Re: finally come
lOOKS GOOD !!!
|
Re: finally come
1 Attachment(s)
just dialed in my mig welder
|
Re: finally come
1 Attachment(s)
back side
|
Re: finally come
Something to be said about 100% penetration!
WooHoo Looks Good |
Re: finally come
Quote:
|
Re: finally come
Quote:
|
Re: finally come
you need to hammer & dolly the weld as you go ! got to the -metalmeet .com or allmetalshaping sites -lots of help available there -you do have to dig in the archives a bit ?? good luck !! mike
|
Re: finally come
Quote:
|
Re: finally come
Well that's a great start.
|
Re: finally come
remember -yoiu might use some weld thru primer -inside that 1/4 -or leave a spot on the back side for access for undercoat or something in there or it will rust real quick when the outside is finished ?? there should be lots of info on the 2 metal sites i mentioned - it would also be easier if the body is on a positioner for welding ?? im about ready to start on my 59 napco carry all ,lots of the same welding spots to be done !!
|
Re: finally come
Quote:
|
Re: finally come
Looks good, nice job.
|
Re: finally come
I guess I need some more adjustments to mine. Type of welder, settings?
|
Re: finally come
1 Attachment(s)
Quote:
|
Re: finally come
If your gas less it will be flux core wire.
|
Re: finally come
Quote:
|
Re: finally come
1 Attachment(s)
Quote:
|
Re: finally come
Thanks Pimpston65. I'm using gas on Lincoln 135, setting B(from A,B,C,D) and number 3 (out of 10). Next time out I'll take it down to 2 and see. Thanks.
|
Re: finally come
1 Attachment(s)
might be a bit a overkill, but i had the lift jig remade in steel. i also made it a tandem. now i use 2 hoists instead of one.
|
Re: finally come
Quote:
|
Re: finally come
2 Attachment(s)
i must be lucky. found the rear cab support from desert valley auto parts. they cut it out,boxed and shipped for $250 btw the rear cab support is different then the pickups, so thats why i say i was lucky to find one not rusted away!!!
|
Re: finally come
Score!!!
|
Re: finally come
Quote:
|
Re: finally come
Can't turn back now. Instead of pimpstone65 we'll have to call you pimpdoc
|
Re: finally come
Quote:
|
All times are GMT -4. The time now is 02:48 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com