Re: ''Project '64 SYT Super Yenko Truck"
well ill make a vid tomorrow
|
Re: ''Project '64 SYT Super Yenko Truck"
through the mufflers dude. :lol:
|
Re: ''Project '64 SYT Super Yenko Truck"
why
open headers sound so much better |
Re: ''Project '64 SYT Super Yenko Truck"
I won't be able to tell anything your engine and carb brother ...........
|
Re: ''Project '64 SYT Super Yenko Truck"
haha i know
im just kidding so might talk my dad into getting me a 650 proform or a 670 street avenger |
Re: ''Project '64 SYT Super Yenko Truck"
those would be good carbs for the truck. If you can get that quadrajet set up they are really good carbs. I have a friend back home that got his built from a friend that specializes in them.
|
Re: ''Project '64 SYT Super Yenko Truck"
or i could go with a 625 demon :D
|
Re: ''Project '64 SYT Super Yenko Truck"
I got it at my house now. Let me know if your still wanting it.
|
Re: ''Project '64 SYT Super Yenko Truck"
Good lord Gage, you still haven't bought his carb yet?
|
Re: ''Project '64 SYT Super Yenko Truck"
no
im 15 and i dont have a job!!!!!! i would like to get it but im tired of messin with old carbs |
Re: ''Project '64 SYT Super Yenko Truck"
hey, don't blow a gasket..........
:haha: |
Re: ''Project '64 SYT Super Yenko Truck"
:lol:
well do you see why i dont have his carb |
Re: ''Project '64 SYT Super Yenko Truck"
no
|
Re: ''Project '64 SYT Super Yenko Truck"
:haha:
well im not old enough to apply for a job and this economy sucks but anyway ill post up a video tomorrow one open headers and one with the mufflers |
Re: ''Project '64 SYT Super Yenko Truck"
kewl
|
Re: ''Project '64 SYT Super Yenko Truck"
sorry travis no videos yet ive been working on the ferd
got the rear o2 sensors welded in and fixed the wipers brake switch and 4 wheel drive with one fuse that is crazy :crazy: that all of that stuff works off of one fuse |
Re: ''Project '64 SYT Super Yenko Truck"
what else you've been doing to the CHEVY
|
Re: ''Project '64 SYT Super Yenko Truck"
put a quadrajunk on it and uhhh cut the h-pipe off
|
Re: ''Project '64 SYT Super Yenko Truck"
you keep using that f word and my monitor will explode................
|
Re: ''Project '64 SYT Super Yenko Truck"
:haha:
|
Re: ''Project '64 SYT Super Yenko Truck"
well i worked on the chevy trying to get rid of my mufflers so i can get some different ones
these are the ones i wanthttp://cgi.ebay.com/ebaymotors/FlowS...item5631e9dd9e and i built a tranny crossmember out of 3/8 flat bar and im going to gusset it tomorrow i think it looks pretty good if i had welded it prettier ill post up some pics tomorrow my brand new energy suspension tranny mount already broke (cheap made crap!!!!) |
Re: ''Project '64 SYT Super Yenko Truck"
has anyone cut holes out of there trailing arm crossmember and welded pipe in it for the exhaust to go through
im planning on doing this soon just wanted to know the best way to do it |
Re: ''Project '64 SYT Super Yenko Truck"
That would be the way to do it...the way I would do it...although, some people just cut and go...
I think Frizzle has some pics. |
Re: ''Project '64 SYT Super Yenko Truck"
i have some 1/4 wall 4 inch I.D. pipe that im going to use should fit perfect
would it be easier to do if i cut out the rivets and pulled the crossmember out and did it on the bench |
Re: ''Project '64 SYT Super Yenko Truck"
Check out Tommy's BUILD
|
Re: ''Project '64 SYT Super Yenko Truck"
I subscribed. Now I have to catch up on it. Looks like a nice build.
Glade to see your more active again Allan. |
Re: ''Project '64 SYT Super Yenko Truck"
Quote:
|
Re: ''Project '64 SYT Super Yenko Truck"
Quote:
|
Re: ''Project '64 SYT Super Yenko Truck"
Quote:
i might have a hloe saw ill have to look thanks alan for posting up that link |
Re: ''Project '64 SYT Super Yenko Truck"
No video yet ????????????
|
Re: ''Project '64 SYT Super Yenko Truck"
i know but ive got the exhaust off right now and my dad gets pissed off when i start it
but i will have some pics later |
Re: ''Project '64 SYT Super Yenko Truck"
Cut a hole in a piece of plywood you can clamp to the area your wanting to cut to keep the saw centered. and from wondering.
|
Re: ''Project '64 SYT Super Yenko Truck"
thats a good idea
|
Re: ''Project '64 SYT Super Yenko Truck"
well i didnt get the pics i got busy cleaning up the mufflers
the guy should be here tomorrow to pick them up |
Re: ''Project '64 SYT Super Yenko Truck"
the guy backed out on the mufflers and my dad made me get my truck out of the shop
so no pics or no new mufflers |
Re: ''Project '64 SYT Super Yenko Truck"
bummer
|
Re: ''Project '64 SYT Super Yenko Truck"
yeah that sucks.....
|
Re: ''Project '64 SYT Super Yenko Truck"
yep i tacked them back on today just to keep the noise down
|
Re: ''Project '64 SYT Super Yenko Truck"
well i got the holes cut but im out of argon so ill have to wait to put the pipe in
still tryin to sell my mufflers with no luck dont ever try to cut the hole with a hole saw in between th framerails and trailing arms that sucks when you destroy your hand |
Re: ''Project '64 SYT Super Yenko Truck"
that how you learn
|
All times are GMT -4. The time now is 06:34 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com