![]() |
Re: What did you do with your truck today, take 2
Truck looks great Russell! Makes me want to do a patina blue on mine!!
|
Re: What did you do with your truck today, take 2
Just finished installing a lower bearing in my stock column to use with on my Camaro clip, I bought 2 qty-R12zz bearings for $6 delivered off EBay, Actually only needed 1(+1 spare)
I cut the stock column and shaft off almost flush with the gear box I then cut the tapered part of the column off so I have about 1 1/2" of shaft extended the bearing is .030 larger than the ID of the column so I cut 4 slits in the end of the column and bent each tab of the column out slightly to accept the bearing. I then welded a 7/8" washer on the end of the column and welded up the slits and ground smooth. Just had to weld slow not to overheat the bearing. Simple & smooth $3 solution , No need for a $70-$80 column bearing saver. +++++++++My prayers are with you Russell.++++++++++++ |
Re: What did you do with your truck today, take 2
Russell, we are keeping you in our daily prayers.
|
Re: What did you do with your truck today, take 2
Well it wasn't today, it was a few days ago! I purchased the plate to relocate the water pump on a 62 235 sitting in a 49 3100. The plate allows you to run the earlier water pump on the later 235 so the fan will actually be almost center on the radiator.
I followed the direction that came with the plate, however I couldn't get it to stop leaking with out the gaskets. So I ended up using both gaskets with sealer and so far so good. Was also able to use the stock lower radiator hose. That's nice and clean now. Yes the directions recommend just using sealer no gaskets! No Bueno |
Re: What did you do with your truck today, take 2
5 Attachment(s)
washed the truck and took some pics!
|
Re: What did you do with your truck today, take 2
Looking great, Frank! I'm jealous, mine's a pile of parts right now.
No pics because they'd be boring but I stripped my driver's door of EVERYTHING inside and out to drop it off at the sandblaster this week. I'll do the passenger side tomorrow. Painter wants to fit them to the cab and set up the gaps. So far, I'm very pleased with this body man. |
Re: What did you do with your truck today, take 2
3 Attachment(s)
Been working on this most of the summer instead of driving Clarance J. Finally got the holes in firewall filled in and got the paint on today. Learned a few things about painting that are going to be helpful in the future. Just love working on this old truck. Putting the motor stuff back on tommorrow. One more thing to check off the list. Only 999 more things to go. Yahoo!
|
Re: What did you do with your truck today, take 2
much improved. good job.
|
Re: What did you do with your truck today, take 2
Looks very good Earl!
|
Re: What did you do with your truck today, take 2
Looks great!
|
Re: What did you do with your truck today, take 2
looks awesome earl! nice job with the battery relocation too!
|
Re: What did you do with your truck today, take 2
1 Attachment(s)
Remeasured for air ride tanks and ordered two of these. Like the fact they come with adjustable mounting brackets.
|
Re: What did you do with your truck today, take 2
2 Attachment(s)
Weekend project:
Installed new HEI Dist and new Edlebrock carb and fuel pump and lines. Other than the massive vacuum leak that from the carb everything looks an runs good. I will have to pull the carb and reinstall. |
Re: What did you do with your truck today, take 2
2 Attachment(s)
Took a couple of pics to send in for a calendar contest. The least I'll get is a free shirt!
|
Re: What did you do with your truck today, take 2
Quote:
|
Re: What did you do with your truck today, take 2
ATOMMIK
lookin great ! |
Re: What did you do with your truck today, take 2
OrrieG. I made the battery box so that the tray slides out and then tilts forward for battery R&R or maintenance.
|
Re: What did you do with your truck today, take 2
2 Attachment(s)
Fixed my gas tank sender unit that not worked because of rust.
Attachment 1446358 Also started to prepare for Mustang II installation Attachment 1446362 |
Re: What did you do with your truck today, take 2
No pix (they'd be boring anyway) but finally got out two VERY stubborn clutch head screws holding in the window winding mechanism on my driver's door.
After not having a clue how to get the guts out of our doors I figured it out on the passenger side and thought the driver's side would be a snap - NOT. The clutch heads tore out and I had to use a chisel to get them to rotate. Both doors are now ful,y naked and will be dropped off at the blaster's tomorrow and later in the week to the bodyshop. |
Re: What did you do with your truck today, take 2
Quote:
|
Re: What did you do with your truck today, take 2
Looked under mine...then mowed the yard. Oh, and I counted the splines on the axle for the diff center section....28.
|
Re: What did you do with your truck today, take 2
Installed the horns, but had to troubleshoot the wiring for them. Turned out that either the wire between the horn relay and the column harness came loose, or was hidden in the harness and I did not notice it. After I got it corrected found one horn has decided to bleat instead of honk so will need to dig another out of the stash. I tested it before I cleaned and painted it, but who knows what happened. Nice to know my steering column adaption is going to work. First time ever the truck has had a horn, it was MIA when I got it in 76.
|
Re: What did you do with your truck today, take 2
That ATOMMIC truck is sweet. Nice job. You should absolutely make that calendar.
|
Re: What did you do with your truck today, take 2
1 Attachment(s)
Picked up the new block and heads this am. Prepped, primed and put color on it. Waiting on the new high rise to come in, hopefully we'll have it back in the truck next week!
|
Re: What did you do with your truck today, take 2
Worked my tail off looking for pictures of '58/'59 truck three on the tree shift control rods on the internet, to no avail....
|
Re: What did you do with your truck today, take 2
1 Attachment(s)
Took a ride out to Holt train station for a 1940's weekend event. Had a lovely day, spitfire flying over added to the 1940's atmosphere
|
Re: What did you do with your truck today, take 2
3 Attachment(s)
Quote:
|
Re: What did you do with your truck today, take 2
Reaffirmed my build direction and motivation by reading this forum (thanks for the pickmeup, guys) and re-watched some favorite how-to videos online. Then coming to the realization that another parts buying frenzy may be needed...and the plastic money i was using for this build was getting hot enough already. :devil:
|
Re: What did you do with your truck today, take 2
working on getting my firewall prepped for some paint so I can then work on freshening up the engine and putting it back in. no pictures sorry.
|
Re: What did you do with your truck today, take 2
Installed a battery isolator switch after having the battery drained two times (after 3 weeks not running the truck).
Hope this will solve the trouble. |
Re: What did you do with your truck today, take 2
Over the weekend I built a custom overhanging brake pedal and steering column bracket assembly for my 56 GMC. Part of it came from a '70 Chevrolet pickup. It's definitely unique!
|
Re: What did you do with your truck today, take 2
Bought clear to finish the doors and misc interior stuff. Also go a pint of the green I think will work to try out.
|
Re: What did you do with your truck today, take 2
Changed my thermostat/housing to the newer style, installed a higher temperature unit (187 degree) and solved the issue with electric fan control. Truck now runs at a constant 185 to 195 degrees and the fans never come on until I'm setting for about 5 Minutes. Before it would average 165-175. Oh, also yesterday I installed insulation under the seat to the back of the cab.
Rob |
Re: What did you do with your truck today, take 2
Finally pulled the body off after installing M11 front suspension and four link rear.
Also took 21" out of the wheelbase to make it a short box. Now I need to pull the motor plum the brakes and paint the frame.http://IMG_0126 |
Re: What did you do with your truck today, take 2
Stripped the front end of the frame in preparation for installing the Mustang II cross member this weekend. Finally getting some time to get the project going again.
|
Re: What did you do with your truck today, take 2
2 Attachment(s)
Engine blig arrived, heavy aluminum air cleaner to match the M/T covers, just needs paint between the polished grooves. Got the raised base to clean the HEI.
|
Re: What did you do with your truck today, take 2
2 Attachment(s)
before and after today. Paint tomorrow (just the firewall)
|
Re: What did you do with your truck today, take 2
3 Attachment(s)
Painted interior side of doors, inner door panels and misc. trim so I can finish the inside.
|
Re: What did you do with your truck today, take 2
Getting ready to lift my engine out, sold the manual trans last week.
[IMG]http://i33.photobucket.com/albums/d9...pssszjdink.jpg[/IMG] |
Re: What did you do with your truck today, take 2
1 Attachment(s)
Went to a auto jumble today, not much jumble but more vehicles than expected
|
All times are GMT -4. The time now is 01:42 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com