Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

finally going to get to work on her tonight a little ! Pictures tomorrow !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I hate when you do that!....lol.

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

waiting lol

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

lol me too !!! we go to sleep late , we'll wait

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

^^^What Raul said^^^

You know its tomorrow in Arkansas before it is in Washington...Just Sayin'

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

That nova dash would look great, but what do I know,I have two 72's with stock dashes:lol:
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Lol you guys are killing me ! Chip and I tore it up tonight , the is no longer any part left too let you know that it was a 4x4. ! She is ready to be SLAMMED, ready for a little Scott's action ! Pics tomorrow , thanks for the help tonight Chip !
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

No problem Mike!! I would have never guessed that removing those parts would have been so time consuming!!
Posted via Mobile Device
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Dang rivets.......
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Well here is the pics of our progress last night ! Chip had finished gutting the interior and cleaning off the firewall by the time i got there....then we went to town on removing the rearend and all brackets and hangers associated with it, 3 hours later and multiple grinder and cutting blades here we are !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I waited up all night for this??....lol. good work guys....

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Coming right along. What's up next?
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

LOL.....there is alot more work there then it looks like , getting all of those riveted brackets off the frame is a pain in the arse !
While we are waiting on everything coming from Scott's we will probably go ahead and cut out the rear tubs and floor section and start working on some of the metal work (firewall) and mock up the doors and front end ! I am getting a little excited ! I have a 12 bolt rearend that should be here today, we will strip the brackets all off of it and get it narrowed 3 1/2 on each side so we can get the 12's in the rear ! Lots of fun stuff coming SOON !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looking good those rivits suck monkey balls for sure...

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

thats some serious progress !!!!!!!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looking good Mike...Jim

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

They just take a little practice ;) I've done it so many times I can now remove a trailling arm crossmember in 20 minutes and thats 14 rivets. Seeing how skilled you are in the shop I think you can manage to remove some rivets :uhmk:
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

theres someone on this forum in a verry big hurry to sell off a truck in parts one of those parts is a LQ4 6.0
http://67-72chevytrucks.com/vboard/s...65#post5782265
from wat i understood from his last posts he needs the stuff gone as hes about to loose his workshop
he's in Boston MA though
he has some realy nice wheels under that truck too and a 2wd 4L80e taken from a 2500 hd truck

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

ok, ive got a challenge for you....i dont think it can be done, nor have i seen it done...
it would be a super custom touch that would only have been done by you...
if you are gonna do the 73-80 front end...i bet you cant section the front of the hood lip an inch and section the sides to give the whole front end a "run off" like the 81-87 front ends. that would make the boxy front end sleeker and very one-off.

if you could do this you would be the man!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

i dont know if it can be done, but if it can...you could do it

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

WOW....that would be wild !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Well i decided to get my wife a new Rear end ! I hope she is ok with that not that the old one is bad just thought i would get a newer one and narrow it a little, i told her i only wanted to take 3 1/2 inches off both sides......i think she might have been offended ! LOL, jk Here is her New 12 bolt, degreased, steam cleaned, de-bracketed and ready for the narrowing !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

and while i was doing that Chip (Tireblazin) was unbolting and drilling out the million spot welds holding the rear tubs in place.... we are about ready to start buildin a notch !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Moving right along and looking good...Jim