The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 18 of 21 « First 81314151617 18 192021
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Vendors Marketplace (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=195)
-   -   Vintage air - huge sale! (https://67-72chevytrucks.com/vboard/showthread.php?t=642573)

BIG ORANGE 01-30-2021 03:31 PM
Re: Vintage air - huge sale!
 
I got a 71 non A/C truck, price on unit with vents along the bottom of dash and compressor on Pass, side. electric controls.
29720 zip
thanxs Donnie

01chevduramax 02-06-2021 11:59 AM
Re: Vintage air - huge sale!
 
Can I get a quote, and lead time for a gen IV kit for my 1971 truck? I want to use the factory AC controls. I do not need a compressor or lines. It’s a factory AC truck with a shaved firewall.

MCB Matt 02-08-2021 01:03 PM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by 01chevduramax (Post 8875891)
Can I get a quote, and lead time for a gen IV kit for my 1971 truck? I want to use the factory AC controls. I do not need a compressor or lines. It’s a factory AC truck with a shaved firewall.
PM has been sent.
Thanks
MCbparts

88Stanger 02-13-2021 11:18 AM
Re: Vintage air - huge sale!
 
Just a note: I bought my full system from MCB Matt - Matt's Classic Bowties and they have some of the best customer relations!! Fast shipping, cheap prices... i fully recommend them!!

MCB Matt 02-15-2021 12:19 PM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by 88Stanger (Post 8879390)
Just a note: I bought my full system from MCB Matt - Matt's Classic Bowties and they have some of the best customer relations!! Fast shipping, cheap prices... i fully recommend them!!
Thank you very much! We truly appreciate your support and kind words!

Thanks again!
Kim
MCBparts
925-828-5555

Tmend 02-16-2021 12:53 AM
Re: Vintage air - huge sale!
 
Looking for a complete system for my 72 blazer. Right side mounted compressor and will also need control panel. Please quote me.

MCB Matt 02-16-2021 01:04 PM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by Tmend (Post 8880929)
Looking for a complete system for my 72 blazer. Right side mounted compressor and will also need control panel. Please quote me.
PM on the way.
Thanks
Kim
MCBparts
925-828-5555

weasel29gm 02-17-2021 07:28 PM
Re: Vintage air - huge sale!
 
Need quote on 69 non air rh side to 25070 thanks for your time

MCB Matt 02-17-2021 07:55 PM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by weasel29gm (Post 8881669)
Need quote on 69 non air rh side to 25070 thanks for your time
PM on the way.
Thanks
Kim
MCBparts
925-828-5555

jonesky2 02-22-2021 02:50 PM
Re: Vintage air - huge sale!
 
Looking for a quote for my 72c10. Non factory air, using factory air controller. Would like the to see if you could also get the sanden sd7 model 7176 mini compressor

MCB Matt 02-22-2021 02:54 PM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by jonesky2 (Post 8884018)
Looking for a quote for my 72c10. Non factory air, using factory air controller. Would like the to see if you could also get the sanden sd7 model 7176 mini compressor
PM on the way.
Thanks
Kim
MCBparts

Hawkynz 02-28-2021 11:09 PM
Re: Vintage air - huge sale!
 
Hello Matt,

Looking to use a Vintage Air in my 1970 GMC non factory air. Using an LS engine with the LS compressor on the passenger side. Looking for a quote please.
Thank you James

MCB Matt 03-01-2021 01:12 PM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by Hawkynz (Post 8886872)
Hello Matt,

Looking to use a Vintage Air in my 1970 GMC non factory air. Using an LS engine with the LS compressor on the passenger side. Looking for a quote please.
Thank you James
PM on the way!
Thanks
Kim
MCbparts

gpat@earthlink.net 03-03-2021 11:24 PM
Re: Vintage air - huge sale!
 
Hey Matt. Need a price on a system for a 72 Blazer. I have converted the dash to an AC dash with the round side vents and center vent. Quote with and with compressor. i do have the original compressor already fitted on engine. Switches to look like original . Firewall has been smoothed out . Thanks Pat.

MCB Matt 03-04-2021 12:50 PM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by gpat@earthlink.net (Post 8888292)
Hey Matt. Need a price on a system for a 72 Blazer. I have converted the dash to an AC dash with the round side vents and center vent. Quote with and with compressor. i do have the original compressor already fitted on engine. Switches to look like original . Firewall has been smoothed out . Thanks Pat.
PM on the way.
Thanks
Kim
MCBparts
925-828-5555

scf100 03-08-2021 05:29 PM
Re: Vintage air - huge sale!
 
Matt,

need a qoute on Vintage AC setup for a 1970 Chevy 2WD Blazer non AC cab......BBC and auto trans

Thanks,
Stuart

MCB Matt 03-08-2021 05:50 PM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by scf100 (Post 8891208)
Matt,

need a qoute on Vintage AC setup for a 1970 Chevy 2WD Blazer non AC cab......BBC and auto trans

Thanks,
Stuart
PM on the way.
Thanks
Kim
MCBparts
925-828-5555

Peanut74 03-14-2021 09:22 AM
Re: Vintage air - huge sale!
 
Hi Matt,
I need a quote and guidance on a Vintage Air unit for my '67 C10 pickup. What I have is:
- '67 cab with factory A/C dash
- Shaved the firewall but don't mind drilling holes for the A/C and heater lines if I have to
- I used an early serpentine system and it is setup for an R4 compressor
- Compressor is on the passenger side
- I do have the outer A/C vents but the center vent outer cover is broken.
- Would like to use the Surefit design with the electronic conversion of the factory control
- I will need the A/C hoses, and interior ducting for both and A/C and defrost

Thanks,
Bob

MCB Matt 03-15-2021 12:11 PM
Re: Vintage air - huge sale!
 
Hello,
PM on the way.
Thanks
Kim
MCBparts
925-828-5555
Quote:
Originally Posted by Peanut74 (Post 8893994)
Hi Matt,
I need a quote and guidance on a Vintage Air unit for my '67 C10 pickup. What I have is:
- '67 cab with factory A/C dash
- Shaved the firewall but don't mind drilling holes for the A/C and heater lines if I have to
- I used an early serpentine system and it is setup for an R4 compressor
- Compressor is on the passenger side
- I do have the outer A/C vents but the center vent outer cover is broken.
- Would like to use the Surefit design with the electronic conversion of the factory control
- I will need the A/C hoses, and interior ducting for both and A/C and defrost

Thanks,
Bob

Moore87 03-16-2021 02:11 PM
Re: Vintage air - huge sale!
 
Can I get a price on a complete system for a 1971 GMC with factory air?

I will also need the R-4 conversion bracket for the compressor. Will also need a 6 rib serpentine pulley on the new compressor instead of the V belt pulley

MCB Matt 03-16-2021 02:20 PM
Re: Vintage air - huge sale!
 
Hello,
PM on the way!
Thanks
Kim
MCbparts
925-828-5555

Quote:
Originally Posted by Moore87 (Post 8895144)
Can I get a price on a complete system for a 1971 GMC with factory air?

I will also need the R-4 conversion bracket for the compressor. Will also need a 6 rib serpentine pulley on the new compressor instead of the V belt pulley

tony2tall 04-10-2021 12:26 PM
Re: Vintage air - huge sale!
 
Helo,
Please PM me a quote for Vintage Air SureFit. Complete Kit
1971 C10 w/o Factory A/C
I have an 2005 LQ4 engine swap. Is it possible to use the 2005 LQ4 compressor?
Please include shipping to 53172
Thanks

MCB Matt 04-12-2021 12:03 PM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by tony2tall (Post 8906347)
Helo,
Please PM me a quote for Vintage Air SureFit. Complete Kit
1971 C10 w/o Factory A/C
I have an 2005 LQ4 engine swap. Is it possible to use the 2005 LQ4 compressor?
Please include shipping to 53172
Thanks
PM on the way.
Thanks
MCBparts

Jon B. 04-20-2021 01:29 PM
Re: Vintage air - huge sale!
 
Quote please!
'72 C10 (350) with factory air.

Jon

MCB Matt 04-20-2021 01:30 PM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by Jon B. (Post 8910960)
Quote please!
'72 C10 (350) with factory air.

Jon
PM on the way.
Thanks
Kim
MCBparts

BIG ORANGE 05-03-2021 02:28 PM
Re: Vintage air - huge sale!
 
You sent me a pm with a price on a unit, what's the turn around on shipping if ordered say on a Monday from South Carolina?

scf100 05-03-2021 02:42 PM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by BIG ORANGE (Post 8916482)
You sent me a pm with a price on a unit, what's the turn around on shipping if ordered say on a Monday from South Carolina?

what he said........

MCB Matt 05-03-2021 03:34 PM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by BIG ORANGE (Post 8916482)
You sent me a pm with a price on a unit, what's the turn around on shipping if ordered say on a Monday from South Carolina?
Hello,
Unfortunately Vintage air is running about 8+ weeks behind on getting kits built and out the door.
If you have any questions let me know
Thanks
Kim
MCBparts
925-828-5555

Dross9065 05-04-2021 12:33 AM
Re: Vintage air - huge sale!
 
Looking to get the in cab kit for my 72 Chevrolet. I believe vintage air # is 754170. Can you please give me a price and lead time?

MCB Matt 05-04-2021 11:27 AM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by Dross9065 (Post 8916747)
Looking to get the in cab kit for my 72 Chevrolet. I believe vintage air # is 754170. Can you please give me a price and lead time?
DM on the way.
Thanks
Kim
MCBparts
925-828-5555

yote1234 05-04-2021 04:33 PM
Re: Vintage air - huge sale!
 
I Bought a complete vintage air from you about 1 1/2 years ago for my 78 k5 blazer and now ready to install. can you refer a company local in the mesa/phx area??? thx Dave

spmtamu11 05-14-2021 03:26 PM
Re: Vintage air - huge sale!
 
Quote please! 72 K1500 non a/c. Looking for SureFit Complete Kit.

MCB Matt 05-14-2021 03:27 PM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by spmtamu11 (Post 8920685)
Quote please! 72 K1500 non a/c. Looking for SureFit Complete Kit.
PM on the way!
Thanks
Kim
MCbparts

kennygs72 06-11-2021 08:29 AM
Re: Vintage air - huge sale!
 
Matt , can i get a quote on a kit non air cab w/ electronic controls, sbc pass side comp bracket and a current lead time?, Thank kenny

MCB Matt 06-14-2021 10:47 AM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by kennygs72 (Post 8931218)
Matt , can i get a quote on a kit non air cab w/ electronic controls, sbc pass side comp bracket and a current lead time?, Thank kenny
PM on the way.
Thanks
Kim
MCBparts

hardhead 06-17-2021 12:22 PM
Re: Vintage air - huge sale!
 
Please quote sure fit kit for77 f-150 with 460 and factory air.

MCB Matt 06-17-2021 12:28 PM
Re: Vintage air - huge sale!
 
Good morning- Just wanted to let everyone know that Vintage air has sent out a notice, there will be a price increase as of July 15, 2021. Any and all quotes that have been sent out will be honored until July 14.
If you have any questions please send us a PM.
Thanks
Kim
MCBparts
925-828-5555

Tmend 06-19-2021 03:05 PM
Re: Vintage air - huge sale!
 
Can I get a price quote with tax and shipping on complete kit to 91304 before the price bump please. 72 blazer non air with compressor mounted to passenger side. I will be using factory a/c controller. Not sure if that changes anything being a non ac truck. Thanks much

yote1234 06-21-2021 10:20 AM
Re: Vintage air - huge sale!
 
finally got the vintage air installed in my blazer. And im very pleased.. it worked great in our 119 degree temps this week!!!
awesome product and great guy to deal with
Thx Matt...

MCB Matt 06-21-2021 11:06 AM
Re: Vintage air - huge sale!
 
Quote:
Originally Posted by Tmend (Post 8934230)
Can I get a price quote with tax and shipping on complete kit to 91304 before the price bump please. 72 blazer non air with compressor mounted to passenger side. I will be using factory a/c controller. Not sure if that changes anything being a non ac truck. Thanks much
PM on the way.
Thanks
Kim
MCBparts


All times are GMT -4. The time now is 03:20 AM.
Page 18 of 21 « First 81314151617 18 192021
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com