The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today? Chapter II (https://67-72chevytrucks.com/vboard/showthread.php?t=612422)

stevenfromtexas 03-22-2018 09:29 PM

Re: What did you do to your truck today? Chapter II
 
put my new weather strip on the drivers side. looks like door adjustment is on my list for tomorrow.

cornerstone 03-22-2018 10:13 PM

Re: What did you do to your truck today? Chapter II
 
Pulled the cab back off in order to get some body work done easier, and to pull the TCM in order to send it off to be programmed.

Cbo68 03-22-2018 10:27 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Put the grill molding on. Rainy day up here in the pnw and sweet 16 is on. Back inside !

Boog 03-22-2018 11:07 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
turn

Mts67C10K20 03-23-2018 01:01 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Installed both hubs, calipers and shocks
And aligned the steering
Almost there
Ready to bleed the steering and brakes

66clow 03-23-2018 01:24 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
About to finally have an emergency brake

tutone 03-23-2018 07:21 PM

Re: What did you do to your truck today? Chapter II
 
I put in one of those cheap Chinese cardboard glove boxes that about half way fit. What a pain in the rear. Anyway after trimming and fighting it, I have a functional glove box. I need to update my build thread with some photos of the new parts.

stevenfromtexas 03-23-2018 10:31 PM

Re: What did you do to your truck today? Chapter II
 
put my locking and window mechanisms in today. put the window channel felt in too. waiting on my vent window rubber. gonna have my wife help me install my back and front glass next week......gettin' closer yeeeeyaaaa

SoCoC10 03-24-2018 01:33 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
New door weatherstripping, dash pad, seat upholstery and carpet kit.

wpavlis 03-24-2018 03:28 PM

Re: What did you do to your truck today? Chapter II
 
Spent some quality time with a scraper and The saginaw I pulled out last weekend. Must have scraped off 3 pounds of a gross mixture of oil, grease and dirt. Tonight or tomorrow I will start disassembling it on my work bench.

OregonNed 03-24-2018 05:05 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by RodnRudy (Post 8218654)
I bent up a new fuel line to better clear my new valve covers.

Those are sweet! Nice choice

slaughter442 03-24-2018 05:57 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Off with the old step on with old sport love these trucks:metal::chevy:

yuccales 03-24-2018 10:40 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by SoCoC10 (Post 8220383)
New door weatherstripping, dash pad, seat upholstery and carpet kit.

Very nice! I spent only 10 mins on the '70 today, new highbeam switch. That's it.

StruttinSoul 03-25-2018 05:53 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Put buddy buckets and 3 point seatbelts in the truck today, amazing how different the truck looks now

rjs53 03-25-2018 06:51 PM

Re: What did you do to your truck today? Chapter II
 
I installed my new gas tank, pulled the seat and floor mat out and started cutting rust out of the floor and rockers. I definitely made more work than I did.

macdaddy70 03-25-2018 07:14 PM

Re: What did you do to your truck today? Chapter II
 
I got mine back from the body shop. New rockers, cab corners, floor patches. Then I drove it like I stole it.
He has had it for almost a month.

kilrcady 03-25-2018 07:54 PM

Re: What did you do to your truck today? Chapter II
 
nothing,I did nothing.hmmm I hate the snow

stevenfromtexas 03-25-2018 09:58 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by StruttinSoul (Post 8221500)
Put buddy buckets and 3 point seatbelts in the truck today, amazing how different the truck looks now

dang!! hey there brother from WAYYYY south of you

where/who did your seats????. I am wanting the same style!!!

stevenfromtexas 03-25-2018 10:06 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by stevenfromtexas (Post 8219180)
put my new weather strip on the drivers side. looks like door adjustment is on my list for tomorrow.

....sooooo the weather strip "adjusted" themselves. I put them on and when I got home the next morning the doors lined up great!!!. Well.....great enough for rookie/first build/non show standards/daily driver/i dare anybody to say anything standards!! haha

stevenfromtexas 03-26-2018 10:09 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
My sweet little wife helped me put my hood back on after I painted it again this morning.

need to do a little adjusting but hopefully it's on for the last time.

installed a new drivers/upper door hinge too.

66clow 03-27-2018 11:12 PM

Re: What did you do to your truck today? Chapter II
 
4 Attachment(s)
Installed new springs for the rear brakes. Also installed the e-brake cables. Are theses routed correctly and my cable is too long. If I cut it what should I block the end off with?

Mts67C10K20 03-28-2018 04:28 PM

Re: What did you do to your truck today? Chapter II
 
Is that possible a long bed cable on a short bed
Where the single cable joins the double is there any more adjustment?

Metaldoc 03-28-2018 05:48 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
It's all painted again for the second time.

66clow 03-28-2018 05:51 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by Mts67C10K20 (Post 8224295)
Is that possible a long bed cable on a short bed
Where the single cable joins the double is there any more adjustment?

Part code seemed to be sb. But I will make sure again everything is in place. But think it may be a LB cable.

RodnRudy 03-28-2018 05:54 PM

Re: What did you do to your truck today? Chapter II
 
3 Attachment(s)
Fired the engine for the first time after the rebuild yesterday and today finished everything up by putting the new valve covers and air cleaner on. Now on to pass. fender cup repair and re installing the fenders. Cruisin' season's coming up and I'm way behind.

RodnRudy 03-28-2018 06:49 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by 66clow (Post 8223753)
Installed new springs for the rear brakes. Also installed the e-brake cables. Are theses routed correctly and my cable is too long. If I cut it what should I block the end off with?

In looking at your pics the cable should be running through the outer hole on the cross member, the one with the plastic gromit in it , then up to the curled wire hanger in the frame and then to the back down the other side the same ending at the other bracket that connects the two rear cables. That routing may shorten the cable enough. Hope this helps.

Metaldoc 03-28-2018 08:47 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Quote:

Originally Posted by 66clow (Post 8223753)
Installed new springs for the rear brakes. Also installed the e-brake cables. Are theses routed correctly and my cable is too long. If I cut it what should I block the end off with?

This is my long bed e brakes

StruttinSoul 03-29-2018 12:24 AM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Quote:

Originally Posted by stevenfromtexas (Post 8221738)
dang!! hey there brother from WAYYYY south of you

where/who did your seats????. I am wanting the same style!!!

The seat covers are from Ricks Custom Upholstery


On a separate note, today I installed a jackrabbit original tunneau cover - love the way it looks!

NoStopN 03-30-2018 11:05 PM

Re: What did you do to your truck today? Chapter II
 
I ordered some LED headlights on Monday & they arrived today. I was able to get one of them installed. Rusty screws held the other 3 up. Lol.

https://c1.staticflickr.com/1/816/39...3573523b_b.jpg

https://c1.staticflickr.com/1/868/41...476d1c72_b.jpg

stevenfromtexas 03-30-2018 11:12 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
front grill/bumper.....rear and front today.

71cheyennesuperlongb 03-30-2018 11:21 PM

Re: What did you do to your truck today? Chapter II
 
Washed windsheild,wheels,tires,armor alled tires. Going to LEATHAL PERFORMANCE and DYNO open house in Jefferson City,TN.Looking for highest rear wheel HP! Probally have to be over 600RWHP to win.Speciallization in LS motors.Might get to see a Mustang blow the hell up!

Metaldoc 03-31-2018 12:28 AM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Ceramic coated my exhaust manifolds and pulled all the lettering stickers off. Looking like it should for shiny side down truck.

69BUCKET 03-31-2018 01:57 AM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Radiator, shroud, fan, power steering lines, trans. Lines, torque converter bolts...

RodnRudy 03-31-2018 08:25 PM

Re: What did you do to your truck today? Chapter II
 
4 Attachment(s)
Decided to tackle the rusty fender up today. I tried a different way to make the repop cup fit by lining up the wheel opening side then using a spot weld cutter I removed the piece on the rear of the cup and made relief cuts to "stretch" the front of the cup. More pics to follow

RodnRudy 03-31-2018 08:30 PM

Re: What did you do to your truck today? Chapter II
 
4 Attachment(s)
I had to make one relief cut on the front of the cup to move it over and add a small piece of filler to the gap. Every thing lined up and time to start tack welding.

RodnRudy 03-31-2018 08:39 PM

Re: What did you do to your truck today? Chapter II
 
4 Attachment(s)
By using this method I eliminated weld seams where they would show. I replaced the rear piece previously removed and finished up by grinding the welds, slinging on some filler, blocking and shooting primer. Tomorrow I'll wet sand the primer and rattle can some color to finish up the repair.

1968aj 03-31-2018 11:05 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
today I installed new carpet , new retrosound laguna radio,and my $20 swap meet seat. also put a set of undercover 2 speakers. retrosound doesn't tell you assembly is required and instructions are not model specific. after many adjustments I finally got it in and I am pleased with the sound. I removed my factory bucket seats for my other project.

KQQL IT 04-01-2018 12:11 AM

Re: What did you do to your truck today? Chapter II
 
Drove ole reliable to get parts for my 99 that ate a fuel pump.

66clow 04-01-2018 06:48 AM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by RodnRudy (Post 8226913)
By using this method I eliminated weld seams where they would show. I replaced the rear piece previously removed and finished up by grinding the welds, slinging on some filler, blocking and shooting primer. Tomorrow I'll wet sand the primer and rattle can some color to finish up the repair.

Beautiful work and thanks for the tutorial!

stevenfromtexas 04-01-2018 09:07 AM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
got a few things in yesterday. side mirrors are on and the tricky fender emblems
:waah:

disregard the oak pollen its everywhere right now


All times are GMT -4. The time now is 07:23 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com