The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   What Did You Do With Your Truck Today ? (https://67-72chevytrucks.com/vboard/showthread.php?t=486137)

55Cameo 04-13-2012 06:26 PM

Re: What Did You Do With Your Truck Today ?
 
I drove my truck to my hobby unit to start on my rebuild with lots of upgrades!!! I'm very excited because its gonna get the long well deserved much needed love. I finally get to do things the right way.
Ill be making a build thread n post pics soon
Posted via Mobile Device

Russell Ashley 04-13-2012 07:37 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Dan in Pasadena (Post 5311643)
Smart and a LOT better looking than pop rivet heads showing. Though I suppose you could dimple the pop rivet locations and then fill with weld or filler and smooth them over. I also wonder if you even NEED these rivets/bolts? Won't the 1/2" bolt hold the backing plate adequately all by itself?

You do need the rivets or screws. The anchor bolt that holds the belt has a shoulder about 1/2 inch long, which tightens against the bracket, not the cab wall. It would be kind of sloppy and rattle if you didn't have the rivets or screws.

Speedbumpauto 04-13-2012 08:30 PM

Re: What Did You Do With Your Truck Today ?
 
2 Attachment(s)
Finished the bed inside this afternoon. Roll pan, fenders and put it on the frame next week. It's Miller time now!

Dan in Pasadena 04-14-2012 12:24 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Russell Ashley (Post 5311926)
You do need the rivets or screws. The anchor bolt that holds the belt has a shoulder about 1/2 inch long, which tightens against the bracket, not the cab wall. It would be kind of sloppy and rattle if you didn't have the rivets or screws.

Oh, ok got it. Makes snese.

55Cameo 04-14-2012 01:13 AM

Re: What Did You Do With Your Truck Today ?
 
2 Attachment(s)
here's a couple pics

oldcouple 04-14-2012 07:28 PM

Re: What Did You Do With Your Truck Today ?
 
Detail painted the inner door frame, and inside step, used the spray bedlinner stuff on the steps looks nice, now if I can just keep it clean. Wrinkle painted the upper part of the dash, lots of masking. Lower dash and ceiling and rear of cab to go.

yossarian19 04-16-2012 10:27 AM

Re: What Did You Do With Your Truck Today ?
 
Actually it was Saturday but I got the truck out from under the cab-over camper, all the loose underhood parts secured in place with bailing wire, piled all the loose nuts, bolts, driveshafts etc into the cab, loaded the cylinder head (HEAVY!) into the bed & got it ready to tow back to Berkeley.
The truck lives in Grass Valley at the moment, but I'm finally just one trip with a trailer away from bringing it back to the shop in Berkeley. ~3 hours drive each way.
Oh, and I continued obsessing over which brake kits, which engine, which carpet & which gas tank I'm going to want.

focusedontheprize 04-16-2012 11:23 AM

Re: What Did You Do With Your Truck Today ?
 
Ordered my hardware for the suspension, battery box, and polyliner for my leaf springs. This weekend is going to be a wash, but the following weekend I will pick up the rear end out of the yard and hopefully have the front end suspension put back together.

51 okie 04-20-2012 07:02 PM

Re: What Did You Do With Your Truck Today ?
 
Recently added the chrome wheel center caps. Today I threw an old bed in the back and took it to Salvation Army. Fun to drive that beast.
http://i136.photobucket.com/albums/q...n/IMG_0799.jpg

rollenhard 04-20-2012 08:48 PM

Re: What Did You Do With Your Truck Today ?
 
Hey 51 okie cool looking truck

LDO 04-20-2012 09:24 PM

Re: What Did You Do With Your Truck Today ?
 
I put on some new 'shoes' on the ol' girl. 15x8 Rallys on 245 60 15s. I am happy, happy!!

http://i41.photobucket.com/albums/e298/LDO05/Bev.jpg

Rudoo 04-20-2012 09:34 PM

Re: What Did You Do With Your Truck Today ?
 
Looks good Bob!

Quote:

Originally Posted by LDO (Post 5326645)
I put on some new 'shoes' on the ol' girl. 15x8 Rallys on 245 60 15s. I am happy, happy!!

http://i41.photobucket.com/albums/e298/LDO05/Bev.jpg


LDO 04-20-2012 09:49 PM

Re: What Did You Do With Your Truck Today ?
 
Thanks!
It finally looks like it does in my head!

55Cameo 04-20-2012 10:20 PM

Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
Pulled the motor ans trans out today

Russell Ashley 04-21-2012 07:19 AM

Re: What Did You Do With Your Truck Today ?
 
Removed my rear fenders in preparation to working on my bed. I didn't like clutch head bolts before, now I really really don't like them, LOL.

Bob, looks great. Nice improvement IMO.

youngrodder 04-21-2012 08:48 AM

Re: What Did You Do With Your Truck Today ?
 
I started installing my carpet and worked on my speaker pods that go into the kick panels. I also finished wiring up my interior lights through the door jam switches.

Marc

Speedbumpauto 04-21-2012 10:02 AM

Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
Fenders and bed installed on frame.

lowdownstar 04-21-2012 07:24 PM

Re: What Did You Do With Your Truck Today ?
 
Man that thing looks like a beast!!!!! can't wait till you have it all together


Ray

55Cameo 04-21-2012 07:58 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Speedbumpauto (Post 5327402)
Fenders and bed installed on frame.

That looks real nice. Like the fat meats in the rear!

Speedbumpauto 04-21-2012 08:07 PM

Re: What Did You Do With Your Truck Today ?
 
Thanks, guys. It's a hot rod.....ya can't have too big a tire or too many carbs! :uhmk:

Kabwe 04-21-2012 08:13 PM

Re: What Did You Do With Your Truck Today ?
 
Speedbump,

That thing looks wicked. I likes. Good job man.

shadow1967 04-21-2012 09:18 PM

Re: What Did You Do With Your Truck Today ?
 
Speedbump, Looks cool! Love what you did with the paint on the body line difference. I dislike the curved down line, no imagination.

oldcouple 04-21-2012 10:15 PM

Re: What Did You Do With Your Truck Today ?
 
3 Attachment(s)
Detail work, painted the dash with wrinkle paint,, inside steps with spray bed liner, detailed door jambs, took the bed off to begin painting the frame and install the new gas tank. Discovered my cross member that the shocks bolt to is bolted in, instead of riveted, one sides bolts were loose, so thinking new grade 8s and nylocks may keep that from happening again.

OrrieG 04-22-2012 12:21 AM

Re: What Did You Do With Your Truck Today ?
 
3 Attachment(s)
Worked on the steering wheel. Got the horn adaptor figured out and fabbed. Dremmeled out the cracks in the steering wheel. Tomorrow will epoxy and start sanding it. I will post details in my build thread.

Rude Dude 04-22-2012 07:18 PM

Re: What Did You Do With Your Truck Today ?
 
3 Attachment(s)
More sanding on my $40 manifold, I included the before pic as well , almost ready to polish

youngrodder 04-22-2012 11:34 PM

Re: What Did You Do With Your Truck Today ?
 
3 Attachment(s)
Started install my jute pad and carpet. I have a center console that will cover the seam in the middle. I also test fit one of my speaker pods. Car show in (2) weeks so I'm in trash mode...ha ha

Marc

lazerstrouts 04-23-2012 12:21 AM

Re: What Did You Do With Your Truck Today ?
 
Fixed all the grounds on my tahoe chassis so the old beast has 4wd and brake lights again.
Posted via Mobile Device

OrrieG 04-29-2012 09:24 PM

Re: What Did You Do With Your Truck Today ?
 
Sanded the steering wheel first epoxy coat and applied second. Worked on cleaning up the tailgate cable bracket welds. Guide coated and blocked the bumpers. Feels like progress.

shadow1967 04-29-2012 09:27 PM

Re: What Did You Do With Your Truck Today ?
 
2 Attachment(s)
Well, I made a MESS!!

handyhands 04-30-2012 09:50 AM

Re: What Did You Do With Your Truck Today ?
 
2 Attachment(s)
I have been cleaning out the wheel wells, angle grinder with heavy wire wheel.
works pretty good, plan to use it on the bottom of cab as well. 53/s10

youngrodder 04-30-2012 09:56 AM

Re: What Did You Do With Your Truck Today ?
 
2 Attachment(s)
I finished one speaker pod and mounted the speaker. I'm working on the driver side now. This was my first attempt at making fibergalss speaker pods. I learned a lot.

Marc

Daze57 04-30-2012 06:28 PM

Re: What Did You Do With Your Truck Today ?
 
very nice work

Amorget 04-30-2012 06:48 PM

Re: What Did You Do With Your Truck Today ?
 
Spent nearly $1,000 in parts today buying everything from cab corners to bed mounts. Fingers cross that the bulk of the buying is now done.

For my and my wife's birthdays (we are only a couple weeks apart) her family bought almost all of the exterior lighting for the truck, so that is exciting, too!

51 okie 04-30-2012 07:58 PM

Re: What Did You Do With Your Truck Today ?
 
NIce fiberglass work Youngrodder. Looks great.

youngrodder 05-01-2012 11:38 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by 51 okie (Post 5345692)
NIce fiberglass work Youngrodder. Looks great.

Thanks man, I learned a lot. I still need to make a cover to cover up my computer for my engine seen in the pic. I also need to figure out the back of the cab.

Marc

72ArizonaBurb 05-01-2012 06:27 PM

Re: What Did You Do With Your Truck Today ?
 
Youngrodder nice design on the speakers. Looks like a front headlight. Too cool:).

Atommik 05-01-2012 09:56 PM

Re: What Did You Do With Your Truck Today ?
 
2 Attachment(s)
Got the cab jammed!!

oldcouple 05-02-2012 03:34 PM

Re: What Did You Do With Your Truck Today ?
 
4 Attachment(s)
Floating bed, cleaned and painted the frame for the new gas tank.

candiceh 05-02-2012 06:28 PM

Re: What Did You Do With Your Truck Today ?
 
Drove my 1956 3100 to work today.I decided to drive it to work today.I had lookers all over it including a couple of my client's sons telling me cool truck.

Amorget 05-02-2012 06:32 PM

Re: What Did You Do With Your Truck Today ?
 
Spent an hour and a half drilling out rusted bolts. Mostly it was the stupid clutch head bolts holding the rear fender on. Should of just skipped buying the clutch head sockets and started with drilling them out, would of saved a couple hours of cleaning and fighting with them.

Anyone else up for finding out who created clutch head bolts and who decided they'd be a good idea to hold the rear fenders on and take them out back??


All times are GMT -4. The time now is 01:21 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com