Re: Project: Bad Bagged '68.5
 

Both, the frame sits 1" off the ground and I am 6'1"

Thanks everybody for the positive feedback!

josh

Re: Project: Bad Bagged '68.5
 

Hey J...you had asked for info on cutting the door frame. I asked and it was actually done by glock and here's the thread with some pictures. As you can see I was mistaken on where the cut was made.

http://67-72chevytrucks.com/vboard/s...d.php?t=413073

Re: Project: Bad Bagged '68.5
 

Thank you SO much! I love this board!

Re: Project: Bad Bagged '68.5
 

Nice job..

Re: Project: Bad Bagged '68.5
 

Truck is looking good! Great attention to detail! Looks like you may need to drop that seat down a foot or two to be comfortable in there! Keep up the great work !

Re: Project: Bad Bagged '68.5
 

Subscribed! love that build!

Re: Project: Bad Bagged '68.5
 

nice work.

Re: Project: Bad Bagged '68.5
 

Just read the whole thread - at every point of this build your attention to detail and craftsmanship is not just noticeable, but outstanding. I've read a few "I'm gonna steal that idea!"....I think I'm gonna steal all your ideas!

Re: Project: Bad Bagged '68.5
 

Any updates? Your frame turned out awesome!

Re: Project: Bad Bagged '68.5
 

Not really. I'm just fighting a door alignment battle right now. :lol:

Re: Project: Bad Bagged '68.5
 

I take it the door is winning:lol:

Re: Project: Bad Bagged '68.5
 

very awesome build.. Just when I thought I did a really clean job with my airline and brake line I saw this thread and my mind is blown! so so so awesome.. and the door trimming tip is outstanding. my driver door is so tight in the upper corner it makes me sick to think i ignored it, now ive got chipped paint there ha ha. maybe time for a little revision and spotting in my upper door frames!

Re: Project: Bad Bagged '68.5
 

sweet build bro, i like your rear set up, is the truck layin frame in the rear with that set up? is this your 4 link your running http://www.*****************/4-link-k...gulated-4-link ... also where did u get get the 4 link mounts on your axle? keep up the good work man lookin sweet!!!

Re: Project: Bad Bagged '68.5
 

Yup, got the 4 link from Suicide Doors. The axle tabs I designed. I made an extra set if you are interested. They are CNC cut from .25" steel.

Re: Project: Bad Bagged '68.5
 

Dude, I LOVE your truck. I posted in your thread too...we have VERY similar tastes. As of right now, the plan is for cream steelies with spyder caps, Cream roof, green body(more of a stock color like forum member tcb-1 which is 504 Yellow Green Poly) and lower trim. I can't wait.

The passenger door is finished. I will post pics later today.

Re: Project: Bad Bagged '68.5
 

Got the drivers side door finished. The curved part of the window frame was just about hitting the cab, so some reconstructive surgery happened. I had two pairs of doors; the doors that were original to the cab which were rusted to hell on the bottom, and a second pair I bought that were rust free. So what I did was took the window frame out of the original doors (kind of as practice to make sure I could get the window frame out) and put the window frame in the good shells. I also cut the frame at the upper left hand corner to fix the door gap in that area. Then I positioned the window frame in the door shell where I wanted it and spot welded it back in. Here is a before and after:

BEFORE
http://farm5.static.flickr.com/4146/...16d75a45_z.jpg
AFTER
http://farm5.static.flickr.com/4131/...03892eac_z.jpg

This is what it looks like after you get it out
http://farm5.static.flickr.com/4087/...c1542d5f_z.jpg

Here is the frame out and where I cut and welded it
http://farm5.static.flickr.com/4132/...088bab3b_z.jpg
http://farm5.static.flickr.com/4148/...1200d44a_z.jpg

Here is how the other door gaps came out. Not too shabby for a first timer! Remember, I replaced the entire floor, both lower pillars, cab corner, and the rocker. I'm pretty happy with the results.
http://farm5.static.flickr.com/4089/...bb617d5e_z.jpg

The right end of the rocker was sliced and new metal put in to align with the door.
http://farm5.static.flickr.com/4108/...fe591baa_z.jpg

You've probably seen this before, but here is a way to be able to hold a small filler piece of meta,l that you cant get behind, for welding.
http://farm5.static.flickr.com/4133/...5f0324d9_z.jpg

Last one of the day: Here is how to bolt a door on all by yourself. I had a piece of left over steel that was in the shape of a "c". One lip was small enough to tuck under the door so I could bolt a strap to it and lift the door with a hoist.
http://farm5.static.flickr.com/4111/...9392922a_b.jpg

Re: Project: Bad Bagged '68.5
 

That's a cool trick...maybe a picture of what the steel piece looks like. It looks like it really helped to get them on with good gaps.

Re: Project: Bad Bagged '68.5
 

Very nice work! Those gaps look great!

Re: Project: Bad Bagged '68.5
 

Yes, you should be very proud, nice work. The gaps look great.

Re: Project: Bad Bagged '68.5
 

I know this has already been brought up, but .............the gaps look great lol ...awesome build!
Posted via Mobile Device

Re: Project: Bad Bagged '68.5
 

Dude that turned out great! Your whole truck is looking awesome!
Posted via Mobile Device

Re: Project: Bad Bagged '68.5
 

Any updates?

Re: Project: Bad Bagged '68.5
 

ditto!
:metal:

Re: Project: Bad Bagged '68.5
 

Outstanding job man, can't wait to see the final product.

Re: Project: Bad Bagged '68.5
 

Lookin good
Posted via Mobile Device