Re: Do you need '64-'66 Chevy Truck Parts?
 

TX:

Good morning and thanks for the inquiry. I have the item you are looking for. This part including shipping is $40.00.

I accept cashiers check or money order at the address in my signature or PayPal at: 4-5-6chevytrucks@sbcglobal.net

Please let me know if I can help you with this item or other good, used '60-'66 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I am looking for wheel tubs for my 64 GMC ( the best set that you have ) ship to 20751.
Thanks
James

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hi, I need a 4bbl air cleaner for a 66 c20 can you help ? thanks !! Pm me also

Re: Do you need '64-'66 Chevy Truck Parts?
 

do you have patch panels?

lookin for drivers side floor panel, inner and outer rocker panel(driver side), lower rear fender panel for front fender(both sides) ext. rubber kit, window channel kit, shipped to 28083

thanks
karl

Re: Do you need '64-'66 Chevy Truck Parts?
 

James:

Good morning and sorry for my delay in responding. I have a few very nice sets of fleetside wheel tubs, that are rust-free. They are $125.00 per pair, plus $28.00 shipping, via UPS or FedEx.

Thanks for the opportunity and please let me know if I can help you with any good, used 4-5-6 Chevy truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good morning and thanks for the inquiry. I have a few good, used 4-5-6 Chevy truck factory 4-barrel air cleaners. They are $40.00, plus $12.00 shipping, via UPS or FedEx.

Thanks for the opportunity and please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Karl:

Good morning and thanks for the inquiry. I sell good, used parts for 4-5-6 Chevy trucks, so I can't help you with new patch panels or other new items. Here is a list of aftermarket truck parts suppliers, that sell items for these trucks:

www.bowtiebits.com
www.lmctruck.com
www.classicparts.com
www.oldchevytrucks.com
www.ecklerstrucks.com
www.gspp.com
www.truckandcarshop.com
www.harmons.com
www.oldmusclecars.com
www.classicchevroletparts.com
www.classicindustries.com
www.bobschevytrucks.com
www.brotherstrucks.com
www.mar-k.com
www.wheelvintiques.com
www.totallystainless.com
www.earlyclassic.com
www.horkeyswoodandparts.com
www.raybuck.com
www.americanclassic.com
www.yogisinc.com
www.rbsauto.com
www.obschevy.com
www.cheyennepickup.com
www.chevypickupparts.com

Most of them offer a free catalog and they are good reading. Welcome to the forums and thanks for the opportunity. Please let me know if I can help you with any good, used 4-5-6 Chevy truck parts in the future and good luck with your project.

Re: Do you need '64-'66 Chevy Truck Parts?
 

ok pm me how you would like the payment of $52.00 I will get this to you asap. I have paypal or will send out a m.o

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony do you have any good 350 turbo 3 speed transmisions short tails.. price??? maybe picture thanks buddy..

Re: Do you need '64-'66 Chevy Truck Parts?
 

pm sent

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony,
Do you have this clutch pedal arm linkage thing? Mine wore out... I'm not sure if it's factory though. Also, that upper linkage piece that connects to the arm also. (http://67-72chevytrucks.com/vboard/s...d.php?t=343063)

http://i82.photobucket.com/albums/j2...5/IMG_1250.jpg

thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

I received your PM and payment. Thanks for your business.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony, did my frame piece and crossmember ever ship out ?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hi, do you have a Hallander interchange booK. I am looking for a pair of wheel hubs that fit a 1962 (tapered roller bearings). I suspect they are the same as the years you deal in. If you have them I need um. Thanks Marshall

Re: Do you need '64-'66 Chevy Truck Parts?
 

Kevin:

Thanks for the follow-up. Last week was a bear...finishing up with one swap meet and getting ready for another one, so only shipped a portion of my truck parts orders last week. I will be shipping again this week, so your's will go out this week. I have to butcher a chassis for your items, so I will have a little time getting the parts cut off and packaged.

Sorry for my delay and thanks for your patience.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Im guessing you dont have a 3 speed 350 turbo transmission.. thanks anyway..

Re: Do you need '64-'66 Chevy Truck Parts?
 

I'd appreciate you just refunding my paypal. I thought you were going to ship it to me last week. I am tired of waiting. I will get the stuff locally.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Sorry I couldn't turn your parts around in five days. Refund complete. Good luck with your project.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I don't have a 350 Turbo short shaft, but if I did the shipping would be more than the tranny, so you would be better off finding one locally.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I don't Hollander Exchange manual, so I am not able to tell you if the '60-'66 are all the same. I have a set of front hubs from a '65, that have been refinished for a frame-off restoration, but we did a disk brake conversion instead. If you know for sure they will work, they are for sale.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Tony,
I'm looking for a 283 4bbl carburator and intake setup with breather. Have you got anything? Also would like to know where the best place is to get a four row desert cooler radiator for my 66?

Re: Do you need '64-'66 Chevy Truck Parts?
 

I am looking for a dash out of a 61 or similiar years. Pm me a price shipped to 35960 if you have one.

Thanks, Kade

Re: Do you need '64-'66 Chevy Truck Parts?
 

Red, how much for the hubs?

Re: Do you need '64-'66 Chevy Truck Parts?
 

I definitely went them but I have not sent the payment yet.I will send the payment this weekend.
James
just want to keep things on the up an up.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. I don't have any factory 4-barrel carb/intake setups. I have sold two 4-barrel breathers in the past few weeks, so I am out of these, as well.

Thanks for the opportunity and please keep me in mind for other good, used 4-5-6 Chevy truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

James:

Thanks for the prompt reply. I checked my notes and PayPal, but was unable to find a record of payment, so thanks for the heads-up. Let me know and I will reply accordingly. Thanks.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Kade:

Good evening and thanks for the inquiry. I have a few good, used '60-'63 Chevy truck dashes. Are you looking for the dash cluster or the entire dash assmembly, that goes from "A" pillar to "A" pillar? Please let me know and I will reply accordingly.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Bob:

I do have a few good, used factory Harrison 4-core radiators. I just had one re-cored, but it was $400.00, to do so. It looks like new and has the factory tranny line connections on the bottom tank for an automatic transmission. Also, I just purchased a 3-core from O'Reillys for around $200.00. This was after checking the offerings from LMC Truck and Classic Parts, since both are in the Kansas City area and I could visually inspect them before purchasing one. Needless to say, they say they are factory replacements, but the tanks are not even close, plus the cost was about double what I paid for the radiator from O'Reillys. If you are interested, please let me know and I will reply accordingly. Thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Are you just looking for the hubs or the entire hub assembly, including the brakes, drums, hubs and hoses? I have all of the above, so let me know what you need and I will reply accordingly. Thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I need the whole dash from pillar to pillar, I am not worried about the cluster, any of the knobs, radio, heater contols, etc but I would like to have the glove box door included. If it is not too much trouble the pedal bracket that mounts to the dash and firewall would be nice and maybe the column strap. My zip is 35960.

Thanks, Kade

Re: Do you need '64-'66 Chevy Truck Parts?
 

Ok I sent the payment this morning.
Thanks
James

Re: Do you need '64-'66 Chevy Truck Parts?
 

The place on the site to offer parts for free is under the Parts for Sale thread, by starting your own thread, if you have parts to offer for free.

After several years of being a Site Supporter, my subscription was changed to a Site Vendor, without my consent and later changed back to Site Supporter, without my knowledge, so I don't have any control over that. By the way, I am an individual with a collection of 4-5-6 Chevy trucks and in the process and collecting and restoring them, I have acquired a massive amount of parts, so I offer them for sale. I don't operate as a business, however I am in the process of making that transition, since my primary business, commercial general contracting, has been rather slow.

Thanks for your opinion on the situation and let me know if I can help you with any good, used 4-5-6 Chevy truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

No problem, I just remember you as being a vendor at one time.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony,
My wife picked me up a 66 while on deployment to the desert, however the hood is all rusted out. I am looking for hood that is in real good condition. I am also looking for the passenger side wing window assembly. I will need the complete frame and everything. I will be home in a couple weeks from deployment, and will be in Coffeyville, Ks around the 22nd of June. Any help you can give me will be greatly appreciated. If shipping is not too much my zip is 32068. Thanks for your help

Brian

Re: Do you need '64-'66 Chevy Truck Parts?
 

Parts arrived,
Thanks
James

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Tony i'm looking for a four row desert cooler radiator for my 66 k10 it is a strait drive(no trans cooler) do you have one or can i buy one new some where? I also am looking for a set of factory locking hubs i think i remember a thread where you said you had a restored set for sale.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hiya Tony,

I am looking for the license plate bracket for a 1965 Chevrolet C10 for the painted rear step side bumper.

-W

Re: Do you need '64-'66 Chevy Truck Parts?
 

Does anyone here have any contact with Tony? He was supposed to ship me some items and I have not heard from in weeks.

Re: Do you need '64-'66 Chevy Truck Parts?
 

When did you order the item?I don`t see anything in this thread.It appears he`s still shipping stuff out.Have you sent him a pm?