Re: What did you do to your truck today?
Done with the passenger side of the cab...onto the driverside!
http://i6.photobucket.com/albums/y20...0/P1160068.jpg http://i6.photobucket.com/albums/y20...0/P1160077.jpg |
Re: What did you do to your truck today?
So far today, on the '65 Daily Driver project.-I've got the front end lowered about 2 1/2" with a different set of springs. Only took about 1/2 hour, since didn't have to knock loose any ball joints or anything. Just unbolted the shocks, removed upper control arm nuts, lowered spindle down as far as brake hose would let me, removed the springs, installed new springs and bolted it back up. Easiest I've ever lowered the front of one of these..
After lunch, going to relocate the fuel tank, run an electrical check with the new steering column hooked up to check turn signals, horn and hazard lights. May get around to actually putting the hood on and making it look like a truck again!, LOL. |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
Quote:
My speed shop guy say crimp the end on, then slide the boot over. Will give that a try. I have lots of beer on hand just in case! Posted via Mobile Device |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
Quote:
Posted via Mobile Device |
Re: What did you do to your truck today?
1 Attachment(s)
Did a little mock-up to try and decide what color to paint the intake manifold. Spent hours cleaning and wire brushing, then painting... Only to realize that I torqued down the heads without using non-hardening sealer! Going to fix that on Saturday and paint some more pieces.
The air cleaner will match the final blue color on the engine. Those are temp v/c the ones going on it are Mickey Thompsons and will have the flutes and the M/T in the same color blue. Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device |
Re: What did you do to your truck today?
1 Attachment(s)
Didn't do anything to my truck but I did get my compressor hooked up so I can do stuff for my truck. I had the wires hooked up wrong in the plug I put together but got it figured out. It's in my laundry room so I only had to build an 8 foot long cord for it. Being single has it's advantages. :metal:
|
Re: What did you do to your truck today?
lowslow64 - I think I'm in love with your truck...
joedoh - can't stop looking at your truck - s w e e t with attitude... rideblueCO - very nice bit of work on those lines - please come do mine. Snowbound - did you try some rubbing alcohol to get the "rubber" parts to slip around better for you? It should flash dry fairly fast without residue. Liv'n the dream - rg |
Re: What did you do to your truck today?
Got the front LED turn signals installed and working on the MH.
Posted via Mobile Device |
Re: What did you do to your truck today?
Busy Beaver today. On the left headlight the top adjustment screw was broken. Actually the plastic piece the screw screws into was broken. I had ordered 4 new ones from LMC they came today. So I got the tools back out and replaced them. It was actually easier than I thought it would be.
I should've ordered new springs for the headlights I didn't think to so next time I put together an order I'll try to remember and order new springs. Now I need to find a shop that can adjust them properly. I'll do the old shade tree trick tonight using the garage door. Posted via Mobile Device |
Re: What did you do to your truck today?
1 Attachment(s)
Been at it for a while now but it's slow moving with kids and wife work and home life, but I've managed to get a couple of things underway....
Posted via Mobile Device |
Re: What did you do to your truck today?
Broke my neck looking at that Photo :lol:
Waiting on that guy, to tell me a Price on my Truck :( I hope its not outrageous |
Re: What did you do to your truck today?
Quote:
Posted via Mobile Device |
Re: What did you do to your truck today?
Quote:
|
Re: What did you do to your truck today?
Quote:
:gmc2: |
Re: What did you do to your truck today?
1 Attachment(s)
wowee there bobbylast.... what happens when you lose that 9/16 wrench?? must be heck trying to find it!!
I made a fixture to stretch my hood springs so i could powder coat them |
Re: What did you do to your truck today?
2 Attachment(s)
I got my rear end blasted and coated with rust treater, replaced one seal so far and screwed up a spring holder on a backing plate. Good thing I have my old rear end to get parts off of. :lol: I wish I would have figured out what the gear ratio is before I took it apart I'm dying to know. Oh well I can wait till tomorrow. I need to take the brake parts off my other rear end, clean up all the springs and stuff, change the other seal, paint it with por15 and I think thats it. I'm still waiting for my trailing arms and wiring harness then I can get it all together.
|
Re: What did you do to your truck today?
Adjusted idle on carb,was ideling too high,lowered it just a tad,it purrrrs like a big cat now.
|
Re: What did you do to your truck today?
Well, I went and looked at the ultimate add on for my truck... A 5 bay garage with a paint booth and a sandblasting booth!
If the guy agrees on the price I may be stopping work on the truck and the falcon and moving them to the shop after I do some cleanup work, repair the huge compressor and run lines, add more lighting and paint the place. I think the other smart thing to do would be to go ahead and buy the 65 1 ton truck I looked at last week, and turn it into a car hauler. I plan on renting out booth time and bay time to help cover the payments, which by the way, would be so cheap I could actually pay them by picking up sand blasting jobs. No pics of the place yet. Keep your fingers crossed! Steven |
Re: What did you do to your truck today?
I got a coat of por15 on the new rear end and spent another 400 bucks at classic.
|
Re: What did you do to your truck today?
work on my 76 chevy luv.. tryin to get it straight again
|
Re: What did you do to your truck today?
Just swapped out my fuel tank sending unit. HEY!!!! My gas gauge works!!! Now to re-gasket that carburetor...
|
Re: What did you do to your truck today?
Quote:
or you can count the pinion tooth count and the ring gear count and divide the pinion into the ring count... |
Re: What did you do to your truck today?
2 Attachment(s)
Put some SS rail caps on Frank, I think he likes these better than the wood racks I concur. I could not find any for 60-66 any where, these are for a 73-80 I just trimmed each end a little...Vernski:bann:
|
Re: What did you do to your truck today?
Bought a remanufactured PS kit to replace the current leaking parts.
Posted via Mobile Device |
Re: What did you do to your truck today?
1 Attachment(s)
Spent some time at a local muffler shop getting a new cat installed on my civic and talked with the owner of this 56 Bel Air. He has done a lot of them. After he left the shop owner was telling me that the owner of the 56 was complaining about the new exhaust costing $280. The shop owner was running 3" dual galvanized pipe (one whole piece each to the mufflers) to the Summit turbo mufflers (provided by 56 owner), then to chrome tips. You ask me, that was one incredible deal!
Car was a complete frame off and has an IROC engine in it. The front clip was off. The owner trailered it there and I saw that he only had two lugs per tire installed and paint on some tires. Those Cragar stars are his junk rims! Posted via Mobile Device Posted via Mobile Device |
Re: What did you do to your truck today?
nice project hes working on
|
Re: What did you do to your truck today?
Quote:
I finally got my parts from Performance Online so now I can start getting it together. My trailing arms are still at the coaters so thats going to slow me down. Plus I have school 3 days next week and test for my CDL Saturday after working 40 hours this week. I'm hoping to squeeze a few hours in on the truck tomorrow and Tuesday. |
Re: What did you do to your truck today?
I used mine around the farm today. Then took it for a joy ride. Man those old tires scare me somtimes!:lol::chevy:
|
Re: What did you do to your truck today?
Used my Neighbors truck to Bring home Two Boats
|
Re: What did you do to your truck today?
Hooked up the overflow bottle, and cleaned up the wiring for the electric fan and switch. Going to a car show tomorrow, if there are any other trucks I'll post them.
|
Re: What did you do to your truck today?
Rebuilt the rear brakes with all new hardware and shoes, and got everything together to replace the oil pan gasket tomorrow.
|
Re: What did you do to your truck today?
|
Re: What did you do to your truck today?
got it running, there was a burnt wire in the harness and a giant vacuum leak on the booster.
http://i103.photobucket.com/albums/m...h_IMG_3566.jpg |
Re: What did you do to your truck today?
Took the yoke off the rear end only to find out I bought the wrong one :( didn't know there was diff spline count on 12bolt rears. great now I gotta wait and return the one I have and hope summit has the one I need
Posted via Mobile Device |
Re: What did you do to your truck today?
Patched some rust on the inside of bed.
http://i1280.photobucket.com/albums/...ps2f8315a0.jpg Posted via Mobile Device |
Re: What did you do to your truck today?
Spent the weekend cutting, trimming, bending, punching, screwing, drilling, grinding, welding....it's coming together.
http://i6.photobucket.com/albums/y20...0/P1160089.jpg http://i6.photobucket.com/albums/y20...0/P1160120.jpg http://i6.photobucket.com/albums/y20...0/P1160146.jpg |
Re: What did you do to your truck today?
I got my 1966 parts truck 250ci started (1st time since I purchased it 4/4/13) and . . . I checked the compression! It's all good, so it will be going onto my 65 frame sometime within the next 2 weeks!
This is my makeshift gas can on the roof fuel pump! http://i618.photobucket.com/albums/t...ps5537f718.jpg http://i618.photobucket.com/albums/t...psc6054730.jpg http://i618.photobucket.com/albums/t...ps7a014940.jpg http://i618.photobucket.com/albums/t...psd8e9416e.jpg http://i618.photobucket.com/albums/t...ps4339f67e.jpg |
Re: What did you do to your truck today?
Um I watched it rain on mine with the door off,cuz I'm replacing the rocker...
|
All times are GMT -4. The time now is 02:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com