The 1947 - Present Chevrolet & GMC Truck Message Board Network - Vintage air

Page 17 of 21

« First

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Vendors Marketplace (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=195)

- - Vintage air - huge sale! (https://67-72chevytrucks.com/vboard/showthread.php?t=642573)

C10ENVY

10-14-2020 05:54 PM

Re: Vintage air - huge sale!

Quote for a lq4 ls swap 67 factory ac cab. I have no compressor or brackets

MCB Matt

10-15-2020 01:55 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by C10ENVY (Post 8822437)

Quote for a lq4 ls swap 67 factory ac cab. I have no compressor or brackets

PM on the way.
Thanks
Kim
MCBparts
925-828-5555

EricSean

10-16-2020 09:23 AM

Re: Vintage air - huge sale!

I have a 72 Blazer I'm installing a 2018 5.3 in. I'm looking at the gen IV with factory AC kit. Could I get a quote on this or even a suggestion for a better kit if you think there is a better one?

MCB Matt

10-16-2020 12:04 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by EricSean (Post 8823044)

I have a 72 Blazer I'm installing a 2018 5.3 in. I'm looking at the gen IV with factory AC kit. Could I get a quote on this or even a suggestion for a better kit if you think there is a better one?

Happy Friday!!
PM on the way.
Thanks
Kim
MCBparts

CharlieBrown

10-23-2020 05:26 PM

Re: Vintage air - huge sale!

1972..FACTORY AC..SMALLBLOCK V-8...short water pump.Want to convert factory controller...Compressor Black is fine

MCB Matt

10-26-2020 11:27 AM

Re: Vintage air - huge sale!

Quote:

Originally Posted by CharlieBrown (Post 8826245)

1972..FACTORY AC..SMALLBLOCK V-8...short water pump.Want to convert factory controller...Compressor Black is fine

Happy Monday! PM is on the way.
Thanks
Kim
MCBparts

A1971Blazer

10-27-2020 10:52 AM

Re: Vintage air - huge sale!

'67 Chevy w/o factory air with factory heater control..... also need low mount Camaro/Firebird compressor bracket kit

MCB Matt

10-27-2020 11:03 AM

Re: Vintage air - huge sale!

Quote:

Originally Posted by A1971Blazer (Post 8827909)

'67 Chevy w/o factory air with factory heater control..... also need low mount Camaro/Firebird compressor bracket kit

Pm on the way.
Thanks
Kim
MCBparts
925-828-5555

deron1

11-02-2020 02:35 PM

Re: Vintage air - huge sale!

Would like a quote for a 1970 C10 w/o factory air but with factory A/C controller (941171).

Would also like a quote on factory A/C Controller (49767-LCE).

Shipped to CA 93614

Thank you!

MCB Matt

11-02-2020 03:03 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by deron1 (Post 8830658)

Would like a quote for a 1970 C10 w/o factory air but with factory A/C controller (941171).

Would also like a quote on factory A/C Controller (49767-LCE).

Shipped to CA 93614

Thank you!

PM on the way.
Thanks
Kim
MCBparts

Desert1957

11-08-2020 12:04 PM

Re: Vintage air - huge sale!

Can I have a quote for an 87 R10 without factory air, also quote shipping to 17349. I s there currently a sale for November?

MCB Matt

11-09-2020 04:15 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by Desert1957 (Post 8833144)

Can I have a quote for an 87 R10 without factory air, also quote shipping to 17349. I s there currently a sale for November?

PM is on the way.
Thanks
Kim
MCBparts

Koor	11-09-2020 11:32 PM

Re: Vintage air - huge sale!

How about a SureFit complete kit for '53 V-8 swap?

MCB Matt

11-10-2020 01:06 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by Koor (Post 8833906)

How about a SureFit complete kit for '53 V-8 swap?

PM on the way!
Thanks
Kim
MCBparts

lil blue

11-16-2020 09:05 AM

Re: Vintage air - huge sale!

I’m looking to get a kit for my 78 c10 non ac truck with a Serpentine belt
Posted via Mobile Device

MCB Matt

11-16-2020 12:17 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by lil blue (Post 8836434)

I’m looking to get a kit for my 78 c10 non ac truck with a Serpentine belt
Posted via Mobile Device

PM on the way.
Thanks
Kim
MCBparts

RLC	11-19-2020 10:52 AM

Re: Vintage air - huge sale!

Needing the VINTAGE AIR 944170 for my 68 c10 w/factory ac. Truck has a 2003 5.3 LS set up and I need the high mount compressor bracket for that.

Thanks

MCB Matt

11-19-2020 05:00 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by RLC (Post 8837907)

Needing the VINTAGE AIR 944170 for my 68 c10 w/factory ac. Truck has a 2003 5.3 LS set up and I need the high mount compressor bracket for that.

Thanks

PM on the way.
Thanks
Kim
MCBparts
925-828-5555

hardhead

11-25-2020 10:29 AM

Re: Vintage air - huge sale!

I need a complete kit for a 74 Bronco with factory 302. Shipping to AL 36571.

MCB Matt

11-25-2020 12:05 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by hardhead (Post 8840649)

I need a complete kit for a 74 Bronco with factory 302. Shipping to AL 36571.

PM on the way.
Thanks
Kim
MCBparts

KyleSeal

11-27-2020 02:09 PM

Re: Vintage air - huge sale!

I need a quote on a Vintage Air system for a 1970 C10 without factory air.

MCB Matt

11-27-2020 03:12 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by KyleSeal (Post 8841600)

I need a quote on a Vintage Air system for a 1970 C10 without factory air.

PM on the way
Thanks
Kim
MCBparts
925-828-5555

gs1969

11-29-2020 10:51 PM

Re: Vintage air - huge sale!

I need a quote on Vintage Air system for 72 C10 with factory a/c, using 2001 5.3 LS engine

Thanks!

wesleytucker454

11-30-2020 12:26 AM

Re: Vintage air - huge sale!

I would like to get a quote on a system for a non air 1972 K10 with the factory 350. Shipped to 72802. Thank you!

MCB Matt

11-30-2020 02:04 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by wesleytucker454 (Post 8842636)

I would like to get a quote on a system for a non air 1972 K10 with the factory 350. Shipped to 72802. Thank you!

PM on the way!
Thanks
Kim
MCBparts

1972trucks

12-02-2020 12:40 PM

Re: Vintage air - huge sale!

I need a quote for a 72 c10 with small block and compressor on passenger side. I have a non air truck but have already cut the holes in dash and I have factory air controls that I want to use. Thanks

MCB Matt

12-02-2020 01:52 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by 1972trucks (Post 8843738)

I need a quote for a 72 c10 with small block and compressor on passenger side. I have a non air truck but have already cut the holes in dash and I have factory air controls that I want to use. Thanks

PM on the way.
Thanks
Kim
MCbparts
925-828-5555

gs1969

12-02-2020 09:35 PM

Re: Vintage air - huge sale!

I would like to get a quote on a Vintage Air system, a/c cab,5.3 LS engine, shipped to 66048

Thanks

MCB Matt

12-03-2020 02:48 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by gs1969 (Post 8843991)

I would like to get a quote on a Vintage Air system, a/c cab,5.3 LS engine, shipped to 66048

Thanks

PM on the way.
Thanks
Kim
MCbparts
925-828-5555

rcs72

12-18-2020 01:55 PM

Re: Vintage air - huge sale!

I would like a quote for a 1959 Chevy Apache sure fit with deluxe controls

MCB Matt

12-18-2020 02:09 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by rcs72 (Post 8851506)

I would like a quote for a 1959 Chevy Apache sure fit with deluxe controls

PM on the way
Thanks
Kim
MCBparts

OL SKOOL

12-28-2020 01:16 PM

Re: Vintage air - huge sale!

I need the vintage air for a 70 c10 350sbc does not have factory air . I already have the a/c control in the cab i purchased recently. I want the electronic control no cables. I also would like a price on seat belts flame red 3 pt. driver and passenger side. 60129 is my zip. Thank you Bob

MCB Matt

12-28-2020 01:49 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by OL SKOOL (Post 8855597)

PM on the way.
Thanks
Kim
MCBparts
925-828-5555

typerr

01-02-2021 08:26 PM

Re: Vintage air - huge sale!

Hi Matt

I'd like a quote on Vintage Air kit for a 1970 C10 with non-air cab. 350 sbc. I'd like the no cable electronic controls. I currently have an unattractive pulley setup and would like to upgrade to a polished v-belt or serpentine drive. Alternator and PS on drivers side. Please quote both to 90713. Thanks

MCB Matt

01-03-2021 07:08 PM

Re: Vintage air - huge sale!

PM on the way!
Thanks
Kim
MCbparts
925-828-5555

Quote:

Originally Posted by typerr (Post 8858193)

JJH Jimmy

01-06-2021 03:47 PM

Re: Vintage air - huge sale!

Hey Matt, I am looking for a quote for a vintage air system for a 85 K20 non AC cab shipped to 49087.

Thank you!

MCB Matt

01-06-2021 03:54 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by JJH Jimmy (Post 8859929)

Hey Matt, I am looking for a quote for a vintage air system for a 85 K20 non AC cab shipped to 49087.

Thank you!

PM on the way!
Thanks,
Kim
MCBparts

C101972

01-26-2021 06:59 AM

Hi , Can I get quote for my 1972 c10 factory air cab with a big block Chevy. I like the look of the factory controls but if you have them electronically controlled that would be awesome. Compressor mounted on passenger side but don’t need it. Thanks
Posted via Mobile Device

MCB Matt

01-26-2021 12:08 PM

Re: Vintage air - huge sale!

Quote:

Originally Posted by C101972 (Post 8870068)

PM on the way.
Thanks
Kim
MCBparts
925-828-5555

C101972

01-26-2021 12:15 PM

Quote:

Originally Posted by MCB Matt (Post 8870189)

PM on the way.
Thanks
Kim
MCBparts
925-828-5555

Hi again, What’s the part number of the kit? What are my other options for not using my controller and pricing of it.
Posted via Mobile Device

All times are GMT -4. The time now is 02:01 AM.

Page 17 of 21

« First

Show 40 post(s) from this thread on one page