![]() |
Re: My 1965 build thread
Good idea Allan, but what do you have to do to the inner shaft make the switch work? Isn't there an easier way? You got me thinking now.
|
Re: My 1965 build thread
I would just bypass the nutral safty switch
|
Re: My 1965 build thread
Quote:
Quote:
After I got my measurements and a plan this is what happened. I didn't take pix of the cut I made on the inner tube where the switch is activated. It looks almost like the original hole just in a different location. http://i369.photobucket.com/albums/o...2/DSC08968.jpg http://i369.photobucket.com/albums/o...2/DSC08969.jpg http://i369.photobucket.com/albums/o...2/DSC08970.jpg http://i369.photobucket.com/albums/o...2/DSC08971.jpg http://i369.photobucket.com/albums/o...2/DSC08973.jpg And there is continuity in park. I tacked everything in place and checked with a meter before I weld everything up. http://i369.photobucket.com/albums/o...2/DSC08974.jpg |
Re: My 1965 build thread
NICE:metal:
|
Re: My 1965 build thread
nice work Alan!
|
Re: My 1965 build thread
I get it....sorry dude. I see whats up now; thats slick. Was the switch interfering with something? Your mount is clean too. My column installed by the PO has a cobbled up mount combined of the late(?) 70's column mount and the original. The column is also too short.
|
Re: My 1965 build thread
Quote:
Quote:
:thumbs:X2 Quote:
|
Re: My 1965 build thread
The slot on the inner cylinder wasnt registering to me. Probably because I havent torn apart a column before. I knew it worked mechanically.
|
Re: My 1965 build thread
Man I'm tired, just went through the whole thread again to find how you welded the rocker to the floor. I noticed you made holes in the new rocker. Did you use a spot weld bit? Every time I go through your thread I find something new I learned. This is like my third time I have gone through it.
Thank you. |
Re: My 1965 build thread
Alan,
The switch relocation looks slick. Good job.:metal: |
Re: My 1965 build thread
Quote:
And thanks for taken the time to share with us. |
Re: My 1965 build thread
Quote:
Quote:
Quote:
Quote:
Had a little time to shave the key hole and fill today. The pix are pretty much self explanatory. http://i369.photobucket.com/albums/o...d/DSC08975.jpg I made the cut with a thin cutoff wheel and cleaner up with a grinder. (It's aluminum) http://i369.photobucket.com/albums/o...d/DSC08978.jpg Put a piece of tape to plug the hole for the next step. http://i369.photobucket.com/albums/o...d/DSC08979.jpg This stuff is great for bonding panels and have used it in some other circumstances, so why not try it here. http://i369.photobucket.com/albums/o...d/DSC08980.jpg It is slow to dry. It needs at least 4 hours at 70 degrees, 24 to fully cure. Once cured it can be dressed down and maybe wiped with a thin coat of filler if needed. http://i369.photobucket.com/albums/o...d/DSC08981.jpg Finished welding and grinding. http://i369.photobucket.com/albums/o...d/DSC08982.jpg Went ahead and wiped it to clean it up a little more. http://i369.photobucket.com/albums/o...d/DSC08983.jpg |
Re: My 1965 build thread
lookin good:metal:
|
Re: My 1965 build thread
Quote:
Not a whole lot going on here, just enjoying the beautiful weather. As most know I picked up another truck for the hood. I've got the rest of the truck in the classified section with a choice of one of my other 2 hoods. I've kind of got out of the groove. Trying to get back in the saddle. I think we have all been there. You decide to take a day or 2 off then before you know it it is a week later. http://i369.photobucket.com/albums/o.../Photo0019.jpg |
Re: My 1965 build thread
Quote:
|
Re: My 1965 build thread
In my case... since september!
I did go stare at it for an hour yesterday... does that count?:lol: |
Re: My 1965 build thread
Alan, thanks for the in-depth photos and detail of what you’re doing. This effort will no doubt save many tears for a lot of folks later on and is a great example of why this forum is so important.
Mac. :chevy: |
Re: My 1965 build thread
Quote:
|
Re: My 1965 build thread
I hear you on the taking a break. Got cold her so I took a break for a month or two. Then right when I started getting excited it Snows for two days in the beginning of March. What gives?
|
Re: My 1965 build thread
Quote:
Quote:
Quote:
Quote:
Stayed tuned I'm fixin' to post some pix of what I got done today. |
Re: My 1965 build thread
Started working on the rear wheel tubs. I used a zizz wheel to cut off bolts that were spinning. Then scraped all undercoating off.
http://i369.photobucket.com/albums/o...2/DSC09055.jpg Some prior attempts at body work by PO's http://i369.photobucket.com/albums/o...2/DSC09057.jpg I used this air hammer bit (it's my mobile plannishing hammer) to help massage the metal back into shape. I used a big piece of iron (frame rack) as a back plate while using the hammer. http://i369.photobucket.com/albums/o...2/DSC09059.jpg Here is the metal almost back in shape and some of the tools used in the process. I also used a ball peen hammer. http://i369.photobucket.com/albums/o...2/DSC09058.jpg Here is what the other side looked like when I started on it. http://i369.photobucket.com/albums/o...2/DSC09065.jpg Also primed the column. http://i369.photobucket.com/albums/o...2/DSC09060.jpg And then based with the same color as the gauge pods. This is base only no pix of it cleared yet. http://i369.photobucket.com/albums/o...2/DSC09063.jpg |
Re: My 1965 build thread
Looking good!!
Wish I had your skills Alan. I'm trying though!;) |
Re: My 1965 build thread
1 Attachment(s)
Hey Alan is this something that can be bought or was it custom made? Is that a regular air hammer you use it in? Your truck is coming along nicely. This thread is one of the ones I have to check everyday.
|
Re: My 1965 build thread
Looking good Alan. What are you gonna do for a bed floor?
|
Re: My 1965 build thread
Nice job on the column Alan...the end result looks like perfection !!
|
Re: My 1965 build thread
Looken good Allan. I use the same end on my air hammer. It works on other things too. I ground off a little on the edge so it would fit some King Pin bearings. It worked perfectly.
|
Re: My 1965 build thread
Quote:
Quote:
http://i369.photobucket.com/albums/o...2/DSC09074.jpg http://i369.photobucket.com/albums/o...2/DSC09075.jpg Quote:
Quote:
Quote:
On to new news. Got another shelving unit. Nice and clean for now........ http://i369.photobucket.com/albums/o...DSC09067-1.jpg I can finally get all or most of my loose pieces for the truck back in one spot. http://i369.photobucket.com/albums/o...DSC09070-1.jpg Also picked up this air compressor. It's a 7.5HP 80 gal 2 stage pump. I need to locate a pump and pully and test the motor. If anyone has any connections for a pump please let me know. http://i369.photobucket.com/albums/o...2/DSC09071.jpg Blocked both the doors with 400 http://i369.photobucket.com/albums/o...2/DSC09078.jpg Used a mini DA with 400 on some rough areas of the jamb and scuffed the rest down with a grey scotch brite pad. Ready for sealer and some color. http://i369.photobucket.com/albums/o...2/DSC09077.jpg |
Re: My 1965 build thread
Dang Alan, You sure know your metal work. I noticed this thread is always at the top. You have em sittin on the edge.;)
I enjoy lookin through here,always somethin new. |
Re: My 1965 build thread
Quote:
http://www.northerntool.com/webapp/w..._6970_87+90145 |
Re: My 1965 build thread
Quote:
Quote:
Got out in the shop for quite a while today. Spent most of it cleaning up. Tony and Strodder's shop is my inspiration. Maybe someday I'll get it right. The pile in the floor is trash. http://i369.photobucket.com/albums/o...2/DSC09114.jpg http://i369.photobucket.com/albums/o...2/DSC09116.jpg Got a blind hung and somemore family antiques hung. http://i369.photobucket.com/albums/o...2/DSC09117.jpg On too the truck. The column is back in. http://i369.photobucket.com/albums/o...2/DSC09120.jpg Nuetral safety http://i369.photobucket.com/albums/o...2/DSC09121.jpg Ummmmmm..........I think I know where everything goes. http://i369.photobucket.com/albums/o...2/DSC09124.jpg Now the fun part sanding the jambs getting the cab ready for paint. There is still alot of work to do to get the cab ready. http://i369.photobucket.com/albums/o...2/DSC09125.jpg |
Re: My 1965 build thread
Wow man its looking really good!! :metal:
|
Re: My 1965 build thread
Quote:
Left work early today due to lack of work. Worked again on the column to see if I could get it back together. Here is kind of a step by step. The tilt mechanism is already in. Here is the tilt spring going in. http://i369.photobucket.com/albums/o...2/DSC09132.jpg I found that a #2 phillips does a great job of pushing the spring and doing a 1/4 turn to lock in place. http://i369.photobucket.com/albums/o...2/DSC09134.jpg Go ahead and run the turn signal switch wires if you haven't done so yet. Then install the upper shroud. http://i369.photobucket.com/albums/o...2/DSC09135.jpg Install the turn signal switch http://i369.photobucket.com/albums/o...2/DSC09136.jpg Install the hazard light knob, turn signal lever and horn contact with spring under it. http://i369.photobucket.com/albums/o...2/DSC09137.jpg Here's a fun part. Make sure the column shaft to the gearbox is installed. If not the steering shaft will push down into the column and will be impossible to get the snap ring on. Getting it off wasn't fun either. It probably would have been easier with it installed in the truck when removing it (snap ring). I don't have the special tool that they called for. I used 2 medium common screw drivers and pushed evenly on both sides of the snap ring until I got the snap ring to lock into place. http://i369.photobucket.com/albums/o...2/DSC09138.jpg http://i369.photobucket.com/albums/o...2/DSC09139.jpg Other than getting a new steering wheel and some new (bling) levers. I can call this done. As long as it works. http://i369.photobucket.com/albums/o...2/DSC09147.jpg While I was down in the floor I noticed that the holes that I drilled to mount the fuse panel have an issue. The top left hole is right behind the inner fender flange. Uh Oh. http://i369.photobucket.com/albums/o...2/DSC09140.jpg |
Re: My 1965 build thread
Good job on getting that column back together.:lol:
Bummer about the bolt holes though. |
Re: My 1965 build thread
Quote:
I got something else completed today. The sway bar brackets got mounted to the frame. I was just dreading drilling upside down.:lol: http://i369.photobucket.com/albums/o...2/DSC09149.jpg Also ripped the front sheet metal off again to finish up the cab. Notice the gloves to protect the paint on the frame. http://i369.photobucket.com/albums/o...2/DSC09148.jpg |
Re: My 1965 build thread
Super work Alan,
Ever thought about doing a show on the PBS channel? You could call it "THIS OLE TRUCK" |
Re: My 1965 build thread
Quote:
|
Re: My 1965 build thread
Found this damaged F$rd Ranger tailgate at work today and the wheels started turning.
http://i369.photobucket.com/albums/o...e/DSC09155.jpg I think ya'll know where I'm going with this. http://i369.photobucket.com/albums/o...e/DSC09156.jpg I can do body work, but I struggle with custom stuff. I believe I can make this work. The latch on the bedside post is just stuck in there. The center of the latch hole needs to be about 3" from the top according to my quick measurements. Actually the top hole of the stricker might line up with the factory bolt hole at the top on the bedside. http://i369.photobucket.com/albums/o...e/DSC09157.jpg Here are all of the pieces laid out. http://i369.photobucket.com/albums/o...e/DSC09158.jpg I think with a little modifications this will fit. http://i369.photobucket.com/albums/o...e/DSC09159.jpg The complete handle assy is a little thick. But if I put a curved raised access panel on the inside of the tailgate it might work. I've got to do some more measurements. No matter how much I think about it I won't think of everything. I've seen alot of ideas posted about chainless tailgates, but haven't seen one done like this. If I have I can't recall it. Please give me some feedback about possible problems I might incur. http://i369.photobucket.com/albums/o...e/DSC09165.jpg |
Re: My 1965 build thread
Just a thought Allan. Put the handle on the inside, and keep the tailgate smooth. Like they do on the newer trucks. They make a handle relocation kit for them. Like this one.
https://www.carolinaclassictrucks.co...relocator.html |
Re: My 1965 build thread
4 Attachment(s)
Allen your progress is looking good. Love the silver on the insterments and column. I did a similar deal on the tailgate using a wrecked late models S10 gate. I also thought about putting the handle on the inside but as you said it was to wide for the gate and would have had to build a panel to accommodate the depth of the handle. I cut down the strikes and latches and they nicely into the bedsides and gate. In order to attach them I drilled holes were they needed to attach and then drilled and tapped some 5/16" flat bar. Then pulled the flat bar up in form behind with a piece of tie wire welded to the end of some alltread that I had screwed into the mounting holes. Then plug welded it in. I decided to just weld some nuts onto the latches and use some nice chrome Pike nuts and made some stainless bezels for the pikes to slide on instead of messing with the latch. I also welded up the detent on the bedside. I will use the pike nuts on the outside of the tailgate were the cable attaches as well.
|
Re: My 1965 build thread
2 Attachment(s)
Example.
|
All times are GMT -4. The time now is 04:34 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com