Re: LS swappers, post up your pics!!
 

Really really nice. Love the L92 engine cover, no unnecessary wires, and the Chevy orange. I plan to do mine similarly. Thanks for the ideas!

Re: LS swappers, post up your pics!!
 

Did you have to run a high hump or anything to run the 80e?

Re: LS swappers, post up your pics!!
 

What kit did you buy for the fuel system?i have only been able to find the setup with the fpr that only goes to 15psi

Re: LS swappers, post up your pics!!
 

As it sits right now.....

http://i65.tinypic.com/o5zxg7.jpg
http://i64.tinypic.com/2ic357n.jpg

Re: LS swappers, post up your pics!!
 

Progress update on my swap!

Re: LS swappers, post up your pics!!
 

2006 6.0 w/ 4L80E trans putting in my 1971 SWB C-10

Re: LS swappers, post up your pics!!
 

My work in progress. 2002 lq4 into a 79 Blazer. Still have a long way to go.
http://67-72chevytrucks.com/vboard/s...d.php?t=765788

Re: LS swappers, post up your pics!!
 

62 LBFS LQ4/4L80E, with torsion bars still in place-

Re: LS swappers, post up your pics!!
 

Hey 67chevySupercharged, what kind of mods were required on the headers with the 4l80? I read somewhere with the 4l80, the Doug Thorley headers needed some grinding?
Thanks-
Doug

Re: LS swappers, post up your pics!!
 

Here's mine as it sits right now. 2003 6.0. 4L80E. Where's everyone getting their trans cooler lines and power steering lines and fittings. I'm running a mustang power rack and my radiator has a built in trans cooler

Re: LS swappers, post up your pics!!
 

Looks like were running the same rack anemic pinion. Where did you get your power steering lines?

Re: LS swappers, post up your pics!!
 

I had the pressure side line made locally at a hydraulic hose supply house. The return line I just used what was existing (truck had ps when I bought it).
DP

Re: LS swappers, post up your pics!!
 

just finish my 5.3 swap in my 72 c10. Just getting started on my engine coverAttachment 1808702

Re: LS swappers, post up your pics!!
 

my 4.8 swapped 50 suburban.Attachment 1808711

Re: LS swappers, post up your pics!!
 

That looks great! What did you do for steering column and linkage? Did you recess the firewall at all? I'd love to see a few pictures of your steering linkage and radiator fan and shroud.

Re: LS swappers, post up your pics!!
 

Which engine mounts did you use?

Re: LS swappers, post up your pics!!
 

here some pics 77 gm van column. 71 camaro clipped and no i didin't recess the firewall

Attachment 1808997

Attachment 1808998

Attachment 1808999

Re: LS swappers, post up your pics!!
 

Just finished mine up , little more tuning left to do Glad to be driving it again I started ls swap in April but ended up pulling cab and replacing floor and repaired all other rusted areas.

Re: LS swappers, post up your pics!!
 

So far to go, but excited about the progress.

Re: LS swappers, post up your pics!!
 

She's DONE !!!

Are those valve covers painted or powdercoated?
Posted via Mobile Device

Re: LS swappers, post up your pics!!
 

they are the Holley tall covers bought in raw finish and then painted them.

Re: LS swappers, post up your pics!!
 

What paint did you use?
:chevy:

Re: LS swappers, post up your pics!!
 

Duplicolor DE1620 Engine Enamel Paint, Chevrolet Orange

Re: LS swappers, post up your pics!!
 

My 67 GMC 4.8 cammed.A real G machine.

Re: LS swappers, post up your pics!!
 

Finally got this little 5.3 almost ready to stab:

Re: LS swappers, post up your pics!!
 

What type of engine paint did you use?

Re: LS swappers, post up your pics!!
 

It’s Seymour EN-48. The valve covers were wet-sanded and polished. It sprays very thin, so multiple layers are needed, and cures slowly, but seems durable so far

Re: LS swappers, post up your pics!!
 

Did you clearcoat as well?

Re: LS swappers, post up your pics!!
 

No clear, straight single stage acrylic enamel

Which alternator and power steering brackets are those? Looks like a 2010+ LS3 Camaro pump? Are you sure the pressures of that pump will match the needs of the C10 steering box?
Posted via Mobile Device

Re: LS swappers, post up your pics!!
 

They are from ICT Billet, using 1998-2002 Camaro/Firebird pump and alternator. Not sure on the truck box, as I’m running rack and pinion with the Porterbuilt Dropmember. I have seen guys use the type II GM pump, which I understand was designed for higher pressures

Re: LS swappers, post up your pics!!
 

Is that the Delmo kit you're using for the throttle body? Do you plan to use MAF or go SD?

Re: LS swappers, post up your pics!!
 

I’m too cheap for Delmo’s stuff, though it is very nice. The adapter I bought on eBay off of a guy in Australia, but it looks like Holley now sells them for ~$120. I’ll be using Fitech to run the engine, so SD for me

Re: LS swappers, post up your pics!!
 

Attachment 1887471

5.3 in 84 C10

Re: LS swappers, post up your pics!!
 

http://67-72chevytrucks.com/gallery/...5_23_12_45.jpg
Here's my 2016 6.0L swap in my 71 C/10. Finished it in late 2017, early 2018.

Re: LS swappers, post up your pics!!
 

Which paint or powdercoat is that and which coil covers?

Re: LS swappers, post up your pics!!
 

Re: LS swappers, post up your pics!!
 

Looks great Mark...

Re: LS swappers, post up your pics!!
 

It's just dupli-color chevy orange-red #DE1607 from a local parts store. The coil covers are the Holley big block style covers. They were painted black, then masked using a set of decals that go on the script SBC valve covers, painted orange, then decals removed, then cleared over.