![]() |
Re: My suburban's Twisted Little Sister
1 Attachment(s)
should be soon, but i got myself cornered with the house. now I'm buying NOS mortised lock sets!!! and i pulled all the plastic windows in order from my window guy to make new solid wood sashes for me, the house is from 1919 so I'm keeping it right. once the burb is back and the garage is cleaned and prepped its ON!!!
|
Re: My suburban's Twisted Little Sister
2 Attachment(s)
Quote:
I made these brackets for the front shockwaves. They bolt to the LCA where the original leaf spring used to sit. |
Re: My suburban's Twisted Little Sister
4 Attachment(s)
We got the passenger side wheel tub widened 4". Then added a small angle strip and spot welded the tub to the frame.
|
Re: My suburban's Twisted Little Sister
Fender looks good. Is the body going to welded or hard mounted to the frame?
|
Re: My suburban's Twisted Little Sister
Done my daily exercise.... It includes a lot of head shaking in amaze,net at your progress. Makes my crawling about under my truck for a few minutes look pretty shi7.
Looking good man. |
Re: My suburban's Twisted Little Sister
This build is amazing! I am merely struggling with repairing a few panels and typical rust on mine. Projects like this give me inspiration and some great ideas. Great work and I can't wait to see how it all comes together.
|
Re: My suburban's Twisted Little Sister
Very cool build. Twin turbos off the V12 would be awesome/r
|
Re: My suburban's Twisted Little Sister
3 Attachment(s)
Quote:
Quote:
Quote:
Quote:
Today we finished the last patch on the passenger side wheel tub and started on the other side |
Re: My suburban's Twisted Little Sister
Nice work, what are your plans for interior?
|
Re: My suburban's Twisted Little Sister
4 Attachment(s)
Quote:
We decided to fill in the space from the front of the wheel tub to the frame. We made a panel for the passenger side and welded it in place. |
Re: My suburban's Twisted Little Sister
3 Attachment(s)
We also started working on the rear hatch sill. we cut the last of the old sill off. This showed some rust behind it so we cut some more out which showed more rust. We will have to keep cutting until we find something solid to weld to. We also made the first piece of the new sill so we could test fit it.
|
Re: My suburban's Twisted Little Sister
Coming along really well! The filler panel looks good.
|
Re: My suburban's Twisted Little Sister
Stunning work just as usual
|
Re: My suburban's Twisted Little Sister
Sweet!! How much room will you have between the rear fender and the front seat?
|
Re: My suburban's Twisted Little Sister
MERRY CHRISTMAS EVERYONE
Quote:
Quote:
Quote:
|
Re: My suburban's Twisted Little Sister
2 Attachment(s)
Got some more welding done in the last couple of days, We finished welding the panels at the front of the rear wheel tubs. We also patched the rusty areas at the bottom of the drivers side back corner.
|
Re: My suburban's Twisted Little Sister
Phenomenal work.
Is it me or is the drive line running over the frame? |
Re: My suburban's Twisted Little Sister
[QUOTE=65sub;7414342]
Thanks Rian I'm amazed watching your truck progress too. You're building it on the other side of the ocean from all the suppliers. It has to be quite a challenge at times. Thank you as well. If I were making excuses, that would be one of them, the others include being a white collar worker who has to try out scanners to figure which one fits where, and often having to redo stuff as I cannot "see" the sequences as some people can. Still, it makes for some fun at times. Your progress on the other hand..... Just wow !! |
Re: My suburban's Twisted Little Sister
5 Attachment(s)
Quote:
Quote:
Today we decided to work on the rear lower valance. So to start we drilled some bumper mounting holes. Then we finished making the two pieces ( since my bender is to short to make it in one piece) drilled the holes for spot welding. A bunch of clamps to hold everything in place and then a little welding and it's done. |
Re: My suburban's Twisted Little Sister
Looking good Dale. I'm loving the sheetmetal work.
|
Re: My suburban's Twisted Little Sister
4 Attachment(s)
Quote:
Today's progress we added a couple of sheetmetal corner braces on the back corners. Then we finally removed the last of the cross bracing from the back. |
Re: My suburban's Twisted Little Sister
Good progress with getting the cross bracing out. You guys sure stay at it consistently. I have this week and my knees are pretty sore.
|
Re: My suburban's Twisted Little Sister
Always a good feeling when making progress in the right direction. Mad skillz you have.
|
Re: My suburban's Twisted Little Sister
Nice the rear body is standing by itself :) When you get there if you want a small seat look for one from a Jeep. My CJ rear seat is small 2 adults= real cozy.
|
Re: My suburban's Twisted Little Sister
Great work! - Builds like these have motivated me to learn how to weld and fabricate, need to start somewhere. Keep up the great work.
|
All times are GMT -4. The time now is 03:00 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com