![]() |
Re: What did you do to your truck today?
Getting stuff lined up for water heated manifold plate from Stovebolt. Takes a little plumbing....winter is supposed to arrive Sunday afternoon, so I better hurry!
|
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
Quote:
FYI you can buy Duplicolor brand bedliner material by the gallon then roll it on. If you want more texture you can add sand to it. We used it on trailer floors and it worked great. Lots less expensive than paying for rhino liner etc.. |
Re: What did you do to your truck today?
3 Attachment(s)
Finished lowering the 65 yesterday. The rear shocks that came in the kit were too small so I put the originals back on for now. Looks great and the ride isn't bad either.
|
Re: What did you do to your truck today?
Too nasty to do much.
I did go upstairs in the shop and organize parts and inspect to get an idea where I stand. Really not all that bad. One fender needs a patch, both door bottoms and both doors have about 6 mirror screw holes. The grill support just needs stripping. Looks like 90% of the work will take place on the cab and the hood. Steven |
Re: What did you do to your truck today?
Installed new heater blower motor, had to use a mirror to see the holes.
I did not remove the heater box so lining up the blower mounting holes with the Bo was a bit tricky. Took about 20 min. Posted via Mobile Device |
Re: What did you do to your truck today?
All the suspension parts are painted!
Will begin assembly after a couple days of cure time. Pics later today... Steven |
Re: What did you do to your truck today?
1 Attachment(s)
I bought a Gearhead 21 Circut 18 fuse universal wiring harness, wires are hot stamped every 6" and are GM color coded. I haven't started wiring my truck with it yet but it looks like a pretty good piece for the money.
Now I can add my power windows, door locks, electric cooling fan, electric fuel pump etc. and have lots of room left over to add even more accesories. It will sure beat the 6 fuse factory fuse block. I'm also looking into adding an ignition switch out of a 1962 Pontiac. That way I'll have an acc. switch position and I've always liked that light up ring that surrounded the old Pontiac ignition switches. |
Re: What did you do to your truck today?
spent the afternoon rippin out the rotted wood
|
Re: What did you do to your truck today?
Here's the pic of the last of the suspension parts:
http://i391.photobucket.com/albums/o...87B930FFEF.jpg http://i391.photobucket.com/albums/o...87B6EC1DE5.jpg http://i391.photobucket.com/albums/o...87B12EAC1B.jpg http://i391.photobucket.com/albums/o...87B43F4711.jpg I'm really happy with the way they turned out. Can't wait to assemble the chassis again. Steven |
Re: What did you do to your truck today?
After 10 years, my drive shaft is finally in ..........:lol:
|
Re: What did you do to your truck today?
Cleaned the engine 3 times with purple clean, a scrub brush and a pressure washer. That was the nastiest engine I have ever seen!
Also used my autozone card to get a free harmonic balancer puller and got it off. Finally, I wire wheeled the engine to get it ready for deburring, a good wipedown with brake cleaner and then paint. I want to set the engine and trans before I wrap up the frame in tarps and start on the body. Steven |
Re: What did you do to your truck today?
Finally got the wiring figured out and every needing power has it. Just have to bleed and adjust brakes and should be insured and registered in 2 weeks. Been waiting for that so I can start driving it and start the next project, a 46 Plymouth. It will be reborn with a SBC power plant.
|
Re: What did you do to your truck today?
Filled my antifreeze up after new intake gaskets and ran it for a few to check things out...
Posted via Mobile Device |
Re: What did you do to your truck today?
2 Attachment(s)
Spent the weekend fitting and installing the wood and tubs... So close!!
|
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
5 Attachment(s)
Finished up my AC/heater hoses for the Vintage Air.
|
Re: What did you do to your truck today?
Beautiful work! That looks really nice.
|
Re: What did you do to your truck today?
1 Attachment(s)
For Kevin... "65 Custom" 67 Cadillac "Pinecrest Green"
Cheers! |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
Quote:
Thanks! Steven |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
I have made some serious progress on my center console/shifter setup. I hope to have it finished this weekend and will add pics to my build thread. Should be kinda cool.
|
Re: What did you do to your truck today?
Might have made a deal for tax time to pickup a 65 swb ss with no engine but very little rot for $750.
I will be using the doors and wheels on my truck and selling the rest. That's the plan but, knowing me, it'll turn into another project. Steven |
Re: What did you do to your truck today?
Tore everything out of the cab to wire wheel the corners and get a better look at the rust damage... Exciting...
|
Re: What did you do to your truck today?
Quote:
Posted via Mobile Device |
Re: What did you do to your truck today?
I Installed my brake booster set up today.
http://i88.photobucket.com/albums/k1...1/DSCN2749.jpg http://i88.photobucket.com/albums/k1...1/DSCN2752.jpg |
Re: What did you do to your truck today?
Very nice!
Steven |
Re: What did you do to your truck today?
1 Attachment(s)
Rattlecanned the truck this weekend and dropped the front end . Not sure about the color scheme , but it is a turqousie color .... even though it looks like a crappy blue in the pic. :metal::metal:
|
Re: What did you do to your truck today?
Worked on a rusty door. Almost ordered the AC unit but chickened out. Maybe next month....
|
Re: What did you do to your truck today?
1 Attachment(s)
Getting ready for step notch.:ito:
Posted via Mobile Device |
Re: What did you do to your truck today?
Put rear axle seals in last night. Gonna throw a thermostat in it today. Been doing little projects almost everyday and it's almost ready for daily driver status. For as long as the truck had sat it really hasn't needed that much. Gotta love old stuff that was built to last!
Posted via Mobile Device |
Re: What did you do to your truck today?
Bought new bolts and put in the cross member! It feels awesome actually assembling.
Tomorrow will put on the control arms, spring, spindles and anything else I can squeeze in. Steven |
Re: What did you do to your truck today?
NOTE--it's interesting to see just how many VW's sneak into photos of the old trucks on this site...
Posted via Mobile Device |
Re: What did you do to your truck today?
1 Attachment(s)
haha yea... now i cant Not look at the VW's...
Played with the drum brakes today while I wait for enough money to change to disk. Brake cylinders look good, I think I'll just slap them back in instead of installing the new ones I got.....:lol: |
Re: What did you do to your truck today?
quick phone snap shot of the crossmember.
http://i391.photobucket.com/albums/o...CC96EF121C.jpg Steven |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
|
Re: What did you do to your truck today?
My plan was for my son and I to go over to Grandpa's shop and switch out our steering column, modify the fan shroud to fit, and tap a couple of broken screws in the door panels. That all changed when I got the last minute call to work Saturday....oh well
|
Re: What did you do to your truck today?
Thanks Craigerrrr!
Steven |
All times are GMT -4. The time now is 11:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com