![]() |
Re: Project Vitamin C-10
3 Attachment(s)
Quote:
With the help of rbar he pointed me in the direction of these pics. |
Re: Project Vitamin C-10
1 Attachment(s)
Drove it to work today for a 16 mile trip. It did pretty good. The temp gauge was between 3/4 and 7/8 of running hot. I got to work and the used a lazer temp gun and the hottest spot I found was 220 most spots were around 200. The upper rad hose was 190 i think. I'm thinking of cutting some reliefs in the fan shroud so when it's moving down the road more air is able to move thru the rad. I've heard that when an electric fan is on going down the road it actualy inhibits cooling.
It was blowing a little antifreeze out, but not much. It never boiled over. I got the hood on and tried a little too lined it up. The hinges were really stiff from sand blasting, but with some PB Blaster they freed up a bunch. It's still sticking up in the back and trying to get it down. I don't have a latch in it right now. The latch might help. I'm wondering if the cowl seal is keeping it up. It's spongy in the back. If I push the hood down in the back and let go it comes back up. I used my GPS and it is reading 10 MPH faster. |
Re: Project Vitamin C-10
Looks and sounds good Alan...
Posted via Mobile Device |
Re: Project Vitamin C-10
Coming together nice. Love the sound
Posted via Mobile Device |
Re: Project Vitamin C-10
4 Attachment(s)
Quote:
Quote:
I spent 2 hours measuring 2 times and drilling once in the right door and fender. Then touched upthe holes and installed the fender trim. Can't install the door trim until I paint the silver. Installed the hood latch and got it opening and closing. The back of the hood is still up some. I taped down the cowl seal and it helped some. |
Re: Project Vitamin C-10
1 Attachment(s)
alan, are you going to have to pull the bed off to paint the silver? gm painted the stripe pretty far in on the back of the cab..
|
Re: Project Vitamin C-10
1 Attachment(s)
hood looks good, are you going to paint the inside of the vent and the vertical bar satin black like the factory did? IMO that is the best look on a gmc hood..
|
Re: Project Vitamin C-10
Looks killer Alan!
|
Re: Project Vitamin C-10
Quote:
Quote:
Quote:
|
Re: Project Vitamin C-10
Congratulations Alan,
The truck looks amazing! Sorry if you've already addressed this somewhere in your build thread, but I've found out that you need either a nos or properly calibrated temperature sending unit that matches your older gauges to get them to read correctly. I incorrectly thought that my truck was overheating last summer with the a/c on, but it turns out that the sending unit from Napa doesn't have the correct calibration for older vehicles. As soon as the vehicle gets to operating temperature, the gauge would spike to hot. I'm not sure how this all works with your Impala gauges, but I figured I'd let you know what i learned. I purchased a new sending unit from Lectric Limited and it seems to work great now. |
Re: Project Vitamin C-10
Quote:
Getting a voltage regulator to accomodate this is more than I can wrap my head around, which is why I am just going to to with all new guages and set the truck up for 12v all around. |
Re: Project Vitamin C-10
also on a new motor it is going to run hot because everything is tight. my truck ran about 200 for a good while untill things got broke in. now stays about 190
|
Re: Project Vitamin C-10
Dude that thing is sweet, you did a very good job on it! :metal:
|
Re: Project Vitamin C-10
2 Attachment(s)
Quote:
Quote:
Quote:
Quote:
Today I was able to drill the other side and it only took an hour since I had the lay out figured out. So now I'm ready to paint the silver. Had a little issue with the finish on the mouldings. Discussion link i snapped the turn signals in, but not wired. Took it outside for a few more shots. |
Re: Project Vitamin C-10
The trim is really going to tie everything together. Great job.:metal:
|
Re: Project Vitamin C-10
Sweeeeet. :metal::metal::metal:
|
Re: Project Vitamin C-10
Wow, that really looks great.
Posted via Mobile Device |
Re: Project Vitamin C-10
:agree:
|
Re: Project Vitamin C-10
man am i ever jealous, that is nice, when you get the silver and the trim on it i would take a vacation, maybe the rod run in pigeon forge this weekend and drive it with a great big grin on my face. oh yeah if you cant get anyone to go with you stop by and get me i am on the way:lol:
|
Re: Project Vitamin C-10
Your truck looks awesome! The trim is definitely going to tie it all together and look great!
|
Re: Project Vitamin C-10
4 Attachment(s)
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Got the silver done today. Mar-K also called me and said they hand picked some mouldings and sent them out today. |
Re: Project Vitamin C-10
looks awesome, Alan...i knew that would break up the orange nicely...now when you get those side trim pieces installed, you'll be set!
|
Re: Project Vitamin C-10
Alan, Your truck looks GREAT!! I love the stance of it. I know you probably covered it in your thread somewhere already but what did you do to the suspension to get that stance? I put 4 inch drop springs in the back of mine and ordered 3 inch drop springs for the front.
|
Re: Project Vitamin C-10
Totally cool & sweet ride
Posted via Mobile Device |
Re: Project Vitamin C-10
I just bought a 60 swb stepside and got on this site for some ideas. I just spent the past 4 nites reading every post on your thread. You made an absolutely breathtaking truck. I can't wait to get cutting and building my truck. Thanks for the inspiration.
|
All times are GMT -4. The time now is 08:08 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com