|
Re: project INCREDIBLE HULK 6.2L with 6L80E
ctrow, it was nice meeting you and your dad too..
little progress to report, been working on the hood shocks...fabbed up a lower mount that uses the 2 outboard bolts for the PB hood hinges, then welded a extension piece on the hood hinge arm... it wokred out well, now since i have the driver side made (more like the geomety figured out..) the pass side should go by alot quicker... http://i25.photobucket.com/albums/c8...k/P4190043.jpg http://i25.photobucket.com/albums/c8...k/P4190044.jpg http://i25.photobucket.com/albums/c8...k/P4190045.jpg |
Re: project INCREDIBLE HULK 6.2L with 6L80E
lookin good!
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
looking good Don!
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
Really coming together... the fab work is phenominal!
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
I like the idea of running the fuses out of the side cowl, wiring is going to look very clean.
I was thinking about upgrading my wiper system to a newer model vehicle that is sealed, so you no longer need that wiper cowl drainage system. I was going to start hitting some junkyards and matching windshield sizes and see what I could come up with. Full size BMWs and Mercedes have a very nice structural wiper system that would probably require some minor fabrication...that is if the windshield sizes were similar. |
Re: project INCREDIBLE HULK 6.2L with 6L80E
got the hood hinges made and installed, was going to 'hide' them in the wiper cowl area and use some bellcranks and rods to connect everything, but brother talked me into keeping it simple...and this way, it also isnt a maintance nightmare.....also brother and i got the bed installed (the body lines dont line up, due to the bed wood not being installed) but you get the idea of how it"ll look with 22s on there....also threw the grille on there as well...
http://i25.photobucket.com/albums/c8...k/P4230033.jpg http://i25.photobucket.com/albums/c8...k/P4230034.jpg http://i25.photobucket.com/albums/c8...k/P4230032.jpg http://i25.photobucket.com/albums/c8...k/P4230035.jpg http://i25.photobucket.com/albums/c8...k/P4230031.jpg http://i25.photobucket.com/albums/c8...k/P4230030.jpg http://i25.photobucket.com/albums/c8...k/P4240037.jpg http://i25.photobucket.com/albums/c8...k/P4240036.jpg |
Re: project INCREDIBLE HULK 6.2L with 6L80E
Nice progress. Hinges came out cool. Looking good!
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
Damn she is really comming along..
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
i have kept up with your post from the start and never realized you are from Tulsa, i would love to meet you and check out your truck
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
Holy freakin' cow... that looks good.
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
Love the hood section (and the rest too)!
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
wow that looks bada$$ man. If you would could you "pm" me the price for the brake system, would love to get it for truck....someday.
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
Quote:
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
5-600$ i believe!
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
I tried to find where the filler panel was bought. But no luck. Where did yo uget it. I love the look.
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
Quote:
Quote:
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
I love the strut setup with the pb hinges. I'm doing that to mine. Where did you get the struts?
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
care to share the dimensions or the pattern for your hood strut pieces and part number for struts ??? it could sure help alot of us
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
Thought for a minute there was an update.
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
Damn. Amazing build!
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
where the updates,and is this all you do for a livin or you got another job,damn u got sum mad skills with that metal work,nice build and look forward to the rest.
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
I agree! Awesome build!
Posted via Mobile Device |
Re: project INCREDIBLE HULK 6.2L with 6L80E
Yea we have been waiting patiently....
Posted via Mobile Device |
Re: project INCREDIBLE HULK 6.2L with 6L80E
Quote:
http://www.67-72chevytrucks.com/vboa...d.php?t=405465 out, before i jump on hulk again...it'll be about 2 more weeks (porterbuilt stlye:)) till i get going on it again |
Re: project INCREDIBLE HULK 6.2L with 6L80E
that's very cool making that removable
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
Very nice!!! When I get around to my "dream truck" build...I plan to make the engine the "jewel" in the engine bay with everything else hidden also....
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
wow awsome work under the hood, ware did u get the hood struts to go with the porterbuilt hinges??
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
:jdp:
Killer, to say the least. |
Re: project INCREDIBLE HULK 6.2L with 6L80E
nice work Don!
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
well.... i sure dont get much SMOOTHER than that, nice work
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
My metal work doesn't look that nice after I cover it with bondo and paint.:lol:
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
looking very nice
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
Wow, incredible work! It looks like that engine was built just to fit in that truck!
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
Very Slick Craftsmanship, did we ever figure out what the dimensions are on the radiator? I was looking at the Howe site and wasn't sure....
Thanks |
Re: project INCREDIBLE HULK 6.2L with 6L80E
its this radiator
http://www.summitracing.com/parts/HRE-342E/ |
Re: project INCREDIBLE HULK 6.2L with 6L80E
that engine bay idea looks killer man!
not that you need to, but i think if you made 1 more piece to make it flow from the firewall that would make it look that much better! either way, thats a great idea you got there... |
Re: project INCREDIBLE HULK 6.2L with 6L80E
I could not find that filler panel on the Scott's web page? Was that a one off for your truck? Any way it looks great on your truck, keep it up!
|
Re: project INCREDIBLE HULK 6.2L with 6L80E
ok time to get the cob-webs off this thread...ben making some progress, but havent uploaded (until today) pics, due to my computer is on its death bed...but here are some updates non-the-less...
got a neat power steering pump resivoir that canton racing is now making, its a sweet aluminum peice with -6 an ftngs... http://i25.photobucket.com/albums/c8...k/PC270042.jpg http://i25.photobucket.com/albums/c8...k/PC270043.jpg |
Re: project INCREDIBLE HULK 6.2L with 6L80E
then i started my attention on the air intake system..since everything looks symetrical under the hood, it made sence to make the tube 'y' off the throttle body, rather then go to one side or the other..also we didnt want the airfilters to be seen or hard to get to (more on this later)...so with all this in mind, i made the 'y', cut holes in the inner fenders, welded a 4" pipe to them to make a bulkhead, then put a 90* boot on there, and made the dual ram air inlets...the placement of the in lets were determinded by a couple of factors, i wanted them to be up high enough that road debris wouldnt get in there, the outlet of the bulkhead going thru the inner fenders, and the structual design of the radiator support... with all that to work off of, the placement was determind to be up high, and to the inboard of the headlights..
here are a few build process pics, the inlets measure 6" across, and 4" wide... http://i25.photobucket.com/albums/c8...k/P2020119.jpg http://i25.photobucket.com/albums/c8...k/P2020120.jpg http://i25.photobucket.com/albums/c8...k/P2020121.jpg http://i25.photobucket.com/albums/c8...k/P2020122.jpg http://i25.photobucket.com/albums/c8...k/P2010103.jpg http://i25.photobucket.com/albums/c8...k/P2010105.jpg http://i25.photobucket.com/albums/c8...k/P2010106.jpg http://i25.photobucket.com/albums/c8...k/P2010107.jpg http://i25.photobucket.com/albums/c8...k/P2010108.jpg http://i25.photobucket.com/albums/c8...k/P2020112.jpg http://i25.photobucket.com/albums/c8...k/P2010102.jpg http://i25.photobucket.com/albums/c8...k/P2020111.jpg http://i25.photobucket.com/albums/c8...k/P2020116.jpg http://i25.photobucket.com/albums/c8...k/P2020117.jpg http://i25.photobucket.com/albums/c8...k/P2020114.jpg http://i25.photobucket.com/albums/c8...k/P2020115.jpg http://i25.photobucket.com/albums/c8...k/P2020118.jpg http://i25.photobucket.com/albums/c8...k/P2020123.jpg |
| All times are GMT -4. The time now is 08:17 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com