![]() |
Re: What did you do to your truck today.The 3rd chapter
Quote:
At what point does an overbored 327 become a 350? |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Installed my bumper, rechromed. That's the second time it was rechromed, my mom got it for my birthday early 90s, and soon after I ruined it because the frame had the wrong brackets combined with I probably tightened the brackets first, or something else wrong:metal:
It's a rare frame, rare doesn't mean desirable, though it's a SWB. OEM brackets for this are so rare, replacements don't fit despite they saying otherwise. GMs shorter inner brackets were the closest. We modified those and the outer brackets too. For what worth, who knows if it's right...Real close good enough? The bracket rear surfaces are 8” behind the frame rails. The bumper’s top is 8/10” behind the bed’s body located below the taillight bezels, and 4/10” below the bezel’s phillips screw center. GM designed a nice product. The bumper's top outer edge and the lower side molding's top outer edge are plumb. Painter has the license plate bracket, optioned for argent silver and a clear coat. My front bumper is pending, would you believe they gave me an imposter? Yeah. I marked the original along with a difference in grains made that obvious. They "found" it and are now "rushing it". They at least texted their goof supported by lots of pictures. The imposter even has part numbers stamped on the back. Wrong numbers and unless I'm mistaken, original bumpers aren't stamped at all, they only had a GM sticker. |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Got the bench seat in today with the 3 point seat belts.
:chevy: |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Some progress has finally been made. Got the seat back from the upholstery shop
https://i.imgur.com/0fHI0dgl.jpg |
Re: What did you do to your truck today.The 3rd chapter
Quote:
Also don't you have that assbackwards? You would need a longer rod. |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Installing a vintage air front runner serpentine kit on my 496
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
Very happy with the products. :chevy: |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
After a couple more test drives to chase down a rattle and squeak,
I installed the door panels. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Installed the front bumper guards.
Thanks go to member PbFut for the advice. |
Re: What did you do to your truck today.The 3rd chapter
very nice truck.
|
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
Today made more progress on my new 327 for my truck. Got the bottom end all buttoned up and got the heads on. Im excited to see how the heads run. This motor had 69 Z/28 2.02 heads on it. Stainless valve, screw in studs, guide plates, and some very heavy port work. Should be alot more peppy than the old 350 motor in the truck currently.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
We finally got new tires and wheels on the old girl.
I never get tired of this look! |
Re: What did you do to your truck today.The 3rd chapter
Lost the farm truck ride Friday..... front stabilizer bar off of a 2500 took care of that. I kinda miss that old truck "float". No going back at this point. Gonna try dropping it >JUST< 2" all around see how I like it.
|
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
I found this nice temperature gauge in a spare cluster I had in my garage. The text is still green, and the hot range marker still has some orange to it. I plan on installing it in place of the one in my truck that is sun-bleached white, so I painted the needle.
|
Re: What did you do to your truck today.The 3rd chapter
Good job, Pat. That's exactly how I did the Speedo and Gas needles on mine. I mighta used Krylon instead, but it's the same regulation color.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Weather held off long enough today here to wheel the motor out and get it all painted. Pretty much done with it until I get the motor and trans out of the truck to start swapping stuff over.
|
All times are GMT -4. The time now is 04:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com