Re: project INCREDIBLE HULK 6.2L with 6L80E
 

nice work Don!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Don, no hurry and whenever possible would you mind taking a picture from directly behind the bed with the tail gate down. I just wanna an idea (view) of how fat the tubs are. thanks! Gr8 work!!!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

You must Eat Sleep Dream about how to do some of these trucks good work .D :mm:

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Nice work on the wheel tubs, welding up the seam and rounding the corners really finished it off nice.

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

great build so far love what you have done, ???? for you are you going to remove the factory climb of the roof on the cab?

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Looks even better in person! the pics just dont do it justice!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Any updates Don?

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

ok im back with some updates... my camara broke awhile back and i just now got another camara...so here is what im working on now....
we got some bear claw style latches for the door, and i smoothed the door and door pillar....installed the latches and the striker bolt... it looks and functions 100 times better then stock form.....also got some power windows....
http://i25.photobucket.com/albums/c8...k/P9220011.jpg
http://i25.photobucket.com/albums/c8...k/P9220012.jpg
http://i25.photobucket.com/albums/c8...k/P9220013.jpg
http://i25.photobucket.com/albums/c8...k/P9220014.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

I'm Jealous!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Lookin good.

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Looks good...any pictures of the inside of the door so I can see what you did with that round hump that runs around the outside of the door? Thanks. Are those powered bear claws? And have you tested them with glass in the door (additional weight)? Are you running an additional manual popper anywhere (I was told I needed to)?

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Looking good Don!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

i can get pics of the inside for ya....yes they are power latches....yes, i did install the glass, for fitment/position of the latches and solinoid... i dont plan on useing any popers, i think the door seals will do that job fine...

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Thanks for the info...looking forward to the pictures. I am going to use the newer press in style weatherstrip so I'm not sure if that will be looser or tighter than normal weatherstrip so I have a set of poppers just in case they don't open enough.

If you end up needing a set of poppers I got two accidentally so let me know and I'll sell them to you for what I paid. THey're nice aluminum adjustable ones (non-power)

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

CRAZY SKILLS! I finally got through the whole thread. Its just amazing how far you have came from start to now. I know you have a ton of hours on this ride......any clue how much $$$ are tied up in it? That power plant alone must have cost some bucks! Keep it up fellow Okie.

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

time for a little update, the rear suspension had to be removed, because we're going with a diffrent set-up, one that matches the front...so the new ECE trailing arms, and xmember were removed and sold..also here are the pics of the inside door latch as requested (hope this helps).....
http://i25.photobucket.com/albums/c8...k/P9280009.jpg
http://i25.photobucket.com/albums/c8...k/P9280010.jpg
http://i25.photobucket.com/albums/c8...k/P9290012.jpg
http://i25.photobucket.com/albums/c8...k/P9280002.jpg
http://i25.photobucket.com/albums/c8...k/P9280003.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Don, the truck is starting to come along good, really like the bear claw latches, that is something that i am gonnna do to mine yet, are you shaving the handles and locks also, what kind of solenoids are you using to release the latches? THANKS James

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Skills you do have, nice work...

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

damn, how the hell did i miss this build. great project man, truck looks good!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Where at in tulsa are you picking up these fine motors?

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

while the rear suspension is all apart, i took the opertunity to weld on a drain and fill port on the rear end....this has to be one (of many) dumb things ford did, make the 9" so that you must remove the wheels, brakes, axles, and thirdmember, just to change the rear end fluid...that is just dumb planning IMO...
http://i25.photobucket.com/albums/c8...k/PA160016.jpg
http://i25.photobucket.com/albums/c8...k/PA160017.jpg
http://i25.photobucket.com/albums/c8...k/PA160018.jpg
http://i25.photobucket.com/albums/c8...k/PA170001.jpg
http://i25.photobucket.com/albums/c8...k/PA170002.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

don't hit anything with that drain while driving, that would leave a mess... are you gonna put a guard on it?

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

i dont think that'll be a problem.... ill have to see what its gonna look like with the new suspension, but im sure it'll be fine. if not ill make it flush

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Are you going with a 4 link on the rear now?

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

from the brackets he has on it im assuming hes using trailing arms