![]() |
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Painted some of the parts needed to put the engine bay back together, but the best part was getting a 67 steering wheel in the mail. My 67 currently has a 70 style, and I can't wait to put the correct one in. It was a good deal on a "buy it now" on the auction site, and the bonus was the nice horn button with no broken tabs that came with it. Plus it has all the internals to make it go beep! Will eventually restore it in black, but will install as-is to enjoy for now. Benny likes it...
|
Re: What did you do to your truck today.The 3rd chapter
Hello,
Replaced my after market, all aluminum radiator. Well out of warranty, but the rad shop owner checked for electrolysis but didn't see any and after discussing it with the maker, they decided to issue a new replacement!!! :metal: Also checked/cleaned the ground from the battery to rad support and installed new air cleaner element. Tommorrow's plans include servicing the rest of the truck (oil, grease, filters) and checking all of the rest of the grounding straps. If time allows, rotating the tires. Rad shop was Best Radiators in Hays ks. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Changed out my starter and starting circuit due to a no start condition. When I came across this splice in the ignition wire, I knew I was doing the right thing. Yes, that is a common household wire nut.:gmc2:
|
Re: What did you do to your truck today.The 3rd chapter
Now that was a mess
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
I test fit fit my bed wood Today in between thunder storms. And I marked their position for later. Still a ways off from done.
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Got home Saturday from the 2019 Hot Rod Power Tour. Washing the truck Sunday and noticed brake fluid between the master cylinder and booster.
Called and ordered it got it Monday and painted it and installed it today. Bleed everything and now have brakes again.:chevy: |
Re: What did you do to your truck today.The 3rd chapter
Started removing the two auxiliary tanks today to have them cleaned out if possible, I would like to save them.
Tanks have not been used in 20 years, we will see what they look like inside when they are removed... https://cache.nebula.phx3.secureserv...6-5304b3abdc9d https://cache.nebula.phx3.secureserv...0-403c41b168e6 https://cache.nebula.phx3.secureserv...c-d5b6eaade659 |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
Prepped the bed for the 68 for paint. Just need to hit it with 400 and spray it tomorrow. Did the steelies for the 72 came out nice. PPG single stage urethane they were definatly powder coated MEK didn't touch it bought them last year from road ready wheels. First picture is sanded. Second after two coats third after three and pretty much cured.
|
Re: What did you do to your truck today.The 3rd chapter
Got the Saddle tanks pulled today, Noticed a tear in each side of the bedside due to where they mounted the tank bracket to the lower wheel well.
https://cache.nebula.phx3.secureserv...1-e67042169b7a https://cache.nebula.phx3.secureserv...7-41ff707f56a1 https://cache.nebula.phx3.secureserv...8-616f4379aa4e |
Re: What did you do to your truck today.The 3rd chapter
Replaced doughnut gasket and tightened up header pipe, rehung left exhaust pipe and replaced the 2 3-Lbs coffee cans and baling wire that hold the round muffler together. Neighbors will never even hear me leaving at 06:00 anymore.
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Did a test fit of the wood for my 68. Now just need to cut to length and stain . I'm going with the lighter of the two blacks. New bedstrips should be in this week.
|
Re: What did you do to your truck today.The 3rd chapter
This post isn't so much about what I did today.. More like what I've been doing the past year to fix a reoccurring problem.. When I bought my '71 in December of 2017, the fuel gauge didn't work.. When I removed the sending unit, I found the brass float had partially "dissolved".. I ordered a replacement along with a spare float a little less than a year ago. I replaced the unit, and before the truck had consumed a tank of gas, the gauge failed again.. The new float had developed a leak in the soldered seam.. I replaced the float with the spare I had ordered.. In a brief period, the second float failed at the seam also.. I contacted the company I bought the sending unit from and they sent me a replacement sending unit.. That was about a month ago, while the unit was still within the one year warranty.. Well ---- you guessed it.. Another float has failed.. I don't know what's causing so many floats to fail in the same area, but this time I'm looking at a different fix for the problem..
|
Re: What did you do to your truck today.The 3rd chapter
Crappy solder joint would be my take. When you solder the float pieces together, there will be low pressure inside as the parts cool. That can suck solder in, causing a leak. Maybe try a bead of JB Weld? I had a plastic one from a Buick that I sold. I ended up using that after one repair attempt on the brass float. I didn't think of the JB Weld at that time.
|
Re: What did you do to your truck today.The 3rd chapter
Changed the engine oil.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Rained today so I went and bought more paint for the 68. My wallet is very light now:lol:
Grumpy I'll post some pics of the unpatina'd truck in the next few weeks |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
I guess all you guys that replied to my post about the multiple fuel gauge float failures think I'm some kind of pompous snob because I never posted a response.. In keeping with Liz's intentions for starting this thread, I remained in the background, as it wasn't my intentions to seek help with a solution to the problem.. I already knew what I had to do.. I want to thank each and every one of you for the solution contributions..
Now as to what I did to my truck today.... I ordered later a model fuel gauge sending unit, one with the third line intended for fuel recirculation, and a plastic float to go with it.. I broke out my trusty tubing bender and a few clothes hangers.. While I wait for the new parts to arrive, I've installed a mechanical fuel pump to replace the noisy electric unit. Also, I'll be bending up a return line.. Looks like I have enough to do for the next few days... Now back to our regularly scheduled programming.. |
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
Blasted one side today. The blaster will only do fine slag or crushed glass. Little slow on rust but takes the paint off nicely. Not a lot of heat either. Kept checking it with an infrared thermo.
But it is nice not doing any rot work. I may just paint the inside of the fenders body color. Black specks is what's left of the undercoating not rust |
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
Going to the GoodGuys Nats in Columbus, Ohio in a couple of weeks so I put my "High Tech" tool box in the bed to keep stuff dry in case of rain. I needed a way to hold it in and not wanting to over engineer it or drill holes in the pristine bed floor I came up with a couple of 1/8" by 1 1/2" straps bent 90 degrees and was able to remove two bed mounting bolts and use the holes to fasten the box down. When I decide to remove the box I can replace the original rusty headed carriage bolts.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
I found my exhaust leak!
Header installation in process... Anyone interested in a slightly used , original rams horn? Lol! |
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
Cleaned up a mess under the seat.
And ditched the stack of spacers under the seat And put in new 3 point belts from T korinek The belts went in and work perfect. |
Re: What did you do to your truck today.The 3rd chapter
Wanted to change out my steering box, but can't find it local ( I'm not paying $800). Instead I ran new rubber fuel lines and changed all the in line filters. My timing light arrives tomorrow so will check timing and maybe see if I can adjust my carb.
Back story-purchased truck from neighbor. They had it since 2015. Had plans to restore but didn't get very far. So it's mine now, so minimum 4 years of sitting. I want to restore and start cruising it. Slowly finding parts needing replaced. My back ordered heater core finally arrived after 3 months on order. Trying to get it road worthy for now. |
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Got one of my saddle tanks back on-line.
"Fixed" my ancient exhaust system replacing the manifold to pipe brass nuts and changing out the coffee cans that hold the muffler together. Replaced windshield washer hose but there is not enough pressure to squirt more than a few inches, still not bad for not having worked for 30 years. Fixed charging system (wire to Ign. Switch came loose). -BA |
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Cab and bed finally off! No turning back now, is there?
|
3 Attachment(s)
Fixing some minor safety issues. Coil spring was broken off in the control arm. Ball joint fell out of arm. Hopefully the airbags, newer control arms(68’) and new ball joints get rid of the rattling death feel. Real curious how long it’s been broken since I’ve been driving 50 miles a day last few months.
Posted via Mobile Device |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
Oh, that other "structural support" is a section of 4" plastic bender-board that i sawed a notch in with a carpenters saw. |
5 Attachment(s)
I finally stretched the tonneau cover on, I stitched up on camper. Now the bike can survive the sun. One step closer.
Posted via Mobile Device |
Re: What did you do to your truck today.The 3rd chapter
Cool!
Yesterday and today my son drove the truck to do some handy man work. He loves that truck! When my wife and I shuffle off this mortal coil, he's going to be the recipient. All my tools, too. The other two have no interest in any of that. :( |
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Painted the inner fender area on the step side. Now I'm sanding the steps and fenders hope to get it painted today.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
I removed the heart...
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Sand, sweat, get covered in dust, repeat...
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Reading all theses awsome post makes me feel bad. All I did was replace some valve cover gaskets and remover the rest of the trasmission spark control wiring.
|
Re: What did you do to your truck today.The 3rd chapter
Drove mine to Home Depot, an appointment, and to 7-11 for a soda.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
But then I start on the cab. |
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
Bed is completely painted . Now I need to get the wood installed and put it back on the truck. Never intended to make it a show truck but I need to redo one fender . Got a bug and a run. Also had to settle for a little less gloss so I could get the motling out of the paint . Lots of misting ,only problem with single stage metallic paints.
At least it's on the fender I hope to replace . Put a 67 with spare tire mount on my 68. Hope to find a real nice 68 fender. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
I guess its acceptable.
|
All times are GMT -4. The time now is 03:12 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com