Re: Lets Play Whatz It? !!
dis holddown wrech?
|
Re: Lets Play Whatz It? !!
Nice try, But no.
|
Re: Lets Play Whatz It? !!
7/8 and 1 inch tranmission vacumm mod wrench? Everyth7ng is electric now
|
Re: Lets Play Whatz It? !!
Heater Valve wrench.....or really just an Offset Open-end wrench.....even if it has a special use, they make 100 different versions.
Some with box ends, some with 12pt's etc. |
Re: Lets Play Whatz It? !!
Quote:
Yes, Vacuum Modulator wrench. Quote:
|
Re: Lets Play Whatz It? !!
Quote:
|
Re: Lets Play Whatz It? !!
Quote:
|
Re: Lets Play Whatz It? !!
Where we at? whats the next tool?!?
|
Re: Lets Play Whatz It? !!
1 Attachment(s)
Here's another....
|
Re: Lets Play Whatz It? !!
An attatude adjuster? Depending on where the torque is applied...
|
Re: Lets Play Whatz It? !!
Looks like a barrel bung tool... maybe just looks a little short.
|
Re: Lets Play Whatz It? !!
2 Attachment(s)
That one is kind of tough, So I will give you guy's the answer.....LB7 Duramax Injector Puller.
Here's an easier one. |
Re: Lets Play Whatz It? !!
Battery terminal spreader.
|
Re: Lets Play Whatz It? !!
Hmm.... but it looks like something my dentist has used on my teeth... scary... I know he wrenches some too... :jdp:
|
Re: Lets Play Whatz It? !!
John got it.
|
Re: Lets Play Whatz It? !!
eeeeeeeewwwwwwwwww. :(
Next? |
Re: Lets Play Whatz It? !!
|
Re: Lets Play Whatz It? !!
Those are used to trim horses hoofs.
|
Re: Lets Play Whatz It? !!
nope...........
|
Re: Lets Play Whatz It? !!
Barb wire fence/fencing tool
|
Re: Lets Play Whatz It? !!
|
Re: Lets Play Whatz It? !!
wire crimper
|
Re: Lets Play Whatz It? !!
terminal crimper for battery cables? looks big to be a normal crimper
|
Re: Lets Play Whatz It? !!
....not electrical related...
|
Re: Lets Play Whatz It? !!
Hose clamp crimper ?
|
Re: Lets Play Whatz It? !!
Wheel weight removers ?
|
Re: Lets Play Whatz It? !!
this one is bugging me......
hmmm..... bearing cap tool? |
Re: Lets Play Whatz It? !!
think auto body .....
|
Re: Lets Play Whatz It? !!
I wondered auto body
Fender bender lol ? Crimps maybe a door skin bend? |
Re: Lets Play Whatz It? !!
Quote:
ding..ding..ding.. Fender Bead pliers for fixing the bead on the wheel opening of much older fenders. From the catalog..... http://i5.photobucket.com/albums/y16...beadpliers.jpg Text for the BF-81 ad: Every body worker should have this Forming Plier for perfect edging of damaged fenders. Fenders are made from heavy gauge steel and the fender edging or bead is not readily reshaped. This tool combines the principle of a compound leverage plier and fender dolly. The wedge nose on the lower jaw is used to pull out turned under beads to insert the mated forming jaw. Forming is readily accomplished by gripping the bead firmly in the plier jaws and employing a rotating motion. The flat spot on top of the jaw can be struck with a hammer to assist in the forming operation. The inside of the jaws are undercut to allow ample clearance for the roll of the fender. |
Re: Lets Play Whatz It? !!
5 Attachment(s)
OK guys, usually I challenge with things that I have already
ID'd but this has me stumped. I have added a pic of the brand to help (BINGO). Tool is about 12" from the top to bottom, not including the screw's handle.. Not sure if the one chain is meant to go down around the other and note the "leaf springs" on the mobile cross bar. . |
All times are GMT -4. The time now is 09:52 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com