The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   What did you do with your truck today, take 2 (https://67-72chevytrucks.com/vboard/showthread.php?t=644706)

rrenner 08-24-2015 08:13 PM

Re: What did you do with your truck today, take 2
 
2 Attachment(s)
Attachment 1440099

Attachment 1440100
I hate rust..

Dan in Pasadena 08-24-2015 10:31 PM

Re: What did you do with your truck today, take 2
 
Russ, my sister JUST got done with a year's worth (+/-) of chemo, radiation, etc and they removed the port they'd installed. She doing great AND YOU WILL TOO!

Your "friends-you-haven't-met-yet" here are pulling for you. Positive thoughts coming your way and one of the most positive will be looking forward to cruising your kickass nice truck. All the best, Dan

ChuckDriver 08-25-2015 01:51 PM

Re: What did you do with your truck today, take 2
 
Hang in there Russell, you'll be driving her again soon!!

yoshi 08-25-2015 03:24 PM

Re: What did you do with your truck today, take 2
 
1 Attachment(s)
One of those jobs that "I'll get round to it" Well as its raining I fitted the sound deadening

yoshi 08-25-2015 03:25 PM

Re: What did you do with your truck today, take 2
 
1 Attachment(s)
Then the carpet

yoshi 08-25-2015 03:26 PM

Re: What did you do with your truck today, take 2
 
1 Attachment(s)
& edge trim

rrenner 08-25-2015 04:35 PM

Re: What did you do with your truck today, take 2
 
Isn't it always raining there?

yoshi 08-25-2015 04:39 PM

Re: What did you do with your truck today, take 2
 
Yeah except when it's not

Russell Ashley 08-26-2015 12:23 PM

Re: What did you do with your truck today, take 2
 
Thanks everyone for your uplifting and encouraging comments, and especially thanks for your prayers. I'm feeling positive about the whole thing, as I'm getting the best treatment available, but I'm not looking forward to what I'll be going through for the next two months. I am looking forward to feeling good after that so it will be worth it.

My truck is at the exhaust shop today getting new pipes from mufflers back. The old pipes couldn't be used due to the location of the new shocks. Also, my friend gives a big thumbs up to the Street Demon carb.

bogape 08-27-2015 06:40 AM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by yoshi (Post 7270535)
I'm gonna be busy with these I brought back from my stay in NY

Hi Yoshi...
I'm heading over to New York in October. Is there a good place for parts there close to the city?
....better than Mueseums and sight seeing!

yoshi 08-27-2015 08:08 AM

Re: What did you do with your truck today, take 2
 
Ha ha no, I got items shipped to either hotel or FedEx near by before I left then collected them

thebebop 08-27-2015 09:51 AM

Re: What did you do with your truck today, take 2
 
1 Attachment(s)
What did you do with your truck today, take 2: BLEW the engine. Going down the road last night, smoke started pouring out of the tailpipe...nursed her home and popped the hood...oil all over the engine compartment. Now I'm gonna have to look for a short block : (

crossfire84 08-27-2015 04:24 PM

Re: What did you do with your truck today, take 2
 
Bummer^^^^

47 Fasttoys 08-27-2015 06:51 PM

Re: What did you do with your truck today, take 2
 
Man sorry to hear that, mine blew in my '46 2 months ago. Summit Racing and $1800 later it's running like new. Bite the bullet and go with a crate engine it worked for me.
Rob

1958Warrior 08-27-2015 08:37 PM

Re: What did you do with your truck today, take 2
 
Sorry to hear about your engine Bebob , a crate engine is actually cheaper way to go
but If you ask around you can find a guy like I found Rick at Metroplex Automotive Machine in Balch springs, he does engines for several guys over at the devils bowl in Mesquite , including my neighbor, he can build an engine for you exactly how you want to drive it, yes my 383 was a few hundred more than a crate engine at summit, but I'd feel a lot better explaining a what's going on with my engine to him rather than sending, emails to however trying to resolve a problem over the net.
+ Supporting your local economy . He turned me on to some good parts on the cheap and advised what not to put in , not sure what parts actually make up that crate engine . Stay away from performer products , and pro comp. are a few of the brands that he stressed.

Dan in Pasadena 08-27-2015 11:30 PM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by thebebop (Post 7289412)
What did you do with your truck today, take 2: BLEW the engine. Going down the road last night, smoke started pouring out of the tailpipe...nursed her home and popped the hood...oil all over the engine compartment. Now I'm gonna have to look for a short block : (

Bebop, She's a beauty! Thanks for posting that photo. Mine's a '55.2 too and it's in paint. I like the side emblems but not especially the hood emblem and always wondered what it might look like with good paint and only the side emblems. I think it looks great!

Best of luck on your engine. If it was already a stock 350 I think I'd be tempted to go with a crate short block too.

thebebop 08-28-2015 08:35 AM

Re: What did you do with your truck today, take 2
 
Thanks guys...it's a 400 sbc. Not sure what route I'm going to go at this point. My son really wants to do a big block Chevelle so I might just rebuild it and put it back in prior to selling the truck. I know, I know...sacrilege to get rid of my TF but can only afford to keep one at a time and I really enjoy the build more than the drive : )

If we decide to keep it then I'll probably do an LS1 conversion and IFS front end.

Bomp 08-29-2015 01:26 AM

Re: What did you do with your truck today, take 2
 
Installed the under dash power brake set up.
Didn't like the one I ordered so I fab'd up the pieces myself.
Uses the stock pedal so its at the correct height.
http://i388.photobucket.com/albums/o...psyxljempc.jpg

toolboxchev 08-29-2015 02:12 AM

Re: What did you do with your truck today, take 2
 
Went through all my engine grounds yesterday and today did the rear light grounds.

Man, that makes things a bit better. Ground to clean metal, applied Di-electric to the parts and slathered that stuff on there good.

I have a nice responsive electrical system now.

toolboxchev 08-29-2015 02:14 AM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by thebebop (Post 7289412)
What did you do with your truck today, take 2: BLEW the engine. Going down the road last night, smoke started pouring out of the tailpipe...nursed her home and popped the hood...oil all over the engine compartment. Now I'm gonna have to look for a short block : (

I feel your pain but don't give up, that much works shows your attention to detail and meticulous attitude.

Mistakes happen, its just the nature of what we do.

toolboxchev 08-29-2015 02:18 AM

Re: Last 2 items painted today. Steering wheel and rear bumper strut rod supports.
 
Quote:

Originally Posted by roger55 (Post 7280335)
It feels really good to have all the painting done. It's been a lot of work that's for sure.

I put 3 coats on the strut rods and 4 on the steering wheel.

http://www.hotrodders.com/gallery/da...1/IMG_3206.JPG

http://www.hotrodders.com/gallery/da...1/IMG_3210.JPG

http://www.hotrodders.com/gallery/da...1/IMG_3211.JPG

http://www.hotrodders.com/gallery/da...1/IMG_3226.JPG

So between coats I used free time wisely and bolted the spare tire rack on and then mounted the spare up there. Looks really good but there's was a gotcha.

http://www.hotrodders.com/gallery/da...1/IMG_3199.JPG

One of the 3 lugs twisted right off with hardly any force at all. Well crap. This is going to have to be drilled out and welded to repair meaning I'll have to touch up the paint (I'm still saying I'm done painting though.) I've got exactly 1 pint of green left so at least that's not a problem.

So take a look at the broken lug. It was repaired before! What a poor excuse for a repair job. You can see why it twisted off so easy. There wasn't much holding it.

http://www.hotrodders.com/gallery/da...1/IMG_3188.JPG

You can tell it was a bolt that had been cut with a hack saw and they welded around it and then ground off most of the weld. What a crazy thing to do. The only way to do this right is to drill clear through and weld it from the rear.
I'm also thinking now that I can't trust the other 2 lugs and I should drill those out and do all 3.


Welded Lugs? Never on my 3/4 ton, I would replace em all!

slck57 08-29-2015 08:59 PM

Re: What did you do with your truck today, take 2
 
3 Attachment(s)
Installed brake booster, worked on fitting steering column, and used dummy motor to fab new mounts to bring engine forward 2 inches to help firewall clearance.

crossfire84 08-30-2015 08:50 AM

Re: What did you do with your truck today, take 2
 
nice work.^^^^

rrenner 08-30-2015 11:46 AM

Re: What did you do with your truck today, take 2
 
1 Attachment(s)
Attachment 1441785
Fixin some more rusty stuff..

YahamaR1 08-30-2015 02:17 PM

Re: What did you do with your truck today, take 2
 
Found a Nice rear end to work on

http://i1149.photobucket.com/albums/...A52271DF9C.jpg

Russell Ashley 08-30-2015 06:21 PM

Re: What did you do with your truck today, take 2
 
When I got my truck it had a steel bed floor in it. I replaced it with an original style wood floor and put the cross members back like they were before, with the different one in the wrong location. See it in the pic. The odd one should be in the second from rear location. Just wanted to mention this since the question of the location of the odd cross member has come up before.


http://i91.photobucket.com/albums/k3...ps0svekwx1.jpg

392Hemi 08-31-2015 12:35 PM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by slck57 (Post 7271114)
Tireguy...I went with 450 lb spring rate.

I just bought my kit from speedway and they sent me the 375lb springs because anything higher than that "isn't necessary". Hopefully they sent you what you actually ordered.

slck57 08-31-2015 12:58 PM

Re: What did you do with your truck today, take 2
 
392Hemi....my springs say 450lb on them...thanks for the info.

Tire Guy 08-31-2015 01:01 PM

Quote:

Originally Posted by 392Hemi (Post 7293688)
I just bought my kit from speedway and they sent me the 375lb springs because anything higher than that "isn't necessary". Hopefully they sent you what you actually ordered.

What crap.....
Posted via Mobile Device

dyeBARTdie 08-31-2015 02:16 PM

Re: What did you do with your truck today, take 2
 
Worked on my sons truck yesterday. Cleaned the gas tank and cleared the fuel line. Replaced wheel studs and lug nuts. Installed the new battery tray. We removed the radiator to put in the new one but they sent us the wrong one. Hoping to get the correct one by this Saturday.
Still looking for a drivers side door and a couple 6 lug 15in wheels.

https://scontent.fsjc1-2.fna.fbcdn.n...34&oe=567009DD

CMACDONALD1 08-31-2015 03:12 PM

Re: What did you do with your truck today, take 2
 
2 Attachment(s)
Yesterday I changed the seat in my truck to a 73-87 style, new carpet on the floor and wired in a new stereo. That seat sure gives me more legroom.

OrrieG 08-31-2015 04:01 PM

Re: Last 2 items painted today. Steering wheel and rear bumper strut rod supports.
 
Quote:

Originally Posted by toolboxchev (Post 7291277)
Welded Lugs? Never on my 3/4 ton, I would replace em all!

What color white are your wheels?

yoshi 08-31-2015 04:53 PM

Re: What did you do with your truck today, take 2
 
Glad I'm not the only one who's pictures come out the wrong way

yoshi 08-31-2015 05:14 PM

Re: What did you do with your truck today, take 2
 
1 Attachment(s)
Some friends called round & we went to the NSRA at Trinity Park on Sunday

oldman3 08-31-2015 07:40 PM

Re: What did you do with your truck today, take 2
 
yoshi, nice looking rides...Jim

OrrieG 09-01-2015 12:17 PM

Re: What did you do with your truck today, take 2
 
2 Attachment(s)
Hung all the front tin to help with bolt inventory. Here is a picture of the tin and a bag of bolts that have lost their label. I keep assembly groups together and spent half an hour trying to figure out what these are for; one set of 5 5/16 bolt s and nuts, 8 5/16 nut with washer in two lengths, and 3 each 5/16 shoulder and hex bolts. Front clip, hood, doors and bed bolts are accounted for. All chassis and drive train is installed. Any ideas????

mdpaulson1 09-01-2015 03:11 PM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by yoshi (Post 7294034)
Some friends called round & we went to the NSRA at Trinity Park on Sunday

Looks like a lot of fun! but your on the wrong side of the road!

Russell Ashley 09-03-2015 07:01 PM

Re: What did you do with your truck today, take 2
 
My friend has finished up the things I sent my truck to him to do, and sent me a couple of pics. He says I'm going to love the way it rides, runs, drives, and sounds. I'll be glad to see if he is right but I have to get this cancer thing taken care of first.

http://i91.photobucket.com/albums/k3...pseufhsrtg.jpg

http://i91.photobucket.com/albums/k3...psgpn59hed.jpg

OrrieG 09-03-2015 08:49 PM

Re: What did you do with your truck today, take 2
 
If I was closer my friend I would take you over for a spin...

mphudak 09-03-2015 09:19 PM

Re: What did you do with your truck today, take 2
 
Loving the truck Ashley, i have a big soft spot for the 57's (miss the one i had). Prayers with you for the recovery.


All times are GMT -4. The time now is 04:41 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com