The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   What did you do with your truck today, take 2 (https://67-72chevytrucks.com/vboard/showthread.php?t=644706)

ChuckDriver 05-22-2015 03:20 PM

Re: What did you do with your truck today, take 2
 
Nice work Roger!

chincha805 05-22-2015 03:22 PM

Re: What did you do with your truck today, take 2
 
Just looked at it.

Dan in Pasadena 05-22-2015 08:32 PM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by roger55 (Post 7181586)
Thanks guys!

Hi Dan.
I does not have much orange peel. I did get a little around the rear window on the back of the cab but the rest has very little. I think the Iwata gun and the extra reducing helped me get it pretty darn smooth for single stage. I used a slow reducer too and I think that helps some.
I did get a few dust nibs. I'm not intending on doing much color sanding. At most I'll just knock off the dust nibs with 1500 and run the polisher over it.

That's excellent if it's that good. MORE congrats. Can't wait to see it come together!

oldman3 05-22-2015 11:31 PM

Re: What did you do with your truck today, take 2
 
2 Attachment(s)
Took off to Mid-American Nats this morning and got back home around 8:00 pm tonight 268 miles round trip, will go back tomorrow and post some pics...Jim

yoshi 05-23-2015 07:55 AM

Re: What did you do with your truck today, take 2
 
1 Attachment(s)
Washed & clayed then out for a little ride

yoshi 05-23-2015 07:57 AM

Re: What did you do with your truck today, take 2
 
1 Attachment(s)
Another angle

roger55 05-23-2015 11:11 PM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by Dan in Pasadena (Post 7182358)
That's excellent if it's that good. MORE congrats. Can't wait to see it come together!

Thanks Dan.

I took a couple of close-ups today. You can see a little peel in there but there just isn't much.

http://www.hotrodders.com/gallery/da...1/IMG_1833.JPG

http://www.hotrodders.com/gallery/da...1/IMG_1825.JPG

la hi 05-24-2015 06:48 AM

Re: What did you do with your truck today, take 2
 
57 swb. I installed my a/c. I put the under dash unit against the back cab wall(it did not look good and stuck out to far under the dash), between the bucket seats. I would rather have it blow cold air on me, however it cools the cab. I prefer to keep the dash open and not try to stuff the a/c under the dash is why I went with the under dash unit.

Softpatch 05-24-2015 01:22 PM

Re: What did you do with your truck today, take 2
 
took some pictures of work done last week for DMV documentation
But after see the "Green truck pictures.....That is very nice work.!
I'm feeling way out of my league.

Maybe I should start a thread ... what hack job did you do to your truck today
........I'll start patches That what I'm calling my truck "Patches"
.
.
http://i288.photobucket.com/albums/l...psmetxkoud.jpg


.
http://i288.photobucket.com/albums/l...ps7epks0ww.jpg
.

.
http://i288.photobucket.com/albums/l...psqfnz53ss.jpg
.
http://i288.photobucket.com/albums/l...psqxkzy5la.jpg
.
http://i288.photobucket.com/albums/l...pstm5dppuf.jpg
.
.
Before
.

.
http://i288.photobucket.com/albums/l...psa4b6ceb4.jpg
.
http://i288.photobucket.com/albums/l...ps2a03e009.jpg
.

Dan in Pasadena 05-24-2015 03:34 PM

Re: What did you do with your truck today, take 2
 
Softpatch,

Looks like you've got your work cut it for you - no pun intended. Roger's green truck IS freaking nice but yours can look just as good. Here on this board you'll get lots of encouragement and good advice. Some of the best I got from Bam(Kabwe) telling me to just keep working at it. Your skills will get better bit by bit, and incredibly mine have. I'm a total hack compared to Roger and Bam and a lot of other guys here but my work is satisfying me. My truck has new metal where it needed new metal and I'm not covering up crap with filler so I suppose that's all that really matters.

Start that "Patches" thread, we'll be looking for it!

ChuckDriver 05-24-2015 10:06 PM

Re: What did you do with your truck today, take 2
 
5 Attachment(s)
Got some work done on the new frame. Had some new rails bent up to go along with the PorterBuilt Fab front and rear coil-over suspension kits!

Stepside Jim 05-24-2015 10:27 PM

Re: What did you do with your truck today, take 2
 
ChuckDriver....ok, so I'm just surfing around and I end up finding the last batch of pics you posted, I haven't paid attention to the title of the site I'm on, but I swear it's got to be something to do with NASA.

Just my weird way of saying "wow" without actually saying it.

WOW, Jim

roger55 05-24-2015 10:53 PM

Re: What did you do with your truck today, take 2
 
Got to be the most awesome TF frame I've ever seen.
Nice job!!!!

oldman3 05-24-2015 11:18 PM

Re: What did you do with your truck today, take 2
 
Looking good JJ...Jim

ChuckDriver 05-25-2015 09:57 AM

Re: What did you do with your truck today, take 2
 
Jim, if you use NASA to describe my build, then I must say you're building a colony on Mars!!

Thanks guys!

Dan in Pasadena 05-25-2015 01:05 PM

Re: What did you do with your truck today, take 2
 
JJ,
What he's saying is your build is, "out of this world!" Lol

By the way, since I've never ever asked you before what WERE your color plans for your truck when it was going to be a stepside and what have they changed to (if they have) now that it will be a Cameo.......or whatever Jimmy "Cameo's" we're called?

Stepside Jim 05-25-2015 01:52 PM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by ChuckDriver (Post 7184872)
Jim, if you use NASA to describe my build, then I must say you're building a colony on Mars!!

Thanks guys!

I'm gonna raise the bar again....;)

I rarely post on this thread except for monumental achievements. Yesterday was time for bed installation. I have a friend, Gary, who has been wanting to participate on my truck build, I am so glad he came over, we got the bed on the truck with no issues.

During my build I knew I wanted two tone, I've seen many different ways to split the colors. I chose to follow the main body line but as we all know, the rear fenders drop this body line some 3 or 4 inches. Up til the last day I finally decided how I was going to blend the pin stripes together. Pictures tell the story.
http://i1139.photobucket.com/albums/...ps9vlcohgy.jpg

That's the outcome, I don't like to clutter this thread, I'll post the rest of the pics on my build thread listed below. Jim

yoshi 05-25-2015 04:32 PM

Re: What did you do with your truck today, take 2
 
1 Attachment(s)
I had a chat with some bloke about my truck

Softpatch 05-25-2015 08:04 PM

Re: What did you do with your truck today, take 2
 
jimmy Shine.?
.
What he say.?

ChuckDriver 05-25-2015 08:26 PM

Re: What did you do with your truck today, take 2
 
Quote:

Originally Posted by Dan in Pasadena (Post 7185075)
JJ,
What he's saying is your build is, "out of this world!" Lol

By the way, since I've never ever asked you before what WERE your color plans for your truck when it was going to be a stepside and what have they changed to (if they have) now that it will be a Cameo.......or whatever Jimmy "Cameo's" we're called?

Thanks Dan, I'm thinking of some shade of blue, eventually!

57chevyman 05-27-2015 08:07 PM

Re: What did you do with your truck today, take 2
 
3 Attachment(s)
got most of the bed on the truck and the wood boards. got the taillights on too . gonna paint the bed with rustoleum for now, same like the front panel

57chevyman 05-28-2015 08:31 PM

Re: What did you do with your truck today, take 2
 
2 Attachment(s)
tailgate :)

yoshi 05-30-2015 08:34 AM

Re: What did you do with your truck today, take 2
 
1 Attachment(s)
Putting the wood in

Fleet58 05-30-2015 02:45 PM

Re: What did you do with your truck today, take 2
 
Hows the quality on that panel?

Fleet58 05-30-2015 02:55 PM

Re: What did you do with your truck today, take 2
 
Mustang tank, What year?


All times are GMT -4. The time now is 03:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com