![]() |
Re: Loadmaster '47 COE
The flat lands of Oklahoma, it pretty much all looks the same until you get into the edge of the Rockies in Colorado. Passed a factory where they make the wind turbines, there are hundreds of these waiting for shipments. I would estimate they are about 75 foot long per blade and 6 to 8 foot in diameter at the mounting flange. I will try to get some pictures of the local salvage yards, they are gold mines for old trucks.
Rob http://i562.photobucket.com/albums/s...E/DSCI0394.jpg http://i562.photobucket.com/albums/s...DSCI0395_1.jpg http://i562.photobucket.com/albums/s...E/DSCI0396.jpg http://i562.photobucket.com/albums/s...E/DSCI0397.jpg |
Re: Loadmaster '47 COE
Very nice wedding pics and congrats to you and your daughter!
|
Re: Loadmaster '47 COE
I finally found something I could outrun. There is a lot of these old trucks running around in Southern Colorado with very little rust. We went up to Estes park and spotted these Elk in a pond, yes there is still snow on the Rockies. I did do some minor changes to the truck: I added a quick disconnect with air hose to fill tires of run air tools. My compressor puts out 10 CFM while the engine is running so it was handy to patch a tire for my son. I also added a Poo sheet to the Yogo mat for comfort (and style?). We're over 3K on the trip so far and starting for home later today after a round of Golf with an old friend in Wichita.
Rob http://i562.photobucket.com/albums/s...E/DSCI0399.jpg http://i562.photobucket.com/albums/s...E/DSCI0398.jpg http://i562.photobucket.com/albums/s...DSCI0402_1.jpg http://i562.photobucket.com/albums/s...DSCI0404_1.jpg http://i562.photobucket.com/albums/s...DSCI0416_1.jpg http://i562.photobucket.com/albums/s...E/DSCI0408.jpg http://i562.photobucket.com/albums/s...DSCI0413_1.jpg |
Re: Loadmaster '47 COE
Love the pics ,have a safe trip home .
|
Re: Loadmaster '47 COE
Great pics, drive safe coming home...Jim
|
Re: Loadmaster '47 COE
:agree: Safe travels.
|
Re: Loadmaster '47 COE
Great trip. Do you turn around a lot to get these pictures of the state signs and such?
|
Re: Loadmaster '47 COE
Very cool pics! You were finding a lot of trucks for sure. I really like the pic of the elk in the pond. Too cool. Have a safe and uneventful trip back home!
|
Re: Loadmaster '47 COE
Quote:
two things, 1. I wish I had known, looks like blue jeep was in town today too based on his project thread. 2. I bet you are seriously regretting the round of golf, the heat index is 106 and the humidity means I havent been outside for more than a minute or two. |
Re: Loadmaster '47 COE
epic shots man, you guys traveling with these trucks should be a kick in the rear for everyone on here to get their rides done and travel far. (easier said than done) but great motivation for some guys, very inspiring. I luuuuuv that train photo.
|
Re: Loadmaster '47 COE
Yes, it was hot, hot, hot playing golf. Do I turn around for the sighs? nope I watch the GPS it's got a dotted line for state lines. A few more shots: Somewhere in Kansas my CB antenna decided it had had enough wind and snapped over. A couple of things I picked up at yard sales in the country side. An old steamer chest which I will convert into an engine cover to replace the box. Some old Caddy hub caps. A Shock Top beer tap handle, could make a cool shifter knob. I think I picked up every bug in the mid-west. Home now, total miles 3,873. Average mileage 16.29 MPG. Truck issues: one broken CB antenna, one leaking air fitting on the air ride system (was able to repair on the road). Biggest complaint: I need AC!!!
Rob http://i562.photobucket.com/albums/s...E/DSCI0432.jpg http://i562.photobucket.com/albums/s...E/DSCI0429.jpg http://i562.photobucket.com/albums/s...E/DSCI0437.jpg http://i562.photobucket.com/albums/s...E/DSCI0436.jpg http://i562.photobucket.com/albums/s...DSCI0426_1.jpg |
Re: Loadmaster '47 COE
That was an awesome trip and some good finds! Thanks for sharing.
|
Re: Loadmaster '47 COE
Enjoyed the ride along, truck is doing great...Jim
|
Re: Loadmaster '47 COE
Glad you had a great trip and the chest looks good too.
|
Re: Loadmaster '47 COE
admit it. you were trying to figure out a way to get that cab forward home, weren't you? :lol:
|
Re: Loadmaster '47 COE
Sweet trip with very little issues :metal: The bugs just show ppl you drive it. If you didn't know all beer tap handles use a 3/8"x 18 thread I had to make an adapter out of brass for mine. Nice Chest my GF would love to have one like that.
|
Re: Loadmaster '47 COE
Thanks for taking us along. I'd say the mileage was pretty good considering the frontal area. dug
|
Re: Loadmaster '47 COE
awesome miles. Iv never been big on AC but I can totally see having it on a trip like that.
|
Re: Loadmaster '47 COE
So I've been working on a new engine cover, the box worked I just wanted to try something different. I made a steel hinged support with some stops on the inside and then added the wood with a cutout for the engine cover. I still need to do the front wood panel. I just can't decide which way I want to go: I have a old steamer trunk (kinda large) I can cut the bottom out of and use it, or I have an old smaller tool box that I could do the same to or I could just leave the Vortec engine cover exposed. You guys got any input on this? The box is no longer an option because I used the wood for the cover.
Rob http://i562.photobucket.com/albums/s...E/DSC00027.jpg http://i562.photobucket.com/albums/s...E/DSC00028.jpg http://i562.photobucket.com/albums/s...E/DSCI0437.jpg |
Re: Loadmaster '47 COE
I like the box, but it looks like it is taking up a lot of real estate.
|
Re: Loadmaster '47 COE
I agree with solid!
|
Re: Loadmaster '47 COE
Quote:
|
Re: Loadmaster '47 COE
Maybe a lexan box to show it off, or smaller wooden box, could put a false bottom in the large box and make the top 1/2 useful.
|
Re: Loadmaster '47 COE
Seeing as you use this truck as a truck, a cover is needed. I'd vote tool box, depending on it's looks. The trunk is cool, but too large. Let me sleep on it and try to come up with something else.
|
Re: Loadmaster '47 COE
if you could find an old tool chest and make it fit over the engine, that might look real kool
|
Re: Loadmaster '47 COE
OK, with it being so dang hot I haven't been doing a lot of truck work lately. I have on the other hand been doing some research on adding AC to the truck. I have decided to go with the Vintage Air Mark IV under dash unit with cool function only. I will also use the donor truck compressor after moving my alternator to some other location and opening up that space. Keep in mind I am also running an engine driven air compressor (converted York) for the air ride system so space on the front of the engine is at a premium. I will take some pictures and give some details as I go.
Rob |
Re: Loadmaster '47 COE
Always look forward to your work Rob. We have had the same heat/humidity. Very hard to muster motivation. Especially after working on other people's cars for 9 hours!
I think you need to stuff a turbo in there as well! |
Re: Loadmaster '47 COE
So my Vintage Air unit arrived today. I was a little hesitant to fork over the extra bucks for this unit when I found quite a few for under $100 on the net. That being said I can see what you pay for: All the units I found for cheep had only a 4 pass evaporator coil and a plastic case, the Vintage Air unit has at least an 8 pass coil (that I can see through the vents) and a metal case. Below is what I received. A few things had to be moved, overall this part was easy to install. I should receive the remaining parts later this week.
Rob http://i562.photobucket.com/albums/s...E/DSC00061.jpg http://i562.photobucket.com/albums/s...E/DSC00060.jpg http://i562.photobucket.com/albums/s...E/DSC00065.jpg |
Re: Loadmaster '47 COE
1 Attachment(s)
|
Re: Loadmaster '47 COE
Dang, that looks just like my truck. Yes, on rare occasions I will buy from HF.
Rob |
Re: Loadmaster '47 COE
Received some more parts for the AC system: a hose kit with 4 foot extra on the hoses and a dryer with switch. I need extra hose due to the engine location. I have been mocking up the new belt routing on a extra Vortec engine, looks like a 110 inch belt will do it. You can see the area I have to work with, things are much easier on the spare engine. You can also see I will need to modify the lower part of the compressor mount.
Rob http://i562.photobucket.com/albums/s...E/DSC00069.jpg http://i562.photobucket.com/albums/s...E/DSC00072.jpg http://i562.photobucket.com/albums/s...E/DSC00070.jpg http://i562.photobucket.com/albums/s...E/DSC00074.jpg |
Re: Loadmaster '47 COE
The mock up engine sure beats pulling the front end apart. Good idea!
|
Re: Loadmaster '47 COE
Even in a normal truck that is a great idea.
|
Re: Loadmaster '47 COE
Making more progress on the AC install. You can see why I originally mounted the alternator in the AC compressor location. I also had to move the fuel lines and rewire the alternator. I ended up cutting a bit out of the rear of the seat surround, I have heavy wall 1 inch tubing for support and some other gussets in place so I think it will be OK. I built a mount for the condenser and now have it, the compressor and the evaporator installed. I had to order some additional fitting so it will be at least next week before I can charge and test the unit.
Rob http://i562.photobucket.com/albums/s...E/DSC00081.jpg http://i562.photobucket.com/albums/s...E/DSC00082.jpg http://i562.photobucket.com/albums/s...E/DSC00084.jpg http://i562.photobucket.com/albums/s...E/DSC00092.jpg |
Re: Loadmaster '47 COE
Jerry cans on either side with ammo box in middle. Cans could be storage, not just fluids. http://www.jerrycan.com/shop/jerry-c...lity-tool-box/
Coke cooler http://www.ebay.com/itm/Vintage-Coca...3D331941502721 |
Re: Loadmaster '47 COE
Ta Da! I now have working AC in the truck. I crimped the lines last week and a friend loaned me some gauges and a vacuum pump. I vacuumed the system for about an hour (after adding oil), charged the system with 2 cans of Freon and bingo 42 degree air. During the process I also rewired the fans to run at half speed. I didn't need full speed and the truck never got over 200 degrees. You can see the fire wall is getting a bit crowded with hoses.
Rob http://i562.photobucket.com/albums/s...E/DSC00093.jpg http://i562.photobucket.com/albums/s...E/DSC00096.jpg http://i562.photobucket.com/albums/s...E/DSC00098.jpg |
Re: Loadmaster '47 COE
Does it cool the whole cab down well? If you are happy with it, I'm going to buy one of those Mark IVs.
|
Re: Loadmaster '47 COE
So far cools great. I don't yet have and insulation on the main floor, I do have it over the engine covers, and drivers door has a gap issue and I still run the unit on low speed and at about 25 % on the temperature dial. I ran it on high to test it and the fan is not to noisy on high speed. Air temp is a solid 42 degrees at the vents so it does not take long before you want to turn it down. Took it for a 2 hour drive today (90 degrees) and all worked great.
Rob |
Re: Loadmaster '47 COE
Nice work, very cool, pun intended.
|
Re: Loadmaster '47 COE
Luckily you have plenty of firewall for all those hoses/tubing. Great work as usual!
|
All times are GMT -4. The time now is 10:10 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com