Re: What did you do to your truck today.The 3rd chapter
 

You got your wife in the garage covered up? :eek:

Re: What did you do to your truck today.The 3rd chapter
 

Left rust remover on over night. Cleaned it off and wiped it down with acetone. I put rust oleum rubberized undercoating on wheel wells. I brush painted the rest with rust oleum satin black. Looks way better and should keep this old truck box around for many years.

Re: What did you do to your truck today.The 3rd chapter
 

Wife and I went to a local cruise in. Another truck owner showed up, but in his really nice Camaro.

Re: What did you do to your truck today.The 3rd chapter
 

Drove up to East Texas Monday to my brother's shop. Pulling the fenders, so much fun! I'm installing the missing Hinge Pillar to Fender Seals and badging my Truck as Super (all the other Super bits have been done, including new SPID).

I should be done today and the truck back together. My brother pushed me to do the passenger's side first, as it has a bit more stuff to deal with around the fender area (battery, power bits, charcoal canister). I think he was right and the driver's side should be a snap (famous last works LOL).

https://67-72chevytrucks.com/vboard/...1&d=1700592544

https://67-72chevytrucks.com/vboard/...1&d=1700594561

https://67-72chevytrucks.com/vboard/...1&d=1700600849

Re: What did you do to your truck today.The 3rd chapter
 

Happy birthday to me - ordered and received one of the new 16" Billet Muscle steering wheels from Forever Sharp. The 14" wheel just looks a little small to me installed - now waiting on the front adapter and horn assembly for it to post photos..

Re: What did you do to your truck today.The 3rd chapter
 

Hinge Pillar to Fender Seal & Super Badge install completed - so happy to have the truck back together. While it wasn't a quick job, it wasn't what I call a hard job. Though being in my brother's shop with a LOT of room and any tool that I could possibly need allowed for a near stress free time! Plus speeding time with my brother and his family made it a bit of fun ;-)

https://67-72chevytrucks.com/vboard/...1&d=1700703117

https://67-72chevytrucks.com/vboard/...1&d=1700703135

Re: What did you do to your truck today.The 3rd chapter
 

Hinge Pillar to Fender Seal & Super Badge install completed - so happy to have the truck back together. While it wasn't a quick job, it wasn't what I call a hard job. Though being in my brother's shop with a LOT of room and any tool that I could possibly need allow a near stress free time! Plus speeding time with my brother and his family made it a bit of fun ;-)

https://67-72chevytrucks.com/vboard/...1&d=1700703117

https://67-72chevytrucks.com/vboard/...1&d=1700703135

Re: What did you do to your truck today.The 3rd chapter
 

It does look SUPER!

Re: What did you do to your truck today.The 3rd chapter
 

Got the U bolts cut off, got the trailing arms out, got the track bar out, working on getting the upper spring brackets unbolted.
Have new bushings for trailing arms and a new track bar.

Re: What did you do to your truck today.The 3rd chapter
 

Made a custom aluminum panel for the Dakota Digital AC controller for my dash using the stock temperature controller.
I tried to find a stock used controller before I cut up my brand new one, but...no dice.
So, I cut up my new stock temperature controller to make this panel which has a power switch on each side. One for the electric fan bypass, and one for the 2-step.

Re: What did you do to your truck today.The 3rd chapter
 

A lot easier with the bed out of the way.:metal:

Re: What did you do to your truck today.The 3rd chapter
 

Very Nice.

Re: What did you do to your truck today.The 3rd chapter
 

Wire wheeled, rust proofed, wiped down with acetone, and brushed with rust oleum satin black. Have to clean and paint 12 bolt, put new bushings in trailing arms, and wait for new springs.

Re: What did you do to your truck today.The 3rd chapter
 

Finished my climate hoses. It wasn't an entirely linear process ;-)
Need a new defroster lever, wiper switch, glovebox liner, and a speaker before I can button it back up. ;-)

Looks like that new guy was pretty excited with the seam sealer gun. Here we see stalactites!

Re: What did you do to your truck today.The 3rd chapter
 

:haha: :haha: :haha:

Re: What did you do to your truck today.The 3rd chapter
 

Wire brushed and painted the rear end. Now just waiting on parts to re assembly everything

Re: What did you do to your truck today.The 3rd chapter
 

New dash pad. For once, I timed this right, because it's a ton easier with the instrument cluster and glovebox out. Previous guy didn't even put nuts on those middle 3 bolts.
Included a pic of the QA tag from the previous pad. Probably not original, but it did have the steel shell inside the foam

Re: What did you do to your truck today.The 3rd chapter
 

The BEST color in today's two stage paint. Love this

Re: What did you do to your truck today.The 3rd chapter
 

You're doing a great job. It's looking great!

Re: What did you do to your truck today.The 3rd chapter
 

Took a few minutes and fixed my horn that stop functioning, front driver parking light and front driver side marker light. Loose wire, unplugged connector and burned out bulb, in that order.

Re: What did you do to your truck today.The 3rd chapter
 

Over the weekend finally took the truck out onto the highway with the new motor and 5 speed. Ran perfect and man I should have done the tremec when I initially built the truck. What a difference.

Re: What did you do to your truck today.The 3rd chapter
 

I really need to invest in an air hammer. Spent the weekend grinding and punching out rivets on the frame cross members that I don't need anymore.

Re: What did you do to your truck today.The 3rd chapter
 

That's awesome! Can't wait to see it next season!

Re: What did you do to your truck today.The 3rd chapter
 

Made a few more baby steps with the exhaust on my ‘70. Waiting for another straight (4’) and pie cuts to show up so I can tackle the passenger side tailpipe.

Re: What did you do to your truck today.The 3rd chapter
 

Very nice looking! Which mufflers are those?