![]() |
Re: What did you do today not on your truck...
I love the small campers. I'm disappointed I missed out, due to not being able to buy right when I saw it, on a newer bugger one. It was a tandem axle with squared lines from the '70s in pretty good shape. It had been stored under a carport all it's life. It was probably as short as you would find in a tandem. Not all dented up, the interior was ok but I would have redone to suit me. Would have been perfect behind my '72 K2500. Oh well. I'll build one if I don't end up finding one to buy that I like
I have never smoked, and I have never given anyone a hard time about their smoking either. I will say I feel I couldn't be any healthier at 67 years of age and one of the many things I credit for that is not smoking. Heredity plays a large role in many health issues. What I know I have in mine is heart/artery issues, diabetes, and aneurisms. My dad smoked for many years, but did quit many years before his passing. He passed due to the diabetes, he had an abdominal aneurism repaired, very late in life, he had two heart attacks back when he was smoking (in his 40s) and had his corroded arteries cleared, also late in life. He passed away at 79, about 11 years older than I am now. My oldest sister smoked many years, up to a point. She was always very health conscious, except she smoked. She died from a brain aneurism bursting at 2 weeks past her 40th birthday. My grandmother (Dad's mom) also passed due to a brain aneurism, but at a fairly elderly age. She also smoked. I could be next, but I believe my chances are better in all this risks due to living with the belief "health is our greatest wealth", and adhering to that with my lifestyle. I hope I didn't just jynx myself! :lol: |
Re: What did you do today not on your truck...
Quote:
|
Re: What did you do today not on your truck...
Quote:
|
Re: What did you do today not on your truck...
Been restoring a '67 Camaro for a few years now. Full, AMD 1 piece trunk floor, full right, NOS, quarter panel and tail panel, Left AMD quarter skin. Closing in on getting the whole body in primer. This is the trunk seal gutter ready for epoxy sealer/primer along with the extension panel and interior trim panels for tomorrow's session.
https://hosting.photobucket.com/imag...s/DSC00119.JPG https://hosting.photobucket.com/imag...s/DSC00120.JPG https://hosting.photobucket.com/imag...s/DSC00121.JPG |
Re: What did you do today not on your truck...
Good job. Those old camaros get in your blood. Parts are available and relatively reasonable.
|
Re: What did you do today not on your truck...
Quote:
:lol: |
Re: What did you do today not on your truck...
Nice work on the Camaro!
Will be sweet when you’re done |
Re: What did you do today not on your truck...
1 Attachment(s)
Got the brakes are making noise from the misses . Left rear caliper locked solid hardly anything left of the inner pad metal on metal
|
Re: What did you do today not on your truck...
2 Attachment(s)
Did some work on the AMX . This has been a 10 year project just seems more important things come up . Next will be installing the Wilwood disc brake kit .
|
Re: What did you do today not on your truck...
Quote:
I had an unusual thing happen to me today. I wrote a novel years ago. I was going to publish it. But my computer just ate it. I couldn't find it anywhere. I wrote 4 sequels but they just didn't measure up. It was my best work. 2 years I have looked for this thing. Nothing. It was gone. :smoke: I was looking for an old photograph today completely unrelated and there it was. I about fell out of my chair. I will try and publish it now. My brother was going to help me. He had already published five books. (available on Amazon) but he unfortunately passed away last year. So, I'm on my own. What the F... I already wrote it. I can do this without my big brother. I sure miss him. |
Re: What did you do today not on your truck...
No big thing really but I put a window air conditioner in the shop and cleaned up a bit. That should make it a bit more tolerable out there this summer. Now it's time to paint the outside of the shop, before it gets hot again.
|
Re: What did you do today not on your truck...
Wife’s Acura developed an annoying rattle somewhere under the hood and I’ve been chasing they sucker for months. Finally found it today. Small aluminum shield in front of the frame crossmember. Held on by M6x1.0 bolts on both ends but one of those stupid plastic push fasteners in the middle. You could see where that middle fastener had gotten loose and the center was vibrating. Put it back with a better fastener and a piece of plastic between the two metal pieces to insulate it a bit.
|
Re: What did you do today not on your truck...
I talked to my mom yesterday and learned she has a pinched nerve in her back that is giving her a hard time. It hurts worst laying down and she's having a hard time sleeping. BTW, she'll be 93 next month, lives alone. so, no gathering at mom's for Easter. In fact, she didn't want company in case she needed to go get some sleep. She's taking a medicine that makes her groggy and she just wasn't up to socializing. But the friend who is a retired nurse that helps her with such matters was away for Easter.
I went to the store for food, bought a ham for myself and my son, as well as other things to throw together for an Easter dinner. I got the idea to go ahead and grill the ham yesterday evening ahead of time and fix up portions of the rest of today's meal for her. I left early this morning to run it up to her anyway. If she was asleep I'd just leave it for her and head back. well, she got better sleep last night, was up, and I got to visit with her a few hours before heading back to fix the meal for us. Made the most of the situation and we'll have pit ham for a while, then some bean soup!! |
Re: What did you do today not on your truck...
2 Attachment(s)
Replaced the rear brake pads on my daughters CRV.
|
Re: What did you do today not on your truck...
Supposed to be rotisserie grilled boneless leg of lamb, but the grill we bought doesn't have a provision for the spit. I grilled it, but got busy on the internet and when I went out to check on it, the temp was close to 600º. :uhmk: Got that straightened out with a bit more attention, but lost probably half a pound of meat to char. Not happy. The rest tasted good, though.
Also cleaned out and lubed the track on the sliding glass door to the back yard. All that rain and dirt splashing around clogged the channel. |
Re: What did you do today not on your truck...
Today, I finalized the deal to SELL my 1990 19K mile Sport today….that’s what I did to my truck today.
https://i.ibb.co/ydTtSMn/1-B2-BBC2-A...-DBE6-A2-C.jpg I don’t drive it much and I’m scared to get it out & get it dirty because I’m afraid of scratching the darn black paint while I’m washing it! I’ve also had one stolen and I’m kinda paranoid about driving it and leaving it parked outside like at a movie theater, WalMart, or at work. I really enjoy the truck, but it worries me at the same time. The other guy made me a really nice offer and I accepted it today. The truck’s new home will be in Calgary, Alberta, Canada. My dad is 82 and owns a 2003 Silverado with 50K miles that he’s gonna make a gift of to me. So I’ll still be in the Chevy family. |
Re: What did you do today not on your truck...
Quote:
Quote:
|
Re: What did you do today not on your truck...
Quote:
I don't like the looks of Dad's '03 Silverado that he's agreed to give to me. I was never crazy about the "Cat Eye" years. Getting it for the right price, though, thanks to Dad. He always took good care of me and still is. |
Re: What did you do today not on your truck...
1 Attachment(s)
I am one who is disappointed GMC didn't go with the cat eyes, since I prefer GMCs. I hated them at first, but grew to like that chiseled look, same as Cadillac has still. I actually prefer nothing newer than GMT400s. 21st century trucks/vehicles don't hold my interest as anything but newer transportation. That's how I felt about the GMT400s, even when I factory ordered my '92. It was just a work tool, but since it cost so much money I wanted it built my way. As trucks changed more and more from that platform I see them as the last classic trucks. It began with the extended cab short bed GMT400s that trucks became more built for people who don't actually need trucks to where they are now, took over the new car market as the family vehicle. I only like traditional cabs
|
Re: What did you do today not on your truck...
Quote:
|
Re: What did you do today not on your truck...
I did nothing on my truck today. I tried. I started it and the ole 396 fired right up. :)
Then it ran out of gas. :( No problem. I've got a 2 gallon gas can that's pretty much full in the garage. Problem. It has a locking gas cap and the key doesn't work. :rolleyes: So I go on Youtube to see how to get this dang thing open. They show guys using a screwdriver and it comes right off. I tried that...Didn't work. It's still on there. (sigh). This thing isn't giving up easy. |
Re: What did you do today not on your truck...
I gave up on locking gas caps and lug nuts. Nothing worse than self-inflicted aggravation. It sure sucks locking yourself out of your own gas tank.
|
Re: What did you do today not on your truck...
Quote:
I have never had removed them on a running vehicle. A non-running Junker you have more choices. :lol: Try U tube this method. http://youtu.be/8AuiZGcHEo8?t=9 |
Re: What did you do today not on your truck...
I finished loading up the trailer with old wood from my shop makeover. Had a guy stop by some weeks ago asking for some of the fir siding I was replacing and I said get all you want. He drives by here 4 times a day at least and some how forgot about it. So I swear, less than 1 hour after I finished loading up my trailer he remembered and stopped in again. I told him if he still wanted it to get it cause it won't be here come Saturday. He found a son to help him unload and sort through the sheets and reload the rest. Super! Then I serviced all the lawn care equipment. Weeds are getting tall. It's time. ;)
|
Re: What did you do today not on your truck...
2 Attachment(s)
Well, I havent done it yet, but on today's agenda is designing a log moving device. Sorta like a log arch. Anybody here with any experience using one or building one? Nobody wants to skid out two trees so its up to me or they will rot where they sit. I have a couple of designs in mind to build sorta like.
|
All times are GMT -4. The time now is 01:43 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com