The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today? (https://67-72chevytrucks.com/vboard/showthread.php?t=368988)

padresag 03-24-2013 07:44 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by wutnxt (Post 5968078)
I managed to purchase a altenator for the 6.2 LSA supercharger set up for the 66 project low and go.....But i can't seem to purchase the bracket I need from ebay ......apparently I am a international customer and they don't roll that way....

if you have a US shipping address you get around that. over here we use an outfit called Seawings express international. they have a Blaine address and they bring stuff over daily $17.00 brings over 5lbs. pick it up at Victoria airport, whisk it through customs and your gone. there must be someone doing that at Abbotsford,a/port. US shipping to Blaine is usually minimal so in the end it doesn't make much difference and you don't have to pay those courier ripoff brokers fees.
ron

198plus 03-24-2013 08:49 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by towersddg9 (Post 5968204)
did the driver side glass and vent window, it was actually an easy job, (thanks to some help from members here) I bought the door glass off ebay it fit great, so did the new vent window (classic parts)

Looks nice, is that a new vent window.

awbrown 03-24-2013 08:58 PM

Re: What did you do to your truck today?
 
Took it out for a drive ! First drive of the spring !!!

T Smith 03-24-2013 09:20 PM

Re: What did you do to your truck today?
 
Got the rear done last week, worked on the front this weekend..


http://i209.photobucket.com/albums/b...84gt/bags2.jpg

http://i209.photobucket.com/albums/b...t/rearrims.jpg

towersddg9 03-25-2013 03:43 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by 198plus (Post 5968603)
Looks nice, is that a new vent window.

Thanks 198, looking forward to seeing your truck finished, those vent windows are new got em from Classic Parts, I was sweating the fitment as I've read here somewhere that some have had issues, these went right in and fit great

Thanks again for the feedback
Posted via Mobile Device

markeb01 03-25-2013 04:28 PM

Re: What did you do to your truck today?
 
Thanks for sharing that they fit well. I'd like to add those to my truck someday, along with the chrome frames on the side glass. I think they'd upgrade the cab every bit as much as the stainless windshield trim.

forestb 03-25-2013 04:36 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by T Smith (Post 5968686)

I don't mean to high jack the thread but how do the bottom of the bags attach to the lower control arms or do they just sit in the pockets?

dantimdad 03-25-2013 07:17 PM

Re: What did you do to your truck today?
 
My script valve covers arrived from Don today!

Woohoo!

They look great.

Now, to mod them for a PCV valve and a baffle and then repaint.

Steven

Ta2Don 03-25-2013 07:20 PM

Re: What did you do to your truck today?
 
Glad you like them, but, what no pics? LOL
Posted via Mobile Device

T Smith 03-25-2013 07:40 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by forestb (Post 5970285)
I don't mean to high jack the thread but how do the bottom of the bags attach to the lower control arms or do they just sit in the pockets?

The bottom of the bag bolts to a cup that just sits in the spring pocket.

dantimdad 03-25-2013 07:55 PM

Re: What did you do to your truck today?
 
Sorry, Don, here is a pic:

http://i391.photobucket.com/albums/o...ps674f80a3.jpg

Daniel is chomping at the bit to paint the scripts black. :)

Thanks again!

Steven

steve'62 03-25-2013 10:25 PM

Re: What did you do to your truck today?
 
Posted via Mobile Device

steve'62 03-25-2013 10:29 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Started on the cpp disc brake and drop spindle! The old spindle removal was a huge PITA.
Posted via Mobile Device
Posted via Mobile Device

Ta2Don 03-25-2013 10:34 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by dantimdad (Post 5970684)
Sorry, Don, here is a pic:

http://i391.photobucket.com/albums/o...ps674f80a3.jpg

Daniel is chomping at the bit to paint the scripts black. :)

Thanks again!

Steven

Looking Good! The black script will look sweet! :metal:

steve'62 03-25-2013 10:34 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
Posted via Mobile Device
Posted via Mobile Device

steve'62 03-25-2013 10:42 PM

Re: What did you do to your truck today?
 
Posted via Mobile Device

steve'62 03-25-2013 10:43 PM

Re: What did you do to your truck today?
 
Posted via Mobile Device

T Smith 03-27-2013 09:09 PM

Re: What did you do to your truck today?
 
Worked on it a bit this afternoon, it's sittin but not drivin...

http://i209.photobucket.com/albums/b...4gt/bagged.jpg

steve'62 03-28-2013 10:15 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
Posted via Mobile Device

Touchdown67 03-28-2013 03:46 PM

Re: What did you do to your truck today?
 
2 Attachment(s)
Installed a IPod stereo set up today. It consists of a Kicker Pxi50.2 controller a Kicker HS8 powered subwoofer and a pair of 4" 2-way speakers mounted in a pair of moulded plastic Versa-pods. The sound is incredible and it is totally hidden from view.
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

mud.man.rj 03-28-2013 04:59 PM

Re: What did you do to your truck today?
 
http://i1199.photobucket.com/albums/...ps7f0b12f4.jpg
http://i1199.photobucket.com/albums/...ps70b071f9.jpg
Cam/dbl roller timing chain installed/used an XE270 Comp 4x4 Extreme cam. Heads are ported and lifters/pushrods and roller rockers installed, going back out to finish porting intake now, can't wait to hear it run.

donthekawguy 03-28-2013 08:21 PM

Re: What did you do to your truck today?
 
Put on my new visors, wipers and cleaned up the heater box and put in a new core. Now I have heat just in time for summer. :devil:

mud.man.rj 03-28-2013 08:45 PM

Re: What did you do to your truck today?
 
http://i1199.photobucket.com/albums/...psebc714bd.jpg
Ported and port matched gaskets on Rpm intake, ready to install, getting closer.

Trsmotrhed 03-28-2013 09:36 PM

Re: What did you do to your truck today?
 
Installed autometer phantom gauges. Get paid Monday and will order the electronic speedometer and tach.

http://i1280.photobucket.com/albums/...ps26dfcab4.jpg
Posted via Mobile Device

azdude1964 03-28-2013 10:30 PM

Re: What did you do to your truck today?
 
*****in:metal:

azdude1964 03-28-2013 10:33 PM

Re: What did you do to your truck today?
 
ran a 6 ga. wire to my efi to stablize the volts. then took it for a cruz to see if it helped..and it did,,:metal:

azdude1964 03-29-2013 05:02 PM

Re: What did you do to your truck today?
 
enabled the autotuner on my megasquirt to tune the truck wow this things gonna be scary fast:metal:

1964Chevy 03-29-2013 05:41 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
To say that I did this today would be a lie. It has taken me about a month. Removed the original rad and installed new aluminum, lost the old broken shroud and noisy fan and installed an electric fan. Also removed the leaking LMC master cylinder and put new mc and reconditioned booster.
Hope everyone has a relaxing Easter Weekend.

donthekawguy 03-29-2013 06:34 PM

Re: What did you do to your truck today?
 
2 Attachment(s)
Started blasting my new to me rear end. I didn't have a lot of time so I just messed around for a bit. I am using a HF 50 lb blaster. I just wish I had a bigger compressor. It will take a couple of hours to get it done but it will look good. I'm going to put new seals in it por 15 it and put on a chrome cover and olts. The brakes will be all new and new u joints. I'm also having the trailing arms powdercoated and new bushings and bolts. 1st pic is half blasted pumpkin 2nd pic is the axle tube kinda blasted.

jayoldschool 03-29-2013 07:28 PM

Re: What did you do to your truck today?
 
What are your compressor specs? I've got a single stage 60 gal, 135psi. I wonder if that's enough for occasional blasting...

http://i40.photobucket.com/albums/e2...hool/001-1.jpg

donthekawguy 03-29-2013 07:45 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by jayoldschool (Post 5979069)
What are your compressor specs? I've got a single stage 60 gal, 135psi. I wonder if that's enough for occasional blasting...

http://i40.photobucket.com/albums/e2...hool/001-1.jpg

Mine is a 25 gal 125 psi. It will work but its going to take a while because I will have to stop and wait for it to refill.

gimmy 64 03-29-2013 07:54 PM

Re: What did you do to your truck today?
 
it is all about cfm's what does youre's put out at 90 lbs? mine puts out 8.5 at 90 and it still needs to catch up

awbrown 03-29-2013 08:10 PM

Re: What did you do to your truck today?
 
Took ol' blue out for the second run of spring...kinda' thinkin' it is time for a front sway bar .....

donthekawguy 03-29-2013 08:22 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by gimmy 64 (Post 5979119)
it is all about cfm's what does youre's put out at 90 lbs? mine puts out 8.5 at 90 and it still needs to catch up

Mine is only 4.3 at 90. Its good for about 30 seconds at a time. :lol: Maybe time to go get a new compressor.

62 Barnfind 03-29-2013 09:56 PM

Re: What did you do to your truck today?
 
Installed my carpet today!


http://img.photobucket.com/albums/v3...ps67be7744.jpg

Rich 5150 69 03-29-2013 10:02 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by awbrown (Post 5979143)
Took ol' blue out for the second run of spring...kinda' thinkin' it is time for a front sway bar .....

Just the front makes all the differance in the world in the way it handles, I really enjoy mine after it was installed.

Trsmotrhed 03-29-2013 10:21 PM

Re: What did you do to your truck today?
 
Worked on the bed today. Was able to save the bed side but replaced the bottom portion of the tail light panel.

http://i1280.photobucket.com/albums/...ps92879d21.jpg

Tail panel welded in.
http://i1280.photobucket.com/albums/...psa5d4f05d.jpg

All done.
http://i1280.photobucket.com/albums/...psb20e959c.jpg

Other side next weekend.
Posted via Mobile Device

dantimdad 03-29-2013 10:58 PM

Re: What did you do to your truck today?
 
cleaned up the bellhousing today. Daniel is going to paint it tomorrow while I start a part time job to pay for all the projects.

Steven

garett 03-29-2013 11:37 PM

Re: What did you do to your truck today?
 
hooked up new wiper sysytem in my 66 burban!!

T Smith 03-30-2013 07:16 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by 62 Barnfind (Post 5979423)

Very nice! That color would be perfect in mine, where did you get that and are you satisfied with it?


All times are GMT -4. The time now is 04:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com