![]() |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
thanks Dale! had a pretty good time, had planned on taking the quad, but a ****** mouse ate my battery cables, so me & dawg went hiking instead...
got a little more on the '66, motor is just about done, got to re-do the throttle return spring, my ham fisted digits gripped my tweezers a little too hard and kinked it in half.... Attachment 1579981Attachment 1579984Attachment 1579985Attachment 1579986 |
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
also got most of the susp done. them are the rims i cobbled together....
Attachment 1579987Attachment 1579988Attachment 1579989 |
Re: '64 chevy 2wd to 4wd
It's looking sharp! I'm glad you and Dawg had a good time.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yeah Dale, even a day in the bush with yer mutt & no quad is still better than a day at work......or with your family....:lol::metal:
got some paint slung on the chassis, still gots to do d-shafts, exhaust, crossmember for the steady bearing (2 piece rr shaft) & all that stuff. found a sheet of bilstein decals in the parts box for the shocks Attachment 1581131Attachment 1581132Attachment 1581133 here's that "bright calypso" paint (another hard to photo color...) Attachment 1581134Attachment 1581135 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
everything is going together nicely on this one-no issues's
should have paint on pretty soon Attachment 1581138Attachment 1581139Attachment 1581140Attachment 1581141 |
Re: '64 chevy 2wd to 4wd
Interior is sharp, it's coming along great.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thanks Dale!
tell ya, this color is impossible to try photo....comes out faded or silver-ish Attachment 1582672Attachment 1582673 different angles, trying to get the green in it to show... everything is just temp, still have to clear the body. just seein' if everything fits......still...usually build them like the factory, chassis & motor together, then the body drop....well the 427 is wider than the 283 & would not fit in there (don't know how i missed that one.....:metal:) pulled the inners out a couple mil's, still not nearly enough, so now it's like how we usually do it after the factory, drop in afterwards...little more work but plus side the engine bay is filled up nicely now.:lol: Attachment 1582678Attachment 1582680Attachment 1582681 |
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
also bought this for $9.99 at the local "trash from china" store..:lol:
snap-tite, no motor, but whatever- just ordered some 40" swamps for it :metal::metal: also grabbed some swamps for the '50 chevy too, what the hey, save on shipping....lest thats what i told wifey... Attachment 1582682 but the blaze is next... |
Re: '64 chevy 2wd to 4wd
It's looking great. The K5 will. Be cool
|
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
yeah, lookin' forward to doing the blaze Dale, if flipping exchange & shipping were'nt so expensive right now, i'd order the '69 grille for it, hard to justify $35.20, more than i paid for the kit....
some pic's of the '66. guess i should have blown the dust out of the engine bay first... Attachment 1583176Attachment 1583177 Attachment 1583178Attachment 1583179 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
for some reason my clear made a mess of the white chevy on the tailgate, hrs of getting it strait, then this. when i'm bored i will fix it
Attachment 1583180Attachment 1583181Attachment 1583182Attachment 1583184Attachment 1583185 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
and (yippy-skippy!) bonus pic's.
had some extra wood left over from the bed conversion... Attachment 1583192Attachment 1583193Attachment 1583194Attachment 1583195Attachment 1583196 |
Re: '64 chevy 2wd to 4wd
It came awesome! The wood stake sides are a neat finishing touch.:metal:
|
Re: '64 chevy 2wd to 4wd
good job, I'm going to do another k model. 62
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thanks Dale!
thanks j.kirn, that '62 your doing, would that happen to be the old AMT/MPC kit? got these rims for the blazer. still not sure, think i'll go dig threw the parts box some more... butt-loads of flash all over this thing, & the bedsides are not very strait or level, check out the topper fitment Attachment 1584272 stockers from the kit Attachment 1584273 the stockers are a little small. this is how they stayed put for the picture.... Attachment 1584274 maybe leave the roof off, one thing that always bugged me, why could'nt chevy make the door line up with the bedside..... Attachment 1584275 .....or the bedside line up with the door (yeah, purists are cringing....:lol:) Attachment 1584276 |
Re: '64 chevy 2wd to 4wd
That's gonna be a cool one
|
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
be cool Dale if i could just figure out what i'll do with it...:lol:
still trying to decide on rims... if ya look closely at the front rim, i drilled out all the "holes" in the rim Attachment 1586028 these are the only other 6 bolts i got right now Attachment 1586027Attachment 1586026 i was thinking this is neat, seperate axles & springs....figured i would just make some lift springs, untill this.... Attachment 1586029 waaaay too short! guess i'm building axles... |
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
one thing i have pretty much decided on is, between the twisted bed rails & warped top, blaze will most likely be topless. scratched up a bar & lights
Attachment 1586030Attachment 1586031 Attachment 1586036 |
Re: '64 chevy 2wd to 4wd
It looks good toppless (I'm kinda fond off topless things lol). The rollbar looks good too. Love the period correct KC lights.
|
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
yup, topless is nice....heh heh...
well, on the hugen hour thing at work again, been slow on the blaze... my even out the door/quarter panel plan does'nt really pan out. the fenders look good lined up with the doors, but the tailgate looks reeeeal goofy raised up to match, so scratch that. decided to try make the top work, figured i would'nt glue the rollbar in so i could go either way, top on or off. started by fixin & straitening out the bedrails & replacing the missing corner of the door Attachment 1587129 Attachment 1587131Attachment 1587132 |
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
.....then the topper.........................
started by just trying to flex it back into place, did'nt really do much.... Attachment 1587133 so, my wife's skinny pigs cage is in my model room, perfect! put it in front of their heater....looks ok except for that weird crease by the door pillar 90 degree.... Attachment 1587134 oh yeah, this is nice.....:metal: so for now she's going topless, if i get the gumption later on, i'll have another whack at it... Attachment 1587135 was kind of a drag, lost a little wind out of the sails, so...... |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
....the postie come to my house today!
just took a quick break off the blazer to play with the humvee i bought at china mart the other week...and the swampers the mailman dropped off. just a snapper, but i think i can detail it up. i love H1 hummers, just too cool! here it is dry fitted, box stock, minus the roof mounted rocket launcher Attachment 1587136Attachment 1587137 plan is to de-militarize it. everything on the roof will be shaved off, & some real hummer worthy tires :metal: cant really narrow the susp on it, so the plan is to also add some fender flares Attachment 1587138Attachment 1587139Attachment 1587140 |
Re: '64 chevy 2wd to 4wd
2 Attachment(s)
he also dropped off these swamps too...:metal:
with our buck in the crapper again, buying from down south is getting progressively more retarded, 'cause i'd like to get another '50 chev kit, or even a donor cab & make a extended cab out of it. i think the porportions would look better than a crew, but, blaze & then hummer first. maybe find something by then... Attachment 1587141Attachment 1587142 |
Re: '64 chevy 2wd to 4wd
The '64 turned out sweet!!! Makes me want the real thing lol...I got some tires from streetscenes.com I think, but when I got them I was kinda disappointed. I ordered 4 sets, 49" Iroc, 44" boggers, 37" Truxus MTs and some "offroad tires" that are baja claws I think. But none of the tires are true to size. The Irocs and boggers are bigger than most tires, but not true to scale. Not to mention skinny as hell. The other two are smaller than many current box tires, so I was pretty bummed when I did some comparing. But I see you get your tires from BNL, how do they stack up? Looks like they are truer to scale. I have all these kits, and no time!!! Or place to do it where my 1.5 year old boy won't get into them. I went to local model show and picked up a crew cab to match my 99, just gotta find all the pieces....
|
Re: '64 chevy 2wd to 4wd
It's a shame about the top but the roll bar will look awesome. I have faith in ya..
|
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
well, i tell ya, this was NOT my week....big hrs at work, big injury bills....
i think i mite have mentioned once or twice about all the work i've had done on my teeth in the last couple yrs, well 4 yrs of pain & around 8 or 9 grand went strait down the tubes yesterday...... and then some...wanna talk murphy's law? going up the ladder yesterday, someone yelled look out, looked up just in time to see a carpenters 30 oz framing hammer nail me (sick pun...) right in the face.....more specifically, my mouth....kinda a yucky picture, took this after i got back from the dentist, yeah, i'm still dirty, went right from the job to the dentist. $851 for emergency Attachment 1588374 got a fat lip, pretty sure i swallowed the bottom tooth, snapped the top one in half, and the 2 on the right top & 1 on the top left beside the half tooth, broke completely threw. the dentist shoved them back up & now i got big chunks of wire & glue behind them temp holding them in till work can start. they are not savable- broke completely threw. almost impossible to eat, even grinding my food into a pulpy mash aint working.....she's telling me i will need 3 root canals & 2 bridges....ya-frikin-hoo.... and she will also need thousands of dollars. my boss, who is a stand up guy, will pick up the tab for everything. neither of us wants to go threw all the bs of WCB crap, so i'm completely good with that. takes some of the sting out, but dont really do much for all the needles i know are coming...lol going back in tomorrow for a 5hr "visit" oh boy..... off work for a few, so i'm hoping to get some stuff on the blaze done, if i can keep my lips from draggin' on the floor :lol: i had just primered the int in prep for color before this happened, not much, but it's all i got. i was able to do something simple today, i cut out the hummer's roof Attachment 1588375Attachment 1588376 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
Quote:
i too would love to get a 1:1 '66 i buy all of my tires from from these 3 guys. BNL, as you mentioned, the sizes are good & fairly accurate, but he uses open molds of some sort, so you have to completely clean up the back of the tire. ScenesUnlimited, he has very nice tires & rims. his tires are rubber- no resin. sizes are very good & accurate, he actually takes the time to correct a lot of tire defects, like the revell groundhawgs, 2 of the tires are backwards, he corrects stuff like that so you have 4 properly labeled, properly directional tires. he just finally released some beautiful skinny luggers, only stock size (around scale 31"er's) but i will be ordering some if our crap dollar can ever be worth anything....:lol: some of the best tires, in my opinion, comes from FireballModelworks his tires are extremely accurate, detail & size wise. he does his tires in some kind of "rubber" that feel just like real tires, there flexible & i think he does some kind of injection molding, the tires come with just 1 tiny nub on the tread from being cast, no "around the tire seams" to sand off. he also does very nice 3-d stuff, i buy gm truck door handles from him check out the detail & quality Attachment 1588390Attachment 1588391 i have bought multiple sets of his bfg krawlers, they really are a beautiful tire, only downside is 35"er's is all there is. some bigger ones would be nice.... Attachment 1588392 even has "weighted" tires for that kind of look Attachment 1588398 here's them door handles i was telling you about. and their cheap-$3 bucks for a rack of 4 sets Attachment 1588399 and yeah, just finding everything you need for a truck build is half the challenge! and how true, when my rugrat was young, he "re-arranged" the sheetmetal on a nice 1/16 '57 chev i had built....:metal: |
Re: '64 chevy 2wd to 4wd
Ouch...take it easy and get all fixed up. I'm glad you stayed on the ladder and make things worse.
|
Re: '64 chevy 2wd to 4wd
Quote:
been roofing so long, instinct took over right away, clamped on to that ladder like you would'nt belive :lol: smashed teeth and ringing bells are much better than falling 20 feet to the concrete i guess..... countdown is on, 11:00 am, going in for the first visit of probably many...ewhhh! |
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
welp, the dentist visit was not bad at all today...
of the 3 teeth that got knocked loose, (she showed me the x-rays, they came out 4.8 mm, 3 mm is considered a pull-out...) one for sure can be saved, it's tightened right up, the other 2, still not sure, a little tighter, but still broke through. she thinks one of them may be "knitting" itself..so no work today. she does not want to disturb it just yet, so next friday the re-constructive stuff starts. still sucks i got to walk around for a week with some dumb-ass wire stuck in my mouth.... but i did get a couple things done. got some bodywork on the hummer. dont know how a chopper is supposed to lift yer hummer from the mud bog with these sling hooks...proper ones going on Attachment 1588774 filled in some military holes, chopped off the low mount air cleaner, be putting a proper hummer snorkel on it, and opened up the front wheelwells a few mils for more even clearance on the swamps. Attachment 1588775 a little base paint on some stuff. rims are the truck color, and my longer snork Attachment 1588776 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
also managed to get most of the blaze's int done. still needs seatbelts & a couple other minors....
Attachment 1588777Attachment 1588778 Attachment 1588779Attachment 1588780 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
huh, just half to knock half yer teeth out and you'd be amazed how much you can get done...lol
hope the wife don't see this....get any idea's...:lol: the hummer is a pretty basic truck, so it's going a lot faster than the blaze. did manage to suck the wheels in a bit, but still getting flares Attachment 1588897Attachment 1588898 just got the green sprayed, nothings detailed yet. italian (??) olive green Attachment 1588899Attachment 1588900Attachment 1588896 |
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
building some axles for the blazer right now. shifters installed
Attachment 1588901 |
Re: '64 chevy 2wd to 4wd
Everything is looking great. Have you figured out how to eat?
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
pretty much cant bite anything Dale, doc figures a couple months or so before i should be able to bite decently.....try to eat on my back teeth, but when yer chewing & your teeth touch together......jeez, nasty pain threw the 3 that got knocked out and are trying to get home....literally just toss the food down my gullet, dont really get to enjoy the taste, but hoping fri she can get something going...
and i AM getting some stuff done around the house (hunger does that...lol) hummer went together pretty fast. it's simple, but i like 'em. thinking i mite lower the lite bar a bit more.. Attachment 1589120 Attachment 1589116Attachment 1589117Attachment 1589118Attachment 1589119 |
Re: '64 chevy 2wd to 4wd
For a snap together you got amazing detail on it. I agree on lowering the light bar. The Blazer interior looks fantastic.
|
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
thanks Dale!
was a quick, easy one..ya, bar was too high... Attachment 1589912Attachment 1589913Attachment 1589914 |
Re: '64 chevy 2wd to 4wd
Yep, that looks much better.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thanks Dale, but i really need to get my eyes checked, that snork aint very strait....:lol:
little more blazer stuff... 300 horse 350. battery cables look a little big, smallest wires i got left. thinking i'll have to take apart another old cassette deck in the shop... Attachment 1590980Attachment 1590985 Attachment 1590982 spent a few hrs working on rims. the rim lip fits in the hole, but there was a gap around the rest allowing it to rock, so they got a strip of styrene. the inners (from the kit) i cut the mounting hub off, drilled 'em out for my axles, then had to sleeve them with 2 strips of 015, one piece of 030 was to thick too bend nice and round. the rears i added brake backing plates, the fronts will be disc. also had to sleeve the steelie spare rim to fit the tire wit 2 strips of 015 as well Attachment 1590983 first coat of primer, little more bodywork to do... Attachment 1590984 |
All times are GMT -4. The time now is 01:38 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com