Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
1 Attachment(s)
thanks guys ...well had a busy weekend and didnt get much done on Square Peg other then being rewarded by my patience......and alot of friends looking and trying to help, i got a text Sunday about a motor and trans , FINALLY the deal i had been waiting for 2001 5.3 motor and trans complete all accessories and wiring , 135k miles for $500 ! Thanks to my friends Chip and Brian for tagging along on a late night engine pickup we got back home at about 11:30 last night !
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Wow, what a deal! Some poor dude is going to come outside this morning and his truck ain't gonna start because you stole that thing! (figuratively, of course).
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
LOL.....i was sure hoping that a "GREAT" deal like this would come along !
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
If my small block wasn't already at the engine builder this would have been in my blazer. Lol
Posted via Mobile Device |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
LOL, i am glad yours was at the engine shop !
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Nice score!
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Thanks man , i am pretty pumped about it !
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
nice build!
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Thank you man ! and welcome to the board !
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Smokin deal I haven't yet seen a square with a vortec motor in it so maybe ill convince my father to swap out his tired ole' smog motor in his 73
Posted via Mobile Device |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Looking forward to getting it stripped down , cleaned up , checked out. I want to run a small cam in it and a custom intake of some sort ?
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Quote:
Magnusson supercharger perhaps??? https://www.magnacharger.com/p-49-gm...ercharger.aspx :D:D:D |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Man $500.00 is a GREAT DEAL on the package for the motor and tranny and computer.
Justin |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
What are the plans for this engine, Mike? A can of gunk and freshening up, or are you going to build it up some?
*edit * n/m finally caught up. Great buy! |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
5 Attachment(s)
OH......man......WHAT A GREAT DAY ! SCOTTS you guys ROCK !
Check out the nice detail work and welds on the arms ! and they are also adustable so you can tune it in PERFECT ! The torsion sway bar is absolutely SICK ! SS bags ! |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
5 Attachment(s)
next.....Scott's IFS...this piece is BEAUTIFUL the welds and finish work are TOP NOTCH !
The 3 piece trans mount , love that ! The rear 4link SUPER SLAM !! |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
3 Attachment(s)
here is some other parts
My Scott's underdash brake pedal set up , how cool is that ! Steering knuckles |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Wow......i am pumped ! Thanks justin !
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
1 Attachment(s)
and a BIG THANK YOU TO CPP !
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Quote:
Quote:
Quote:
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Is that Wilwood piece and adjustable prop? Part number?
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Man the TIG welding is over the top! Pure BLING there!
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Quote:
Quote:
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Thanks! :barn:
Beer for ya! I think its Guiness? |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Mike, congrats on the eninge fine. A friend just picked up 2005 5.3, trans and computor with 81,000 miles for $1200, which I thought was a great deal. Your front end looks great, my son and I installed one of their units in a 32 F**d, and it looks super...Jim
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
whoa!:metal:
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Quote:
Quote:
Quote:
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Man nice stuff!......
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
5 Attachment(s)
Got the 5.3 all cleaned up and stripped down last night !
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
I cant wait to see all that frame/drivetrain come together, loving the build buddy!
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Thanks man , i am pumped also !
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
thats a real steal of an engine , i informed once about a truckversion of a 6.0 (LQ) and the guy wanted 5000 euro
sure would safe some cash to live in the states where those engines are a little more common |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Comp cams 212/218 with .522/.529 lift
LS6 valve springs 7.4" hardened push rods Easy on the wallet, mo' powah! |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Oh yeah, how on earth did you get that thing so clean?
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
probably was power washed...when I got my 5.3 it was pretty clean then we degreased and power washed it and it looked brand new.
Builds coming along good man... |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Looks great!
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Quote:
Quote:
Quote:
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Wow, that's a mess of purty parts!
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
eazy with the acid on aluminium parts it makes them turn white or darkgrey , i had that happen to a couple of aluminium trays that whent intoo a profesional washingmachine (uses caustic soda)
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Quote:
Quote:
|
All times are GMT -4. The time now is 09:00 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com