Re: The Snortin' bull
That's a wicked truck!!! Snorting bull!!! Great!
|
Re: The Snortin' bull
Quote:
|
Re: The Snortin' bull
2 Attachment(s)
I felt when rolling the window up and down on left side at time's a slight bind. The Atman latch is tight in the door and the window regulator just slighly caught on a bolt. I had to trim a bit off end of window regulator.
|
Re: The Snortin' bull
1 Attachment(s)
The left door Altman latch also did not go to the neutral latching position each time.The latch has a lever and it hard to see in this picture but one of the mounting plate screws was pressing against the movement and not allowing the latch to relax.Also had to trim the screws to allow no interference,
|
Re: The Snortin' bull
1 Attachment(s)
An upgrade on Accuair I suggest is toss the relay's provided. Both died in a short time period for the compressor's .Upgrade maybe with a better relay here is a Cole Hersee # in the pict's to use.
|
Re: The Snortin' bull
1 Attachment(s)
Some guy's got a tuner.Or a chip .Or programmer .I got a Hot knob. Just turn it and hold on.
|
Re: The Snortin' bull
:thumbs::sumo::mm::bann:
|
Re: The Snortin' bull
2 Attachment(s)
A little pinstripe work on the Bull today. I let him go freestyle. I am very proud a good friend and well known artist on the west coast did this for me. Junior Nelson.
|
Re: The Snortin' bull
2 Attachment(s)
Painted upper bed color to match inside panel's of cab and the roof.Waiting for matte clear to set up in the heat and than age it,Using a little trick I learned from a cabinet maker of all people.The brown paper grocery bag is the sand paper.
|
Re: The Snortin' bull
Looks great...Interested in the brown bag sandpaper trick! Also LOL'ed at the hot water knob :lol:
|
Re: The Snortin' bull
Quote:
|
Re: The Snortin' bull
Quote:
Neat. Love pinstriping as well. |
Re: The Snortin' bull
1 Attachment(s)
The Bull's version of GMC paint scheme has come around to the gate now.
|
Re: The Snortin' bull
1 Attachment(s)
Happy Birthday USA.Could be hood ornament ?
|
Re: The Snortin' bull
Cool hood ornament but I think your truck is cool enough with out it.
Happy 4th |
Re: The Snortin' bull
Quote:
|
Re: The Snortin' bull
3 Attachment(s)
over a harsh bump's and rough road's there was a rattle in the steering column. The Bull has has no rag joint in the column now, what I found was just the inner fender liner (wheel tub) would bounce or flex and hit the steering shaft.
|
Re: The Snortin' bull
1 Attachment(s)
The Snortin' Bull made a stop an AC DELCO warehouse open house car show.
|
Re: The Snortin' bull
1 Attachment(s)
Got an MSD 6A black to install. This kinda step's out of the budget build thought . It could live without it though will run stronger.
|
Re: The Snortin' bull
1 Attachment(s)
MSD what a difference .The Bull drink's thru a Barry Grant Street Demon they like to run fat (rich) a bit.The MSD box cleaned up idle and performance is even better.
|
Re: The Snortin' bull
1 Attachment(s)
Still got the horn's to install. Coming along though in the near future.
|
Re: The Snortin' bull
Very cool truck sir!
|
Re: The Snortin' bull
1 Attachment(s)
By the way a shout out to Bill's Bracket's I have not yet once had to readjust belt's.
|
Re: The Snortin' bull
Quote:
|
Re: The Snortin' bull
Quote:
Glad to hear it's running even better now with the MSD, you've got to love that! |
All times are GMT -4. The time now is 12:56 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com