The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today? Chapter II (https://67-72chevytrucks.com/vboard/showthread.php?t=612422)

197D_C10 02-26-2018 12:11 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by stevenfromtexas (Post 8196616)
hey brother, is that the 506 medium blue? i love your color!!!

Thanks bro. I forget the exact name of it, but its a Lexus color. My son picked it out.

RodnRudy 02-26-2018 08:07 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
I stuck the pistons, torqued the rod caps and installed the cam and timing chain/gear. That cone type ring compressor I got from Summit works slick.

RodnRudy 02-26-2018 08:11 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
Couple more, can't load more than two at a time, pics might be too large?

ZEKE68 02-26-2018 11:47 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
Finished the throttle linkage and some of the fuel line. Plumbed the P/S vacuum line. Installed the fuel pump. Set the radiator and shroud.

Metaldoc 02-27-2018 12:24 AM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Quote:

Originally Posted by RodnRudy (Post 8198319)
Couple more, can't load more than two at a time, pics might be too large?

I just pulled mine apart down to the pistons, they were still good. Looking great.

3757chevy 02-27-2018 03:16 AM

Re: What did you do to your truck today? Chapter II
 
3 Attachment(s)
I hauled a hundred pounds of aluminum cans to the recycler , took up more space than I thought .

hamjet 02-27-2018 07:10 AM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by Metaldoc (Post 8198601)
I just pulled mine apart down to the pistons, they were still good. Looking great.

That looks like a 60s 327 with that road draft tube casting in the block with the oil baffle still in place, been a while since building those. memories....

VWNate1 02-27-2018 10:28 AM

Still 'Hauling The Mail'
 
I LOVE your truck ! .

-Nate

Quote:

Originally Posted by 3757chevy (Post 8198684)
I hauled a hundred pounds of aluminum cans to the recycler , took up more space than I thought .


3757chevy 02-27-2018 01:31 PM

Re: What did you do to your truck today? Chapter II
 
Thanks Nate, I've this one twenty years now it's been good to me.

Metaldoc 02-27-2018 01:31 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by hamjet (Post 8198711)
That looks like a 60s 327 with that road draft tube casting in the block with the oil baffle still in place, been a while since building those. memories....

numbers matching 283 from my 67

Metaldoc 02-27-2018 06:41 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by 3757chevy (Post 8198684)
I hauled a hundred pounds of aluminum cans to the recycler , took up more space than I thought .

Hey man , have got a pic of your step side with the side showing the black ralleys with spinners against the blue paint. I 've been toying on painting mine black from silver. One hundred pounds of empty aluminum beer cans?
Thanks Derek.

Gokart Mozart 02-27-2018 08:19 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
Walked away after nearly stripping a brake fitting.

3757chevy 02-27-2018 09:54 PM

Re: What did you do to your truck today? Chapter II
 
No Metaldoc mostly soda cans and some v8 juice energy drinks and that. I couldn't save beer cans long enough to save up 10 pounds. uck:barf:

3757chevy 02-28-2018 11:06 AM

Re: What did you do to your truck today? Chapter II
 
Some times when I go to the recycler in the summer the smell of all the beer cans is almost unbearable.

3757chevy 02-28-2018 11:47 AM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Only side pic I could find this morning Derek.

HO455 02-28-2018 02:18 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by 3757chevy (Post 8199699)
Some times when I go to the recycler in the summer the smell of all the beer cans is almost unbearable.

That brings back memories. When I was 12 or so the neighbor kid and I got a deal with the local Elks that his mom managed. She would bring the cans home in her truck and we would get to smash them, turn them in and keep the cash. We smashed about hundred pounds a month. Then we take them down to the recycler on our bicycles. We did it for years. It got easier when we got our license's. But never realized the true benefit until years later when mom told me she never could tell if I had been drinking since I had smellled like beer for years. :lol:

3757chevy 02-28-2018 06:17 PM

Re: What did you do to your truck today? Chapter II
 
Stale beer cans are the worst. Pop cans are sticky and summer time swarming with bees, just can't win.

Metaldoc 03-02-2018 01:59 AM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by 3757chevy (Post 8199730)
Only side pic I could find this morning Derek.

Perfect thanks, I like the blacked out look better than the silver.

3757chevy 03-02-2018 02:23 AM

Re: What did you do to your truck today? Chapter II
 
Me too Derek. I had the silver 6 lug with spinners prior to the disc conversion .

Metaldoc 03-03-2018 07:46 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
It's been 30 years ago since I rebuilt a power box and now remember why. What a pain getting all 26 BB's back in the right way. I'm on try #8 now and took a break.

RodnRudy 03-03-2018 08:33 PM

Re: What did you do to your truck today? Chapter II
 
3 Attachment(s)
Back tracking a bit to Fri. I got the heads on and torqued. Also installed the lifters, rocker assemblies and set the valves. First pic using a thread chaser to clean out head bolt holes.

RodnRudy 03-03-2018 08:40 PM

Re: What did you do to your truck today? Chapter II
 
5 Attachment(s)
So today I decided the engine had to be Chevy orange and I proceeded to prep and paint the thing with VHT engine enamel. Painted the water pump cast aluminum also. Stuck the intake on to get a look see and I can tell I'll be shopping for some more classy valve covers.

icewaterdon 03-03-2018 09:06 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Those that live in the northern states can appreciate this. What did I to to my truck today, I drove it. Only 1 burnout.

FRCvette 03-03-2018 10:47 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by icewaterdon (Post 8202485)
Those that live in the northern states can appreciate this. What did I to to my truck today, I drove it. Only 1 burnout.

I understand completely. Drove mine on a 300 mile round trip today.

'69C-10 03-04-2018 12:51 PM

Re: What did you do to your truck today? Chapter II
 
http://i66.photobucket.com/albums/h2...psvye9lnvs.jpg

Started tearing the old bed floor out.

SoCoC10 03-04-2018 01:08 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Took the doors apart to replace the locks. Lubricated the regulator, rollers in the glass channel and used a dry lube on the glass run channels. Cleaned and polished the door trim with 0000 steel wool, repainted the black and installed new woodgrain tape.

69BUCKET 03-04-2018 08:23 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Haven't been able to find any good how to's on making a sending unit for oem tank but doing ls swap....i ordered a 72 unit with a 3/8" out line and 1/4" return...cut and drilled hole to accept oem 5/16" out line from my 69 tank after i took apart the original sending unit...

findog78 03-04-2018 08:36 PM

Re: What did you do to your truck today? Chapter II
 
Looks good.

OregonNed 03-04-2018 09:26 PM

Re: What did you do to your truck today? Chapter II
 
Choke adjusted

Barnfind46 03-04-2018 09:28 PM

Re: What did you do to your truck today? Chapter II
 
I changed out my heater core. Got home Friday from work and my passenger side floor was wet and smelled like antifreeze.

rjs53 03-04-2018 11:06 PM

Re: What did you do to your truck today? Chapter II
 
Shortened the frame today. Now a swb , got the bed almost done and she'll back together till I pull the cab to repair all the rust.

stevenfromtexas 03-04-2018 11:59 PM

Re: What did you do to your truck today? Chapter II
 
sprayed my hood 2 days ago.....prolly not the best thing to spray for your first time EVER painting.

wet sanded today. sprayed the back of the cab and front of the bed this evening. gonna spray everything tomorrow.....
i actually had fun wet sanding the hood....is that weird???

oh, smoked some ribs too

Steeveedee 03-05-2018 01:09 AM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by stevenfromtexas (Post 8203541)
sprayed my hood 2 days ago.....prolly not the best thing to spray for your first time EVER painting.

wet sanded today. sprayed the back of the cab and front of the bed this evening. gonna spray everything tomorrow.....
i actually had fun wet sanding the hood....is that weird???

oh, smoked some ribs too

Are you the same Steve that has a hot rod Buick, posting on V8Buick? I also posted over there as Steeveedee, up until I sold my '68 GS California. If so, small world!

findog78 03-05-2018 01:20 AM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by B Myers (Post 8191791)
Installed a Edelbrock air gap intake and a Holley Sniper kit. Still getting the setup and learn process perfected. [ATTACH]Attachment 1754463[/ATTACH]

How are you liking the Sniper system so far? Did the set up and tune go well?

stevenfromtexas 03-05-2018 10:08 AM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
Quote:

Originally Posted by Steeveedee (Post 8203586)
Are you the same Steve that has a hot rod Buick, posting on V8Buick? I also posted over there as Steeveedee, up until I sold my '68 GS California. If so, small world!

no sir

SlowGreen71 03-05-2018 10:48 AM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by rjs53 (Post 8203505)
Shortened the frame today. Now a swb , got the bed almost done and she'll back together till I pull the cab to repair all the rust.

PICS! Lots of them. I'm about to do this. There's a couple great threads on it already but more always help. I'll be doing this same thing before too long.

JustToxic 03-05-2018 11:11 AM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
Worked out the bugs with making a fixed center seat a folding center seat. Had to take it all back apart and add some grease to certain spots and add a hard back for where your arm goes.

VWNate1 03-05-2018 11:15 AM

The Hard Part
 
@ Steven ;

If I could do paint as nice as your hood looks I'd enjoy it too ! :metal: .

Keep up the good works .

stevenfromtexas 03-05-2018 11:16 PM

Re: The Hard Part
 
Quote:

Originally Posted by VWNate1 (Post 8203759)
@ Steven ;

If I could do paint as nice as your hood looks I'd enjoy it too ! :metal: .

Keep up the good works .


thank you sir....

fortunately the good lord invented grinders for our welder brothers/sisters and wet sanding for our painter/"non"painter brothers and sisters hahaha

VWNate1 03-05-2018 11:30 PM

Re: What did you do to your truck today? Chapter II
 
Yeah well ;

I can't weld either .

I can tune the crap out of old engines and build 'em, do all the repairs etc. but making 'em look sharp isn't my forte' and I hate 'patina' 'cause when I were a laddie it meant : you're a broke ass Country Boy...... :waah: .

:lol: .


All times are GMT -4. The time now is 07:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com