![]() |
Re: The '67 Burb Build Thread
hahaha sounds like we got a funny guy on our hands ;)
|
Re: The '67 Burb Build Thread
:lol: hey I was only offering sides I'm unsure about bagging my own at this point it rides okay ish but drivetrain is my own main concern at this point
Posted via Mobile Device |
Re: The '67 Burb Build Thread
i know, im still far from mine being bagged the way i want it and how i want it to ride, but it dont ride bad just need to add some shocks up front lol. drive train will be after i get all the suspension done
|
Re: The '67 Burb Build Thread
Back at it huh? GOOOOODDDDD
Quote:
|
Re: The '67 Burb Build Thread
yes sir you bet, got some porterbuilt, and some air ride tech stuff thats gonna get installed when i get beck home if i have enough time to get it all done :D
Posted via Mobile Device |
Re: The '67 Burb Build Thread
Looking good
|
Re: The '67 Burb Build Thread
thanks, yours is coming out pretty sick as well
Posted via Mobile Device |
Re: The '67 Burb Build Thread
gonna be getting in on the slosh tubz goodness :D
|
Re: The '67 Burb Build Thread
its official, just paid for my slosh tubz (thanks Mike Losh), now i gotta wait for them arive and for me to get home so i can install them along with a bunch of other goodies i got waiting.... its also official that im the second burb to run a set of them, Dennis Bruin is #1. and both burbs are also in sunny So. Cal. which in my book is also a plus :D
|
Re: The '67 Burb Build Thread
I need to get me a set of those too.
|
Re: The '67 Burb Build Thread
do it, im sure you wont be disappointed. and you can be the 3rd burb to run them :)
Posted via Mobile Device |
Re: The '67 Burb Build Thread
Wish i had the coin..those things are nice !
Posted via Mobile Device |
Re: The '67 Burb Build Thread
haha yah man they sure are. and that was almost a full weeks pay for me to buy them :(, BUT it will be worth it in the end...
|
Re: The '67 Burb Build Thread
absolutely worth it...cleans up a lot under the hood
|
Re: The '67 Burb Build Thread
yes they sure do, now to figure out what to do for the battery/battery tray since they might not work with the original one... hmmm lol. wanna keep it under the hood for ease of access. guess i got some deciding to do haha
Posted via Mobile Device |
Re: The '67 Burb Build Thread
5 Attachment(s)
porterbuilt trans and trailing arm crossmember installed :metal:
Attachment 989601 Attachment 989602 Attachment 989603 Attachment 989604 Attachment 989605 |
Re: The '67 Burb Build Thread
1 Attachment(s)
|
Re: The '67 Burb Build Thread
more work less computer :lol: I'm stalking I know okay get back to work I'll leave ya alone
|
Re: The '67 Burb Build Thread
lol. its going back into storage again tomorrow morning as i have to do some running around and work on my other truck before i go back to work on saturday... then when i get back next home time i will do some more work on it as well.
oh! and i hooked up my air horn as well. need to either change the valve with one that can handle 200 psi or regulate it down for just the horn because the valve wont open with the 200 psi :lol: |
Re: The '67 Burb Build Thread
Quote:
|
Re: The '67 Burb Build Thread
thanks. and well, the easiest thing to do and what we did. was we basically just cut out the old one to get to the rivets on top... only thing wrong with this set up is it hits the floor so you are going to need to do some massaging of the floor area above it (can be seen in 1st and 2nd pic) we just used a trans jack to push up the floor to get it in their :lol: i will eventually do something for more clearance, if new body bushings wont fix the touching issue of it hitting the floor
|
Re: The '67 Burb Build Thread
Good call on the body bushings. Mine are definitely original and TOAST. I have the Energy Suspension ones here and ready to go, so I too will be curious if this eliminates the clearance issue or not. Thanks, as always, for the help!!!
|
Re: The '67 Burb Build Thread
Quote:
|
Re: The '67 Burb Build Thread
haha thanks, and yes ALL bolts/nuts were tightened ;)
|
Re: The '67 Burb Build Thread
Bought some more small parts for the burb yesterday.... another tach (in dash mount), a lokar auto column shift linkage, a dimmer switch hippie foot pedal to match my gas pedal, and some 3" to 2.5" tapered exhaust reducers for when i redo the exhaust on it and my other truck
Posted via Mobile Device |
Re: The '67 Burb Build Thread
4 Attachment(s)
bought some stuff on ebay for the burb a little bit ago...
ammo "battery" box Attachment 1004440 Attachment 1004441 Attachment 1004442 and an M4 rifle "hood prop" :D Attachment 1004443 |
Re: The '67 Burb Build Thread
should also be pulling the trigger on some more porterbuilt parts in about another week or so, so stay tuned to here what i get lol :metal:
|
Re: The '67 Burb Build Thread
booyah! can't wait for it
|
Re: The '67 Burb Build Thread
Quote:
|
Re: The '67 Burb Build Thread
haha nope, definitely cant :)
|
Re: The '67 Burb Build Thread
love your burb it makes me want one just a lil bit more, but i have to stick to my guns and finish my truck lol
|
Re: The '67 Burb Build Thread
Thanks, and yah i gotta do the same lol
Posted via Mobile Device |
Re: The '67 Burb Build Thread
5 Attachment(s)
fully functional M4 hood prop
Attachment 1016183 ammo can battery box Attachment 1016184 Attachment 1016185 nos bumper guards Attachment 1016186 Attachment 1016187 |
Re: The '67 Burb Build Thread
5 Attachment(s)
Attachment 1016188
Attachment 1016189 exhaust reducers Attachment 1016190 steel to start framing up a rear floor Attachment 1016191 gas tank removed Attachment 1016192 |
Re: The '67 Burb Build Thread
5 Attachment(s)
Attachment 1016194
making the mounts for the gas tank Attachment 1016195 Attachment 1016196 Attachment 1016197 Attachment 1016198 |
Re: The '67 Burb Build Thread
3 Attachment(s)
Attachment 1016200
gas tank installed Attachment 1016201 layed out in front of my sierra Attachment 1016202 |
Re: The '67 Burb Build Thread
2 Attachment(s)
from yesterday....
added a few extra pieces of square tube to box in the top and make it stronger Attachment 1018544 2.5- 1lb rolls of welding wire, 7.25- 6ft sticks of 1.25" square tube, a bunch of cutting & fitting, a bunch welding, and this how far i made it framing up a steel floor for the back of my suburban. need to get some more wire and steel when i come back home in 6-7 weeks so i can do some more of framing up of the floor lol Attachment 1018545 |
Re: The '67 Burb Build Thread
Looks good.
Posted via Mobile Device |
Re: The '67 Burb Build Thread
Wow! Looking great!!!
|
Re: The '67 Burb Build Thread
Thanks guys :)
Posted via Mobile Device |
All times are GMT -4. The time now is 12:57 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com