Re: Do you need '64-'66 Chevy Truck Parts?
 

his address, his number and his email are in his signature line...

-W

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks guys I was able to get in touch with him and everything is cool. ;)

Re: Do you need '64-'66 Chevy Truck Parts?
 

Brian:

Welcome to the forums and thanks for the inquiry. Also, thanks for the dedication to our country.

I have a few good, used hood shells, as well as, the passenger side vent window assembly. Shipping a hood is rather expensive and perhaps you can make a stop at my shop in Kansas City, KS, during your visit to Coffeyville, KS, which is about 2 hours south of Kansas City. If not, I can build a crate for a hood and have it shipped to you, via dedicated truck.

Please let me know your thoughts and I will proceed accordingly.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good morning and thanks for the inquiry. I looked high and low for a good-quality factory 4-row Harrison desert cooler, but could only find a 3-core, that was similar in style, fit and finish. I checked with all the usual suspects, that offer aftermarket parts for these trucks.

I do have a factory Harrison 4-row, that I just had recored a few months ago and it has never been installed, however it has the lower auto tranny line connections. I had it boiled-out, recored and repainted, so it looks like new. All the work I had done on it was $400.00, so I would need to get $450.00, plus shipping.

I was looking for a set of factory locking hubs for my '66 Chevy K20, but was not able to find the correct style, so I don't have a remanufactured set available. Sorry I couldn't help you with this item, but please let me know if I can help you with the radiator or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Woog:

Good to hear from you. Any chance you can send me a PM with a photo of the style you are looking for. I have both styles but want to make sure we are talking about the same one. I will reply accordingly and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hi Tony, I'm needing one rear cab frame mount, two core support frame mounts and radiator support crossmember for a 65 4x4. I am also interested in a drivers bed side for a 65 long bed fleetside. Can you help with any of these?

Thanks!

Re: Do you need '64-'66 Chevy Truck Parts?
 

Kent:

Good morning and thanks for the inquiry. Is your 4x4 a 1/2 ton or 3/4 ton? By rear cab frame mount, do you meant the mount that is attached to the frame rail or the actual cab support attached to the rear of the cab?

I have a good radiator cross member, as well as a driver side lwb fleetside bed side. Since you are in Sedalia, MO are you planning to pick these items up at my shop in Kansas City, KS or do you want me to have them delivered?

Please let me know your thoughts and I will proceed accordingly. Thanks for the opportunity and have a nice day.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony, my truck is a 1/2 ton and I need the mounts that are riveted to the frame rail circled in red. I will come to your place to pick up the parts.
Thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

forgot to attach picture

Re: Do you need '64-'66 Chevy Truck Parts?
 

you have any 65 gmc front turn signals?

Re: Do you need '64-'66 Chevy Truck Parts?
 

oh so you do read your pm's

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony,

I am looking for a power steering box for a 63 4x4 SWB pick up. You got anything that will bolt up?

Coop

Re: Do you need '64-'66 Chevy Truck Parts?
 

How much for a large hump tranny bolt in cover for a 64 chevy? Shipped to 95694? Thanks! Tony from Norcal

Re: Do you need '64-'66 Chevy Truck Parts?
 

Looking for a working 64 gauge cluster. Do you have any?

DZL1.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Tony,

I'm looking for a Hood Latch for my '66 and do ya know of anyone that can rebuild the odometer in my guage cluster?

Thanks.
Danny

Re: Do you need '64-'66 Chevy Truck Parts?
 

Kent:

You have a PM regarding these items. Thanks and let me know if I can help.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. The turn signal assemblies I have are complete, but the lenses are cracked. Replacement lenses are available in the aftermarket. If you only need the buckets, I can help. Please let me know and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

You have a PM regarding this item. Please let me know if I can help and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Coop:

Thanks for the inquiry. I just sold my last factory 4x4 manual steering gear box to a fellow in Marina del Rey, CA. I will check to see if I have another one in my inventory, but I think I am out. Have you checked locally for a shop that can rebuild your's or you might try www.truckandcarshop.com, in Orange, CA for a rebuild kit for the factory 4x4 manual steering gear box. I think they have them.

Thanks for the opportunity and I will double-check to ensure if I have one or not.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony:

Good morning and thanks for the inquiry. You have a PM regarding the high hump tranny cover. Thanks for the opportunity and please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

DZL1:

Good morning and thanks for the inquiry. You have a PM regarding a 4-5-6 Chevy truck dash cluster with factory gauges. Thanks for the opportunity and please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Danny:

Good morning and thanks for the inquiry. There is a top hood latch and a bottom hood catch. Do you need the latch that attaches to the hood or the catch that attaches to the grille support? Please let me know, because I have both and I want to make sure I provide the parts you need.

I can rebuild your speedometer, which includes disassembly, lubrication, reset to 0000000, reassembly, new face graphics, new mile graphics and refinish the needle. This service, including return shipping, is $100.00.

Please let me know if I can help you with this item or other 4-5-6 Chevy truck stuff in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I found an excellent driver side stepside fender, without the spare tire cut-out, while I was in Marina del Rey, CA, last week. I couldn't bring it on the flight back home with me, but I will have it shipped direct to you. I also have the passenger side stepside fender at my shop, so I will get that shipped to you, as well, along with the top rear shock mount.

Sorry for my delay and thanks for hanging in there with me on this.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony,

It's the upper latch in the hood I'm looking for and the $100 buck for a gauge cluster make-over sounds like a pretty good deal.

So how much for the latch..?

Thanks.
Danny

Re: Do you need '64-'66 Chevy Truck Parts?
 

The upper hood latch is $20.00, including shipping. The gauge clusters I do are not a complete refurbish, but I freshen them up pretty nice.

If you want to move forward with these items, I accept PayPal at:

4-5-6chevytrucks@sbcglobal.net

I also accept cashiers check or money order at the address in my signature. Please let me know if I can help you with these or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Looking for lower SBC SWP 2 groove pulley for my 283. You happen to have?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. I sent you a PM regarding the factory 2 groove crank pulley for a 283 V8. Please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I just acquired a number of good, used door shells, front fenders, inner fenders, hoods, a very nice small back window cab and a number of other smaller parts. If you need any of these items or other good, used '60-'66 Chevy trucks parts, please let me know and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

good morning Tony!!! whats you price on a radio ant. 64-66 any pictures,is there just one style? thanks Morton

Re: Do you need '64-'66 Chevy Truck Parts?
 

hey tony I'm looking for a reproduction parking light harness for a 66.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hello Tony,

Once again I am coming to you for a small, obscure part I can't find anywhere else.

I am looking for a Gravel Guard for a 1965 Step Side Pick Up. I need the one for the passenger side, but the Factory Assembly Manual list one part number for both sides, so I guess they are interchangeable. This is the cover that goes over the bumper brackets on the rear.

I have the one for the Driver's side, but the other one is missing.

Thanks !

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks Tony! I got the fenders and they were totally worth the wait!

Re: Do you need '64-'66 Chevy Truck Parts?
 

im looking for both fenders for my 66 GMC aswell as a driver side door. If you have anything shoot me a pm, thanks.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Mort:

I have a few good, used factory radio antennae. As far as I know, there is only one style. It is $30.00, including the coax cable and shipping. Please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good morning and thanks for the inquiry. I don't sell any new reproduction items, but a good, used park lamp harness for a '62-'66 Chevy truck is $20.00, including shipping. It includes the factory sockets and firewall plug.

Please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good morning and thanks for the inquiry. I need to check my inventory for the stepside factory rock guards. I know I have a pair of fleetside factory rock guards, but they are different than the stepside style.

Thanks and I will let you know what I find.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Jason:

Good news...I am glad to hear you received them in good condition and you are happy with them.

Please let me know if I can help you with other good, used 4-5-6 Chevy truck parts in the future and thanks for your business.

Re: Do you need '64-'66 Chevy Truck Parts?
 

PM sent. Thanks for the opportunity and please let me know if I can help you with these items or other good, used 4-5-6 Chevy truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

hey would you happen to have a 64-66 gmc hood and grill?

Re: Do you need '64-'66 Chevy Truck Parts?
 

DO you happen to have a straight and rust free 63 Chevy C-10 hood? I am also looking for a gauge cluster with all gauges instead of idiot lights for the same 63. Thanks.