Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Brushed Aluminum Trim is on

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

lookin sweet, can't wait to see it complete, keep up the good work

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Very slick kat!!!

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

That's one sweet ride! :metal::metal:



Tony
Posted via Mobile Device

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

We will be attending / vendor booth at the "Gopher State Timing Show" this weekend at the Minnesota State Fairgrounds. Stop by the Extreme Powder Coating booth and check out the C-10 "NO PAINT" project.

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Bead Rolled the Filler Panels in the Bed ;)

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Bead rolled panels are perfect!

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

KIller looking bed panels..

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

All set up at the 55th.Aniv. of the " Gopher State Timing Assoc. " Autorama

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Project " NO PAINT" showing real well ... Stop by the Extreme Display at GSTA show.

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

some pictures of us loading up for GSTA and some pics from the show :)

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Can we get pictures of the interior? Beautiful and cool.

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Well, We have posted pics. of the 61 impala dash and the custom door panels. We can post more but the truck is about ready for tear down and we will start powdercoating the frame / firewall / inside of cab etc. The truck will then go to Hudson Hot Rods in Tenn. for the interior. It will have a 60's retro vibe with a little carpet and some trick removable floor mats. Stay Tuned!!!!!! ;);););)

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

wow! read the whole thing! Killer workmanship! Keep up the good work and have fun showing it around.

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Killer progress! Glad to see it made it to the show.

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Updates will be posted Tuesday ... Stay Tuned ;););)

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Tie Down Rack for haulin powder and parts :metal:

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Very slick!!

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Dino, Maybe "NO PAINT" will make an appearance this Fall at Good-Guys in Scottsdale, AZ ??????? ;););)

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

I'm fricken' loving the truck! That rack is sweet. Giving me some ideas for mine.

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Luggage rack : check! Mock up of license plate : check! KRC Quick Disconnect Linkage : check! Productive this week! Glad to have Frericks back in the shop!

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

Also, been tearing the truck down and removing trim parts from the cab...getting ready for powder coat .... stay tuned!

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

What parts do you plan to PC?

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

We will be powdercoating the complete chassis.. rear end etc. we will also be coating the firewall and underside of cab. The complete inside on the cab and dash with center console will be powdercoated also. As well as the cab roof. We will sand it back ... make it look weathered and powder it also with the flat clear.

We also will be coating the body panels ( over the patina) with a flat powder clear coat. We have done some testing and it locks in the patina very well.

We will also use the flat clear on all the alum. panels that have been custom built.

Re: Extreme Powder Coating '65 C-10 Shop Truck
 

duuude dont tease!! But call me if you do!! LOVE DIS TRUCK!