Re: Project 67 DRGNWGN - 67 Burban!!
and there goes the orange wire..lol. surprised the hole was about the size of a penny.
http://i5.photobucket.com/albums/y15...522_145729.jpg |
Re: Project 67 DRGNWGN - 67 Burban!!
I have just the basics on the drivers side. The fuse panel was relocated to above the trans tunnel and ran to the frame that way..
|
Re: Project 67 DRGNWGN - 67 Burban!!
67s dont have many unnessacery holes.... nice work it should look alot better with a coat of primer
|
Re: Project 67 DRGNWGN - 67 Burban!!
so what are all those little screws coming out of the driver side?
|
Re: Project 67 DRGNWGN - 67 Burban!!
well, i own a bunch of welders. lol. i used a hobart 230 machine for those i believe. i also own a Lincoln 220 and 110 machine. i would use a 220 machine just for the amperage you will need to penetrate. i know some people say they can get a 110 machine hot enough, i could never get it to do it. a welder is a good investment, and over time it may actually make you money by doing jobs for other people.
|
Re: Project 67 DRGNWGN - 67 Burban!!
ya your right. i been wanting to buy a 220 for a while, but its hard to invest in expensive tools because it takes away from my truck for a long time lol.
i thought about turning it into money from other jobs too, but i have a horrible consious (sp?) thats why i dont even want to weld on my own frame...i guess experience would take care of that though.. |
Re: Project 67 DRGNWGN - 67 Burban!!
Quote:
|
Re: Project 67 DRGNWGN - 67 Burban!!
so they can just be cut right off on the firewall?
|
Re: Project 67 DRGNWGN - 67 Burban!!
im thinking also to maybe buy these [IMG]http://*******************/files/imagecache/product/Over_Axle_Lower.jpg[/IMG]from suicide doors and weld 2 pieces of square tubing across the notch and weld a square 3/16" plate across, and mount the top bag to it. the lower bracket is only 30 bucks, and im sure i can rummage around for the tubing and top plate. those kp brackets are nice but they are over 100 bucks shipped!
|
Re: Project 67 DRGNWGN - 67 Burban!!
I thought about those too but decided to go with the under axle ones. Im going to order some sleeve bags tomorrow I think and do Some fab work to get it all to work right.
Posted via Mobile Device |
Re: Project 67 DRGNWGN - 67 Burban!!
Quote:
|
Re: Project 67 DRGNWGN - 67 Burban!!
Quote:
Quote:
|
Re: Project 67 DRGNWGN - 67 Burban!!
ordered the thorbecke bros axle brackets i posted above. should be here middle or end of next week, so maybe next weekend i can tear into it. im hoping this weekend i can borrow my friends cherry picker and maybe get this motor out of here finally!
|
Re: Project 67 DRGNWGN - 67 Burban!!
Quote:
|
Re: Project 67 DRGNWGN - 67 Burban!!
well i still havent gotten the engine puller yet, so i decided to finish up the rear that i started on a few months ago. and heres how it turned out..
http://i5.photobucket.com/albums/y15...529_105953.jpg http://i5.photobucket.com/albums/y15...529_110111.jpg lot better than this... http://i5.photobucket.com/albums/y15...331_193243.jpg still needs a little grinding and then filler but happy how it turned out. this was probably the hardest part i had to replace on this whole truck...lot of body curves and a tailgate hinge to make sure it was lined right, lot of relief cuts and splices. you can see its still a little bent in, but the bumper will cover that anyways ;) |
Re: Project 67 DRGNWGN - 67 Burban!!
nice job a skim coat of bondo and your done
|
Re: Project 67 DRGNWGN - 67 Burban!!
I've seen you around on the forum, but I've never really looked too much into your build. I just read all 16 pages of your thread, and let me just say that you do some impressive work. Keep it up man.
Posted via Mobile Device |
Re: Project 67 DRGNWGN - 67 Burban!!
Quote:
Quote:
well guys, i got my axle brackets in a few days ago, had the day off so i went at it. cut them damn tubs out, that wasnt fun! im having a few problems trying to get everything lined up...some unusual problems. hope to get this all welded up by this weekend. heres a shot with the trailing arms up against the frame, with the bag mocked up. just a teaser til i get everything welded in, but should be what it will look like. http://i5.photobucket.com/albums/y15...602_181345.jpg http://i5.photobucket.com/albums/y15...602_181328.jpg im really considering a spacer between the ta crossmember and ta's because im not really digging the offcentered wheel... |
Re: Project 67 DRGNWGN - 67 Burban!!
burb looks nice, i wish i had a welder that worked ok
|
Re: Project 67 DRGNWGN - 67 Burban!!
Sweet! Looks like your making more progress than I am. I just have an idea and the material. No time though. But here is what I will most likely be doing. Something like this just cut to fit obviously and gussets where they need to be.
http://i408.photobucket.com/albums/p...k/P6032973.jpg http://i408.photobucket.com/albums/p...k/P6032976.jpg |
Re: Project 67 DRGNWGN - 67 Burban!!
Very nice progress!
Hoping to start work on mine in the near future. Congrats on a very cool project!! |
Re: Project 67 DRGNWGN - 67 Burban!!
Quote:
Quote:
well, got everything wrapped up yesterday. it tough trying to weld with a 115 amp welder, i think before i attempt a "Z" im going to get a bigger welder! heres some progress pics from over the weekend.. http://i5.photobucket.com/albums/y15...605_123408.jpg http://i5.photobucket.com/albums/y15...605_123348.jpg http://i5.photobucket.com/albums/y15...605_123301.jpg http://i5.photobucket.com/albums/y15...605_123233.jpg http://i5.photobucket.com/albums/y15...605_123244.jpg was tough trying to get a good angle, but you get the idea! i still might add some 1" spacers between the bag...it doesnt get a lot of lift with this setup..it just clears over the top of the tire at full lift. |
Re: Project 67 DRGNWGN - 67 Burban!!
burb looks good! keep it up bud!
|
Re: Project 67 DRGNWGN - 67 Burban!!
berry nice...about the centered rear wheels,,drove me crazy with mine too we moved mine back and did a triangulated 4 link looks perfect now...mine WAS on the trailing arms too....keep "down" the good work!!!:metal:
Quote:
|
Re: Project 67 DRGNWGN - 67 Burban!!
lol..ya its hideous!
im thinking of putting these mirrors on...i picked them up from a friend from work. he was going to put them on his 87 el camino, but he just went with no mirrors. what you guys think? http://i5.photobucket.com/albums/y15...614_180554.jpg http://i5.photobucket.com/albums/y15...614_180539.jpg |
All times are GMT -4. The time now is 04:15 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com