The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today.The 3rd chapter (https://67-72chevytrucks.com/vboard/showthread.php?t=773345)

CAMAROBOY68SS 10-27-2023 08:56 PM

Re: What did you do to your truck today.The 3rd chapter
 
5 Attachment(s)
Started pulling the motor out of the truck today. Got the 4 speed out and got prepped to yank the motor tomorrow. Then onto detailing the engine bay again and getting the new 327 and 5 speed prepped.

pjmoreland 10-27-2023 09:04 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by CAMAROBOY68SS (Post 9254247)
Started pulling the motor out of the truck today. Got the 4 speed out and got prepped to yank the motor tomorrow. Then onto detailing the engine bay again and getting the new 327 and 5 speed prepped.

Alright!!

samkost 10-27-2023 09:38 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by CAMAROBOY68SS (Post 9254247)
Started pulling the motor out of the truck today. Got the 4 speed out and got prepped to yank the motor tomorrow. Then onto detailing the engine bay again and getting the new 327 and 5 speed prepped.

I just spent the last several minutes staring ………………….at your truck. :lol:

“Staring”
Staring is a prolonged gaze or fixed look.
In staring, one object or person is the continual focus of visual interest, for an amount of time“

That’s one sharp object. :metal:

CAMAROBOY68SS 10-28-2023 10:06 PM

Re: What did you do to your truck today.The 3rd chapter
 
5 Attachment(s)
Got the 350 out today and cleaned a few things up and now moving onto swapping stuff over to the 327 and doing some measurements for the new TKX 5 speed.

'68OrangeSunshine 10-29-2023 12:21 AM

Re: What did you do to your truck today.The 3rd chapter
 
I love them Orange color engines

Jiggers72-GMC 10-29-2023 08:50 AM

Re: What did you do to your truck today.The 3rd chapter
 
Great work Cboy, that's the first time I see a ballast resister on these trucks ...........

tim_mc 10-29-2023 09:02 AM

Re: What did you do to your truck today.The 3rd chapter
 
Nice to see the progress on your '68 - beautiful truck. Small project for me yesterday. I swapped out my OEM-style starter to a Powermaster 9112 hoping to solve a heat soak issue. Wow - wish I would have gone with a high torque starter sooner. Keep the pics coming!

CAMAROBOY68SS 10-29-2023 10:15 AM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Jiggers72-GMC (Post 9254582)
Great work Cboy, that's the first time I see a ballast resister on these trucks ...........

Its there because I un converted the truck from HEI back to points. The previous owner put HEI in and cut the original resistance wire out of the harness. So the resistor is there to be the replacement. Ive been looking locally for a old harness that someone ripped out to just get that wire to swap back in and remove the ballast but no luck so far.

LNP 10-29-2023 01:19 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by CAMAROBOY68SS (Post 9254610)
Its there because I un converted the truck from HEI back to points. The previous owner put HEI in and cut the original resistance wire out of the harness. So the resistor is there to be the replacement. Ive been looking locally for a old harness that someone ripped out to just get that wire to swap back in and remove the ballast but no luck so far.

You can buy resistor wire and just put it back in the harness. Just look for automotive ignition resistor wire.

67C10Step 10-30-2023 02:48 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Quote:

Originally Posted by CAMAROBOY68SS (Post 9254610)
Its there because I un converted the truck from HEI back to points. The previous owner put HEI in and cut the original resistance wire out of the harness. So the resistor is there to be the replacement. Ive been looking locally for a old harness that someone ripped out to just get that wire to swap back in and remove the ballast but no luck so far.

I removed the resistor wire from my 67 all the way back and removed the connector from the bulkhead. One would only have to snap it back in and, knowing me, it is probably coiled up and stashed on one of my boxes of truck stuff. I'd be happy to dig it out if you want it.
I am finishing up an intake reseal, new radiator, new timing gear/chain set, and new alternator install. This photo was before I pulled the carb apart, gave it a run through the ultrasonic cleaner, and reinstalled. Now I have a fuel leak at the fuel pump that I guess monkeying around with the fuel line caused. This is the fun stuff right?
Still need to repaint the oil filler cap as now it stands out with everything else cleaned up.

Rust_never_sleeps 10-31-2023 06:18 PM

Re: What did you do to your truck today.The 3rd chapter
 
New rear shocks. OEM Spectrum, nothing fancy. For once, things went pretty much as expected ;-)
Spec is for 75#, but there is no way the existing ones were nearly that tight. :shrug:

CAMAROBOY68SS 11-04-2023 10:05 AM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 67C10Step (Post 9254934)
I removed the resistor wire from my 67 all the way back and removed the connector from the bulkhead. One would only have to snap it back in and, knowing me, it is probably coiled up and stashed on one of my boxes of truck stuff. I'd be happy to dig it out if you want it.
I am finishing up an intake reseal, new radiator, new timing gear/chain set, and new alternator install. This photo was before I pulled the carb apart, gave it a run through the ultrasonic cleaner, and reinstalled. Now I have a fuel leak at the fuel pump that I guess monkeying around with the fuel line caused. This is the fun stuff right?
Still need to repaint the oil filler cap as now it stands out with everything else cleaned up.

Yeah I would be interested in that wire if you still got it. Just shoot me a message if you still got it.

CAMAROBOY68SS 11-04-2023 10:13 AM

Re: What did you do to your truck today.The 3rd chapter
 
3 Attachment(s)
Making some more progress. Got the offset dowel pins in and the got the final runout ran and all set for the tremec. Then got the new clutch installed.
Also this past week got all the stuff being moved over from the 350 to the 327. Just a little more cleanup in the engine bay and this motor will be ready to drop back in to the truck.

TxGary 11-04-2023 06:32 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Installed the TC boot ring retainer that I bought from board member A1971Blazer. Very nice piece.

'68OrangeSunshine 11-04-2023 07:27 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by TxGary (Post 9256320)
Installed the TC boot ring retainer that I bought from board member A1971Blazer. Very nice piece.

Nice. But does he do one with GMC instead of the Bowtie?
Asking for a friend with a Jimmy.

3757chevy 11-04-2023 07:58 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by TxGary (Post 9256320)
Installed the TC boot ring retainer that I bought from board member A1971Blazer. Very nice piece.

Very nice .

TxGary 11-04-2023 08:19 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by '68OrangeSunshine (Post 9256332)
Nice. But does he do one with GMC instead of the Bowtie?
Asking for a friend with a Jimmy.

Yes, he has them posted under blazer & suburban stuff.

'68OrangeSunshine 11-04-2023 08:40 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by TxGary (Post 9256354)
Yes, he has them posted under blazer & suburban stuff.

Cool. Thanks.
:gmc2:

CAMAROBOY68SS 11-05-2023 09:26 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Got the 327 back into the truck today. Now to start getting the tremec fitted and everything back onto the motor. Another week or two and it should be running again.

Extended Power 11-05-2023 10:02 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Making headway on more wiring.
Electric fans, Lokar kick down, MSD-6AL2, Vintage Air, and MSD HVC II coil all wired up.
Sorry, no idea how to flip picture.

Rich72C10 11-05-2023 10:10 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Quote:

Originally Posted by Extended Power (Post 9256710)
Making headway on more wiring.
Electric fans, Lokar kick down, MSD-6AL2, Vintage Air, and MSD HVC II coil all wired up.
Sorry, no idea how to flip picture.

I do, so Flipped!

Extended Power 11-05-2023 10:27 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Rich72C10 (Post 9256712)
I do, so Flipped!

Thank you! :metal:

allchevy58 11-05-2023 11:36 PM

Re: What did you do to your truck today.The 3rd chapter
 
3 Attachment(s)
Last Monday had LineX sprayed in the bed.

Jiggers72-GMC 11-06-2023 08:21 AM

Re: What did you do to your truck today.The 3rd chapter
 
Nice job on the Line-ex, great work truckers

3757chevy 11-07-2023 12:07 AM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by allchevy58 (Post 9256734)
Last Monday had LineX sprayed in the bed.

Very nice . Good job on color match.


All times are GMT -4. The time now is 05:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com