Re: Post Pics of your Static Drops!!
|
Re: Post Pics of your Static Drops!!
1 Attachment(s)
|
Re: Post Pics of your Static Drops!!
Hey neighbor, cool truck! Hard to tell on my phone, but looks like a 8 lug truck. I just picked up a 62 3/4 ton. What did you do to drop it up front?
|
Re: Post Pics of your Static Drops!!
Whats up fellow Chucktown trucker! yes sir, its a 62 c20 3/4 tone 8 lug, i cranked down the front torsion bars and let that big girl ride lol
|
Re: Post Pics of your Static Drops!!
Quote:
|
1 Attachment(s)
The orange truck has drop spindles w 2" springs in front c notch 5" springs and 1" blocks in back
Posted via Mobile Device |
Re: Post Pics of your Static Drops!!
2 Attachment(s)
Here's mine. 2 1/2 Drop springs in front and 4 inch in the back.
|
Re: Post Pics of your Static Drops!!
1 Attachment(s)
Pulled the 2/3 drop out in favor of a 5.5/7 drop. 3" front springs with 2.5" spindles, 5" rear springs with 2" blocks sitting on 235/75r15s
|
Re: Post Pics of your Static Drops!!
Looking good!
|
Re: Post Pics of your Static Drops!!
1 Attachment(s)
|
Re: Post Pics of your Static Drops!!
Does your axle bottom out or do you have a notch?
Quote:
|
Re: Post Pics of your Static Drops!!
Quote:
|
Re: Post Pics of your Static Drops!!
Here's my 66. 2" drop spindle 2" inch drop coil in front 4" drop springs and 2" block on rear[IMG]http://i350.photobucket.com/albums/q...psyruqycea.jpg[/IMG]
|
1 Attachment(s)
6 cylinder springs cut 1 coil cpp drop spindles in front, c notch 5" drop springs 1 1/2" blocks out back
Posted via Mobile Device |
Re: Post Pics of your Static Drops!!
1 Attachment(s)
Would anyone like to have a guess if my truck has been lowered or changed at all?
It's got a small rake and standard spindles etc (running 4x drums). How do I tell if it has lowered springs? As I'd like to lower it a little bit more in the near future. Rolling on 255/70/15 tires |
Re: Post Pics of your Static Drops!!
Only guessing from the photo I would say no.
Quote:
|
Re: Post Pics of your Static Drops!!
Quote:
|
Re: Post Pics of your Static Drops!!
To me it looks like it has a small rake. It might be dropped 2" in front.
|
Re: Post Pics of your Static Drops!!
x2
|
Re: Post Pics of your Static Drops!!
Thanks fellas. Looking to tackle the suspension in the next few months.
And with me being so far away in New Zealand, kind of need to get it right first time as it's expensive shipping down here! haha |
Re: Post Pics of your Static Drops!!
2 Attachment(s)
Before and after pics.
CPP 2 1/2" dropped spindles and 2" dropped coils in front. CPP 4" dropped coils in rear. |
Re: Post Pics of your Static Drops!!
1 Attachment(s)
|
Re: Post Pics of your Static Drops!!
1 Attachment(s)
here`s is my 63 c10 in the spring.
|
Re: Post Pics of your Static Drops!!
2 Attachment(s)
Here's my drop, 2.5" drop spindle and 2" coil drop up front. Back is 4" lower coils. Pretty much offsets the large 22" rims. Sits more or less stock height of 31" to the fender.
|
Re: Post Pics of your Static Drops!!
1 Attachment(s)
Attachment 1637637 4 1/2, 6
|
All times are GMT -4. The time now is 12:04 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com