The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 16 of 24 « First 61112131415 16 1718192021 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)
-   -   The 283 Rebuild Begins (https://67-72chevytrucks.com/vboard/showthread.php?t=299814)

MacAttack 06-22-2009 02:39 PM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by jgh64pkup (Post 3373733)
you need a digital camera so you dont have to torture us with those crazy pics off the web
Yeah - if I had a nickel for every time I've heard that.......maybe my grandson will get one for his 3rd birthday on the 11th.

Mac. :lol:

1964C10 06-22-2009 02:44 PM
Re: The 283 Rebuild Begins
 
Ok so I googled "surf city" and came up with nothing in CA excepted that certain cities think of themselves as surf city, where do you all home Mac?

MacAttack 06-22-2009 02:53 PM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by 1964C10 (Post 3373797)
certain cities think of themselves as surf city,
The only one that went to court for the licensed name. ;)

http://latimesblogs.latimes.com/lano...anta-cruz.html

Let's put it this way - I don't live in Santa Cruz (too bad).

Mac.:mm:

jason65 06-22-2009 02:57 PM
Re: The 283 Rebuild Begins
 
Ahhhhhh yes. A small back window shloooong bed. Good lookin truck Mac.
Are those 40 series flowmasters?

MacAttack 06-22-2009 03:08 PM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by jason65 (Post 3373822)
Are those 40 series flowmasters?
Sharp eye there Jason. Yes they are. Set off all the car alarms in the neighborhood when they were on my Chevelle, dumping just in front of the real axle - so I had them cut off and saved them for the truck.

Mac. :lol:

1964C10 06-22-2009 03:21 PM
Re: The 283 Rebuild Begins
 
Thanks for the update. I didn't realize that!

protrash64 06-22-2009 08:28 PM
Re: The 283 Rebuild Begins
 
Hey Mac.....first off congrats on the break-in. I was wondering about the resonators you mentioned. What, where, and do they tone it down a bit? I have the 40's dumpin' in front of the rear tires and it about knocks stuff off the walls. I wouldn't mind turning it down to about 7.:lol:........thanx.

jgh64pkup 06-22-2009 10:44 PM
Re: The 283 Rebuild Begins
 
all of yall with original 40 series flowmasters are lucky im stuck with the delta force 40 series flowmasters they sound nothing like the originals and arent very loud either:no:

Alan's Classic 06-22-2009 11:58 PM
Re: The 283 Rebuild Begins
 
Congrats on the progress, I'm happy for you!! :metal:

MacAttack 06-23-2009 10:24 AM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by protrash64 (Post 3374378)
I was wondering about the resonators you mentioned. What, where, and do they tone it down a bit?
Summit Racing: Hedman Hedders 17120 - Hedman Hot Tips Chrome Exhaust Tips: $23.95

http://www.summitracing.com/parts/HED-17120/

But be aware - these are only 2" diameter inlets and 2.5" outlet, so if you’re going for big time street performance - forget it. My small block has a stock cast iron manifold and a two barrel Rochester, so don’t consider these particular parts if you’re pulling a big CFM carb. There has to be somebody else in the Summit line (or Jegs) that carry larger diameter units. The main effect of the resonator tips I have is it curbs that ‘drag strip’ thunder just a bit. Like I said before - when I ran the mufflers on the Chevelle I thought I was going to have to go to the dentist regularly to have my fillings replaced. Great for 1320 feet (oh, sorry: 1,000 feet now), but not for a hundred mile road trip.


http://static.summitracing.com/globa...-17120_w_m.jpg


Quote:
Originally Posted by jgh64pkup (Post 3374646)
all of yall with original 40 series flowmasters are lucky im stuck with the delta force 40 series flowmasters they sound nothing like the originals and arent very loud either:no:
Yeah, I hate when that happens. It’s almost like the muffler manufacturers need showrooms with either ten engine/muffler set-ups or at least audio recordings of what they’ll sound like.

Quote:
Originally Posted by Alan's Classic (Post 3374814)
Congrats on the progress, I'm happy for you!! :metal:
Thanks Alan, it has taken about five times longer than it should have - but I’ve learned a great deal along the way, and without a back-up vehicle it would have been a butcher job that I would have ended up fighting for its first 50,000 miles

Mac. :chevy:

protrash64 06-23-2009 10:31 AM
Re: The 283 Rebuild Begins
 
Thanx for the info on the tips, Mac. I will be looking into those after I do some engine upgrades that Ive had planned.

jason65 06-23-2009 12:26 PM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by jgh64pkup (Post 3374646)
all of yall with original 40 series flowmasters are lucky im stuck with the delta force 40 series flowmasters they sound nothing like the originals and arent very loud either:no:
Super 44 series.;)

MacAttack 06-24-2009 04:54 PM
Re: The 283 Rebuild Begins
 
Off to home to have 'The Tan' towed - one last time - to HB Transmission.:metal:

jgh64pkup 06-24-2009 06:40 PM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by jason65 (Post 3375377)
Super 44 series.;)
what about super 44 series
how about outlaw race series

4dranch 06-25-2009 06:09 AM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by MacAttack (Post 3377820)
Off to home to have 'The Tan' towed - one last time - to HB Transmission.:metal:
A re-build or something new??

jason65 06-25-2009 07:13 AM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by MacAttack (Post 3362874)
The transmission (TH350) has already been rebuilt. It's the one I cracked the case on and had to get welded (Do'h!). This guy does just about everything drivetrain wise, so I'm commissioning him to do the following:

A./ New rear end (freeway friendly) gears.
B./ New brakes - including refab on the emergency brake bracket.
C./ Fab, install and adjust kick-down bracket assembly for the tranny - at the carb.
D./ Install 2" shorter front springs and replace rubber & parts while there.
E./ Lengthen the forward drive shaft and replace "U" joints.

Because of work going on at the house, I need him to keep the truck for two weeks - he's relatively slow right now - so the timing is nearly perfect.

Mac. :chevy:
Some of this right here.^^^

4dranch 06-25-2009 07:37 AM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by jason65 (Post 3378913)
Some of this right here.^^^
Thanks Jason.
No one really reads what Mac writes...
They just come here to look at the pictures...:lol::lol:

jason65 06-25-2009 07:52 AM
Re: The 283 Rebuild Begins
 
I try to read everything incase I want to steal an idea and adapt it to be different. But I do the same thing sometimes Scroll, words, scroll, words ooh ooh pictures, scorll, words, scroll, words. But on my circle of friends threads I make sure I read every word and study every pic.


Don't forget to swing the tranny guys place and get progress pics Mac.;)

MacAttack 06-25-2009 09:48 AM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by 4dranch (Post 3378927)
Thanks Jason.
No one really reads what Mac writes...
They just come here to look at the pictures...:lol::lol:
Oh gee - who didn't see that one coming.........? http://tbn2.google.com/images?q=tbn:...f84a59171b.jpg

Quote:
Originally Posted by jason65 (Post 3378934)
But on my circle of friends threads I make sure I read every word and study every pic.
As do I, my good friend.;)

Mac. :chevy:

4dranch 06-25-2009 11:42 AM
Re: The 283 Rebuild Begins
 
As do I, my good friend.;)

Mac. :chevy:[/quote]

............Group Hug................

jason65 06-25-2009 12:02 PM
Re: The 283 Rebuild Begins
 
You get to be in the middle David.:lol:

4dranch 06-25-2009 12:18 PM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by jason65 (Post 3379316)
You get to be in the middle David.:lol:
:exit:

jason65 06-25-2009 12:29 PM
Re: The 283 Rebuild Begins
 
:whine: No, don't go!:haha:

MacAttack 06-25-2009 12:31 PM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by 4dranch (Post 3379292)
As do I, my good friend.;)

Mac. :chevy:

............Group Hug................
Hug up on this........!

http://www.frontiernet.net/~joe14580...motorcycle.jpg

Mac. :lol:

jason65 06-25-2009 12:37 PM
Re: The 283 Rebuild Begins
 
:haha:

4dranch 06-25-2009 12:39 PM
Re: The 283 Rebuild Begins
 
WTF...........:lol::lol::lol:

:haha:.......You just ain't all there Mac....:haha:

There went my lunch....:puke:

MacAttack 06-25-2009 12:57 PM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by 4dranch (Post 3379390)
:haha:.......You just ain't all there Mac....:haha:
LEGAL DISCLAIMER: When and where did Mac ever claim he was "all there?"


Mac. :lol:

MacAttack 07-02-2009 01:32 PM
Re: The 283 Rebuild Begins
 
2 Attachment(s)
From a few Saturdays ago......

MacAttack 07-02-2009 01:34 PM
Re: The 283 Rebuild Begins
 
2 Attachment(s)
and......

MacAttack 07-02-2009 01:36 PM
Re: The 283 Rebuild Begins
 
2 Attachment(s)
some more....

MacAttack 07-02-2009 01:39 PM
Re: The 283 Rebuild Begins
 
2 Attachment(s)
and then...

MacAttack 07-02-2009 01:41 PM
Re: The 283 Rebuild Begins
 
2 Attachment(s)
and finally.

MacAttack 07-02-2009 01:51 PM
Re: The 283 Rebuild Begins
 
1 Attachment(s)
More 2-Barrel Rochester detail....

jgh64pkup 07-02-2009 01:58 PM
Re: The 283 Rebuild Begins
 
so what happened:confused:

MacAttack 07-02-2009 02:02 PM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by jgh64pkup (Post 3392262)
so what happened:confused:
On the carb? My ex-wife happened.

jgh64pkup 07-02-2009 02:50 PM
Re: The 283 Rebuild Begins
 
what about the rest of the truck
im still :confused:

jason65 07-02-2009 02:57 PM
Re: The 283 Rebuild Begins
 
Don't forget the 00 mag shells. Reach out and touch some one.:devil:

MacAttack 07-02-2009 03:08 PM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by jgh64pkup (Post 3392312)
what about the rest of the truck
im still :confused:
The other work on the truck - far beyond anything I could imagine - is being done by a local transmission re-builder and his associated vendors, due back after the 13th and untold hundreds of dollars.

Is that what you mean? :smoke:

MacAttack 07-02-2009 03:11 PM
Re: The 283 Rebuild Begins
 
Quote:
Originally Posted by jason65 (Post 3392324)
Don't forget the 00 mag shells. Reach out and touch some one.:devil:
True Dat - my Brother. :metal: (when in doubt - make'm go 'BANG-BANG.'

http://www.mossberg.com/images/products/590A1/53690.jpg

4dranch 07-02-2009 03:16 PM
Re: The 283 Rebuild Begins
 
1 Attachment(s)
Quote:
Originally Posted by jason65 (Post 3392324)
Don't forget the 00 mag shells. Reach out and touch some one.:devil:
:lol::lol: That's what I'm talking about....
Quote:
Originally Posted by MacAttack (Post 3392333)
The other work on the truck - far beyond anything I could imagine - is being done by a local transmission re-builder and his associated vendors, due back after the 13th and untold hundreds of dollars.

Is that what you mean? :smoke:
I think jgh64pkup wants the short version of your truck's history...

Don't shoot to kill....Shoot and have some fun.....:lol::lol:


All times are GMT -4. The time now is 08:58 AM.
Page 16 of 24 « First 61112131415 16 1718192021 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com