Re: Do you need '64-'66 Chevy Truck Parts?
 

...do you have a steel fan shroud v8 this truck had one looked odd though i remember it from when i was a kid but i think a water pump let go and killed it and the radiator the shrouds i have found are like fiberglass can you shed some light or do you have ?? if so how many $$$$ would it take to buy and ship 37659
o...what about a upper radiator pipe it used to have one of those too :but:
thanks,
jason
there has to be something i can buy :metal:

Re: Do you need '64-'66 Chevy Truck Parts?
 

towrecker:

Thanks for the prompt reply. The factory fan shroud for the V8 trucks was fiberglass. I don't have any right now, however, you can get them at:

www.lmctruck.com
www.classicparts.com
www.oldchevytrucks.com
www.bowtiebits.com

If you need the upper radiator hose for a V8, I sell the hard pipe radiator hose like this:

http://67-72chevytrucks.com/vboard/s...d.php?t=322792

This kit includes the hard pipe, four tower clamps and two starter hoses. The complete kit is $50.00, plus $9.95 packaing & shipping.

Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I would like to find a nice 1964-66 left drivers door custom cab moldeings. Ship to 91340.. Have a nice tailgate to trade??? Thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good evening and thanks for the inquiry. I have a few nice sets fof 4-5-6 Chevy truck Custom cab sails.

Is the tailgate a fleetside or stepside? Chevy or GMC?

Please let me know and I will reply accordingly. Thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Fleetside tail gate very nice from calif

Re: Do you need '64-'66 Chevy Truck Parts?
 

chevrolet

Re: Do you need '64-'66 Chevy Truck Parts?
 

I have sent you a PM.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Do you have the throttle rod and swivel for a 63 chevy v8 4 bbl. That was taken off my truck before I got it. I'm unsure if a 6 cylinder one is different, but I need to connect to an eldelbrock carb. I'm at the lake of the ozarks zip 65037. Thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

do you have drivers door for 65 C-10fleet with wing window. how much &shipped to 60002? thanks jw

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good morning and Happy Easter. Thanks for the inquiry. I know what you mean by the throttle rod, but I am unsure of what you mean by the swivel. I have factory V8 throttle rods and the accelerator assembly at the firewall, so if that is what you mean, I can help.

Please clarify what you need and I will reply accordingly and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

jw:

Good morning and Happy Easter. Thanks for the opportunity. I sell good, used door shells for $175.00, plus shipping, via Greyhound-Freight. You will have to pick the item up at the Greyhound terminal nearest your location. Greyhound-Freight costs $85.00.

Please let me know if I can help you with this item or other good, used 4-5-6 Chevy trucks parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony,

Happy Easter to ya and tell me, what do you get for a bench seat for my '66..?

Thanks.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Sorry I was not clear, not having one I was unsure the correct wording. I need the rod that connects the part on the firewall and the end piece that threads on to the rod and fits in the carb allowing length adjustment. I'm unsure if it fits on a ball mounted on the carb or if it fits in a bushing in the carb and has a clip that holds it on. I called it a swivel because LMC call the clutch adjustment rod end piece a swivel -thanks again

Re: Do you need '64-'66 Chevy Truck Parts?
 

hey lilred,
im looking for an intake manifold for the 315e gmc. please let me know if you have one and how much. also a fuel gauge for a 63 gmc would be much appreciated.

Re: Do you need '64-'66 Chevy Truck Parts?
 

sorry about that lilred, the intake needed is for a 351e

Re: Do you need '64-'66 Chevy Truck Parts?
 

Do you have any steering columns for 66 Chevy truck?

Thanks,Jimmy

Re: Do you need '64-'66 Chevy Truck Parts?
 

66BowTieBoy:

Good afternoon and thanks for the inquiry. I have a few very nice factory bench seats, but the shipping would make them uneconomical. Have you checked craigs list in your area?

Re: Do you need '64-'66 Chevy Truck Parts?
 

jame:

Good afternoon and thanks for the inquiry. I have a throttle rod for a factory V8. It attaches to the carburetor at one end and to the accelerator linkage at the other end. It is $25.00, including the ride.

Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Adrian:

Good afternoon and thanks for the inquiry. I tried to send you an e-mail at the address you provided this morning, but it kicked it back. In any case, I don't have a factory 351E V6 intake manifold. I have put out a few feelers and will try to locate one for you.

Sorry I couldn't help you with this item, but please keep me in mind for other 4-5-6 Chevy/GMC truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Jimmy:

Good afternoon and thanks for the inquiry. I have a few factory steering columns. Do you need an automatic, three speed or floor shift column? Please let me know and I will reply accordingly. Thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

The floor shift column,

Jimmy

Re: Do you need '64-'66 Chevy Truck Parts?
 

Jimmy:

Thanks for the prompt reply. I have a few factory floor shift columns. Without the steering wheel, a good, used factory floor shift steering column is $100.00, plus $42.00 packaging & shipping, via UPS or FedEx-Ground.

I accept cashiers check, money order or PayPal at:

4-5-6chevytrucks@sbclobal.net

Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

hey lilred i was wondering how much you would sell me some wheel tubs for either year i do need a good pair.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony,

I'm in KC from time to time and maybe I could pickup at your place..? Need the whole thing, (seat & mountings). So what would it cost me?
Thanks.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Sal:

Good morning and thanks for the inquiry. A good, used set of rear fleetside wheel tubs is $125.00, plus $45.00 packaging & shipping, via UPS or FedEx-Ground.

Please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the prompt reply. A good, used factory bench seat with good, with original upholstery (one small tear) and factory seat tracks is $120.00, picked up at my shop in Kansas City, KS.

Please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Do you have any H033 rear axle parts?such as the differential? any help is greatly appreciated thanks Bill:metal:

Re: Do you need '64-'66 Chevy Truck Parts?
 

Bill:

Good afternoon and thanks for the inquiry. I have half a dozen factory 6 lug rear-ends, but I haven't checked the tag on any of them, so I don't know if they are HO33. If the tag is missing, will the HO33 be stamped on the passenger side axle tube? If so, I can check them. I see you are in Omaha, NE. Do you get to Kansas City much? If so, I can meet you at my shop and check out what I have. Please let me know your thougths and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

soory i havent got back to you on the wheels tubs so what am i looking at if i get some that it fair shape or along them line?

Re: Do you need '64-'66 Chevy Truck Parts?
 

I either have a great set of a set with some rust on the flanges, so what is acceptable?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Tony,

Do you have a nice clean 6 lug steel 15 x 5.5 wide wheel? If so how much with shipping to 77510. I need a spare for my 59 Apache.

Thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good evening and thanks for the inquiry. I don't have any of the skinny factory 6 lug steel wheels at this time. Sorry I couldn't help you with this item, but please let me know if I can help you with other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

could you post pics of both?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hi Lil Red,
Do you have factory components to add power steering to my 66 GMC 351E? I'm trying to find stock before I consider the later model conversion. I understand the brackets for the 351E a difficult to come by. Thanks.

Dennis Arseneault
'66 GMC LWB Fleetside 351E
Avondale, AZ

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hi Tony, I'm in need of a front clip for my 63. The rad support is rusted through at the body mounts. Taking it apart found I need everything. Grill support, radiator support, both inner and outer fenders. I see all the suppliers sell repo stuff. Since your pretty close (only about 2.5 hours) thought I would see if you have a rust free set up. My cab is pretty rough aswell - I would consider a cab swap or even a complete parts truck if you have a fairly rust free one with out a title or no drivetrain ect. I'm not partial to 1963 items actually wanted a 64-6 in the begining but this is what I found. It has turned out much worse than first expected. Thanks Jame

Re: Do you need '64-'66 Chevy Truck Parts?
 

Lil Red,

I need a pair of good OEM trailing arms? I think they are all the same 60-66?

happen to have any?

thanks in advance

Re: Do you need '64-'66 Chevy Truck Parts?
 

Dennis:

Good afternoon and thanks for the inquiry. Sorry for my delay in responding. I don't have any accessory items for the 305 or 351 GMC V6 engines. Sorry I couldn't help you with this item, but please let me know if I can help you with other '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Jame:

I sent you a PM regarding a '60-'63 Chevy C10 front clip and cab. Please let me know if I can help you with these items or other '60-'66 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good afternoon and thanks for the inquiry. I sent you a PM about the trailing arms.

Please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Do you have one of these ? It's for the basic heater or whatever it's called out of my 63 truck. It's the heater that is completely self contained under the dash and not in the engine compartment.

I need a decent one to powdercoat. Mine is tweaked a bit too far to ever be repaired again.

http://i276.photobucket.com/albums/k...63chevy028.jpg
http://i276.photobucket.com/albums/k...63chevy029.jpg
http://i276.photobucket.com/albums/k...63chevy030.jpg