMT -4. The time now is 11:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com