Re: Do you need '64-'66 Chevy Truck Parts?
 

I know this is a long shot, but I'm looking for hinges for the upper rear hatch from a panel or suburban. Any chance you have any?

Thanks,
Steve

Re: Do you need '64-'66 Chevy Truck Parts?
 

Steve:

Thanks for the inquiry. Unfortunately, I don't have any Panel/Suburban parts in my 4-5-6 Chevy truck parts inventory.

You may try a fellow who goes by the name RJ over on www.stovebolt.com. He deals with a lot of '60-'66 Panel/Suburban parts and I have done some business with him in the past. Another fellow to try would be colettesbro on the stovebolt site. Both of these fellows are good to deal with and have lots of '60-'66 Chevy truck/Panel/Suburban parts to choose from.

Sorry I couldn't help you with this item, but please keep me in mind for other 4-5-6 Chevy truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony,
I have a 64' SWB fleet that I am wanting to lower 6' in the rear or more. So with that said I am planning on putting in ECE's center drop crossmember for clearence issues there. Thus bringing me to my final issue of using their Super trac bar kit that is suppose to be only good on trucks starting in 65' due to the fact of where the stock pan hard bar mounts on the frame. I guess the location differs on my 64' I dont know cuz I have nothing to compare it to. Anyways do you think if I was able to get a later model frame side mounting bracket it would mount up to my 64' and work? Which brings me to my last thing of........would you have one of these mounts?

Sorry for the short novel
Any help is much apprieciated.

Tom

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks Tony! I checked with RJ over at stovebolt and he does in fact have a pair! :metal:

If I ever need anything else 4-5-6 related, you will be the first one I come to!

Re: Do you need '64-'66 Chevy Truck Parts?
 

I know you listed 4-5-6 parts, but I would REALLY like to throw a 60-63 Dash in my square body...know where I could find one?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tom:

Thanks for the inquiry. I will have to check the '64 and '65-'66 2wd frames I have to see if there is any difference between the years. In any case, I have a '64 and a '65-'66, so I am sure I can help you in either case. I will need to remove it from the frame, so I will wait to hear from you before doing so.

As far as the other lowering/frame modification questions, I am a little under-educated on that stuff, because I run my stuff on the stock running gear, however ChiefRocka, PrerunnerRob, MorbidFabrication, YOLO and a few others on this site can chime in and shore you up on what works. They are some of the very active fabricators on this site and have done this type of thing. They may have a better suggestion than trying to fabricate/modify a factory panhard bar frame mount.

Also, you should post your questions in the Suspension forum or in the general forum for '60-'66 Chevy trucks, because you will get a great deal of good information from the experts. Let me know if can help you with this part or other 4-5-6 Chevy truck parts in the future.

PS-to the fellows that I didn't mention above as the fabricators on this site, those were the few names that came to mind at 4:00am, so no offense if I left you off the list.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Your'e killing me Smalls...just kidding. I bet you hear that all the time! I am glad you found what you needed and please keep me in mind for your other 4-5-6 Chevy truck parts in the future. RJ is a good source of parts and information about the 4-5-6 Chevy trucks. He has a pretty good nitch going on over there at stovebolt, so keep him in mind, as well for some of the hard to find stuff.

PS-www.stovebolt.com is another good source of information and parts. Several members here can be found lurking around over there, as well.

Re: Do you need '64-'66 Chevy Truck Parts?
 

badblu97:

Thanks for the inquiry. I am fresh-out of '60-'63 specific stuff, so I don't have any dashes at this time. If you need one, post a new topic under this forum, Parts for Sale, and you will get some replies.

If you can't find what you need on this great site (not joking when I say great), you may also try a fellow named RJ at www.stovebolt.com. He is out of Denver, CO. He specializes in '60-'66 Chevy truck/Suburban/panel stuff. Also a fellow named colettesbro on the stovebolt, out of Minneapolis, MN sells a lot of '60-'66 Chevy truck stuff, as well.

Sorry I couldn't help you with this item, but please keep me in mind for your other 4-5-6 Chevy truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

tony, looking for a 60-66 steering wheel and horn cap in good condition.

thanks, paul

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for gettin back to me. I'll have to do some more research on the suspension forum and see what it is that I need to do to make things work. I do have another inquiry though. Would you happen to have and or know where to get a power stearing pump bracket for an inline 250?

Re: Do you need '64-'66 Chevy Truck Parts?
 

do you have a set of the factory white hubcaps for the 64?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. 1/2 ton or 3/4 ton? I have both, but they are different, so I need to know which ones you need.

Both sets I have are "driver-quality", so they would need to be repainted if you want "show-quality". Let me know and I will provide pictures, description and prices accordingly.

Happy Holidays.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Paul:

Thanks for the inquiry. I have a few good, used standard steering wheels and chrome horn buttons. Do you also need the additional parts to complete the horn assembly? The wheels I have available have some hairline cracks, so if you want "show-quality", I will not be able to help you out, but the wheels I have are good, used, "driver-quality" with a few hairline cracks and some wear-marks.

Let me know if I can help you with these items or other 4-5-6 Chevy truck parts in the future. Happy Holidays.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I need them for a half ton. pics would be great if you can provide

thnaks

Jeff

Re: Do you need '64-'66 Chevy Truck Parts?
 

red , i pmed u , i need one door hinge .

Re: Do you need '64-'66 Chevy Truck Parts?
 

hi tony,still keen on parts but i want to get the silly season out of the way and make the shipment worthwhile and the nz dollar is real crap against the us at the moment so will keep in touch and will work out the other parts i need then will let you know
cheers karl ps

Re: Do you need '64-'66 Chevy Truck Parts?
 

Do you still have that 3 speed transmission? I have a 1965 that's having a hard time going from 1st to 2nd. It's the really small 3 speed trans...saginaw I believe.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Paul:

Thanks for the inquiry. I have several '60-'66 Chevy standard steering wheels & horn buttons, but all of them need a little freshening up, due to some hairline cracks and wear-thru of the paint around the perimeter. They are in good structural condition, but not visually.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I have never seen one of these in person, only on eBay, so I don't have one at this time. Sorry I couldn't help, but thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

rayce08:

PM sent. Please let me know if I can help you with a door hinge or other 4-5-6 Chevy truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

truckjunky:

Thanks for the inquiry. I have a factory three speed tranny from a '64, but the shipping will be cost prohibitive. Perhaps you can find one locally. Sorry I couldn't help you with this item, but thanks for the opportunity and please keep me in mind for other 4-5-6 Chevy truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Looking for complete factory throttle linkage for my 66 including rod etc.

Re: Do you need '64-'66 Chevy Truck Parts?
 

quickchevy:

Thanks for the inquiry. Do you have a six or a V8? Do you need the rod and the accelerator assembly that attaches through the firewall? I have all of it but I need to know exactly what you need.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I just found one completely refurbished for $450.00 .... Does that sound like a good price? I also found one with some miles on it for $350.00??

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony have you come across a tach dash for a 64 yet?:chevy: