Re: my 65 fleetside build
 

couldn't put it much better myself :metal:

Re: my 65 fleetside build
 

I'll take it
Posted via Mobile Device

Re: my 65 fleetside build
 

I'd drive it.

Re: my 65 fleetside build
 

Wow Flips, that is saawweeeeet! What a fantastic job so far. Great inspiration, keep it up! :metal:
Posted via Mobile Device

Re: my 65 fleetside build
 

thanks lolifeand thank you as well likaroc

i guess i better hang on to it my end up divorced:lol:

thanks dustin
thanks 1968vetl-71, have you been to the pull a part lately?

well a few updates, found a hydroboost system off a astro van, and a bucket seat and console from a 92 chevy truck and since i already have a 60-40 i can either run buckets or a bench. stripped the frame and its ready for blasting, also got my rear disc brake on today as well and i am beat, heres a few pics of my progress

Re: my 65 fleetside build
 

Wow Flips, you are really rocking that red !!
That looks soooo freekin nice.

Re: my 65 fleetside build
 

Funny you asked. This is what I just went and found this morning. This 61 was loaded! Some one had already grabbed the deluxe wheel but left the center horn piece, and has deluxe heater/controls. It also had these really neat vent covers and were operated by the chrome pull knobs located on each side under the dash. I never seen that before or really paid close attention to it. All the ones I have/had are just the pull type right on the vent. It (HAD) an absolute cherry BBW panel, I almost felt guilty cutting it up. :lol: I wonder where the trim went?

Re: my 65 fleetside build
 

forgot to ask... where did you get the rear disc brackets from? Looks killer!!

Re: my 65 fleetside build
 

thanks McMurphy, checked your floor patch today, looked good to me:metal:
i think you have to be the luckiest man on earth when it comes to finding parts, never seen those vent covers either, maybe some rare factory option?
the brakes are from a company called blackbird direct bolt on, no issues what-so-ever. i did decide not to put my e- brake back on, i never was to keen on the under dash set-up otr the crossmember rig. i did get the rear end finished all but the brake lins i need to purchase a good flaring tool mine is junk. heres a couple pics of the finished rear end

Re: my 65 fleetside build
 

That rear brake set-up looks real nice. I been messing with calipers today also. replaced my pads on my 01 silverado and now the calipers are sticking. I can smell the pads burning after driving around the block, Guess ill be replacing the calipers this weekend. Nice work on your truck. Your going to be done in no time.

Re: my 65 fleetside build
 

sounds like some of my luck. i dropped my frame off today for sandblasting i thought it was a 100 but it turned out to be 75 and he told me he would blast it and powdercoat it for 200, if i hadnt already bought the epoxy i would have jumped all over that, so if anyone in east tn, or surrounding area needs blasting or coating done let me know and i will get you his #

Re: my 65 fleetside build
 

Your making a lot of great progress, it's looking awesome.

Re: my 65 fleetside build
 

flips, just finished going through your entire thread from start to finish. Stayed up til 1am last night, then went through the last few pages at lunch. I am in awe of your remarkable skills, and the speed at which you work. The truck looks fantastic, and no doubt will be a jaw dropper when complete. Just picked up my 66 SWB FS BBW a few weeks ago...

Re: my 65 fleetside build
 

thanks alan, only wish it were half as nice as yours
thanks crgrs66 and welcome aboard, looks as though you have a oustanding truck to start out with, but now is when the fun starts and plenty of sleepless nights dreaming of truck parts:lol:cant think of many better ways to lose sleep though.let me know when you start your thread so i can watch, need to hurry and post some pics, lots of pics so we can check her out. this bunch is crazy about pics me included.

Re: my 65 fleetside build
 

Outstanding job on this truck! One u should be very proud of. Can't wait to see it all together.

Re: my 65 fleetside build
 

flips the rearend looks great, its been two days since you posted that! do you have the rest of the frame done yet, lol!! just playing with ya!!

Re: my 65 fleetside build
 

thanks for the compliments, and i too cant wait to get it back together and see what i end up with.
thanks chad, still havnt got my frame back was hoping for today, maybe tommorrow, i would love to have it painted and re-assembled, any progress with yours lately?

Re: my 65 fleetside build
 

i havent done anything really, with the wife's company plant closing and everything! she will get a severance package thursday from them and its enough to pay are tahoe off! so we aare just going to pay all are bills off and then i'll be able to put more money into my truck! i do still have a lot of stuff in storage for inside the cab, gas tank, and a few other things that will go on the truck for now while the money is tight!!

Re: my 65 fleetside build
 

completely understand about the money being tight, hope everything works out for you guys, its tough raising a family now-a-days on one income but at least she can draw for a while.

still no frame the blasters air compressor went down he said hopefully monday, but i did get some work done in the past few days, my suspension is cleaned and painted ready for the frame and i got to messing around with a dash cluster i had that i wasnt using and mounted my tach in it that was on the column,, as you can see in the pictures the gauge cluster is in bad shape but i have another one on the way, notice the tach has a built in shift light so i drilled a small hole in the plastic and run my dial for setting the shift light through. check it out and let me know what you think

Re: my 65 fleetside build
 

looking good flips, I like the idea with the tach. few more days until charlotte.

Re: my 65 fleetside build
 

Love the tach, is that a 2-1/2" dial tach? Would love to see some detail as to how you mounted it...

Re: my 65 fleetside build
 

thanks, and yeah i cant wait, kinda dreading the drive but still pumped.thanks crgrs 66, actually its a 3 3/4 its made by autogage part#2302 when i get my other dash i will try to go more into depth with it, i have a tendency to get caught up in what i am doing and forget to take pics and descriptions until it to late. still no frame so i did get the shop striaghtened up some.. well at least you can walk through it without tripping now anyway:lol:

Re: my 65 fleetside build
 

Thanks flips, btw, you can just call me Craiger

Re: my 65 fleetside build
 

just got home from a weekend at the charlotte auto fair and it was incredible, never been to a swap meet of that magnitude all kinds of parts, and meet up with one of our board members(allaboutchevelles) super nice guy, and a total gearhead.if you get a chance you need to attend this meet atleast once in your life, there were vendors from as far as california. there were several trucks from our era there one that was silver and had two blowers on it with a huge bugcatcher it was sharp i think i have seen it on this sight before, and several for sale. still no frame , maybe tommorrow.

Re: my 65 fleetside build
 

ill post the pic for you flip.