The 1947 - Present Chevrolet & GMC Truck Message Board Network - Tootsie build for my mother with cancer

Page 19 of 180

« First

119

Last »

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- 67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)

- - Tootsie build for my mother with cancer (https://67-72chevytrucks.com/vboard/showthread.php?t=516741)

jlaird

06-05-2012 06:30 PM

Re: Tootsie build for my mother with cancer

Quote:

Originally Posted by superflysteiny (Post 5416422)

Ok so I started last week on the inner bed sides and the rear inner fenders. I used 3/4 inch box on top of the one inch box I used for the sub frame so that the metal would flush mount with the wood. I am happy with the way it turned out, but I am planning on redoing the metal on the top of the fender because I got it a little to hot and warped it while I was welding, so I need to fix it. Other than that I am happy with the way it turned out. What do you guys think.

Are you hammering your welds? That welded seem is going to wrap (shrink) no matter what, so before you do it over, try stretching it.
Posted via Mobile Device

superflysteiny

06-05-2012 06:57 PM

Re: Tootsie build for my mother with cancer

Quote:

Originally Posted by jlaird (Post 5418965)

Are you hammering your welds? That welded seem is going to wrap (shrink) no matter what, so before you do it over, try stretching it.
Posted via Mobile Device

I have already hammered and dolied the heck out of it. I know you will get some shrinkage but in my mind there is too much on this piece of metal

superflysteiny

06-05-2012 06:58 PM

Re: Tootsie build for my mother with cancer

My old man told me to leave it the hell alone and use some filler but I have a hard time doing that

R.A.D

06-05-2012 07:19 PM

Re: Tootsie build for my mother with cancer

now thats cool!

jlaird

06-05-2012 08:43 PM

Re: Tootsie build for my mother with cancer

Quote:

Originally Posted by superflysteiny (Post 5419013)

My old man told me to leave it the hell alone and use some filler but I have a hard time doing that

I know what you mean. I'm the same way. How long a stitch weld you doing? I do about 3/4 inch, then grind smooth, then hammer. It's been working out good. I kind of just recently learned this.
Posted via Mobile Device

superflysteiny

06-06-2012 10:46 AM

Re: Tootsie build for my mother with cancer

Were I screwed up was i sectioned the fender in the center I only had to extend the fender 2 inches. When I put it back together I dont think it was flat that combined with the shrinkage and there you have it the metal warped in the center. I am going to cut the next fender on the end and lower the heat a little. I use the same technique you use. See how it works. I am always trying to get better.

67cheby

06-06-2012 10:49 AM

Re: Tootsie build for my mother with cancer

i only spot weld panels like that 2 spot welds, skip, 2 spot welds.......

65Pickup

06-06-2012 12:37 PM

Re: Tootsie build for my mother with cancer

I've been trying to figure out this discussion on warpage, completely missed the fenders...awesome style. Tootsies burnouts will look amazing as the smoke flows thru those holes!! Your Dad's probably not too wrong on the fix, but I trust you'll get it right.

superflysteiny

06-06-2012 12:45 PM

Re: Tootsie build for my mother with cancer

You guys no I just want the metal to be as close to perfect as possible. I dont want alot of filler on this truck.

R.A.D

06-06-2012 07:21 PM

Re: Tootsie build for my mother with cancer

Quote:

Originally Posted by superflysteiny (Post 5420226)

You guys no I just want the metal to be as close to perfect as possible. I dont want alot of filler on this truck.

hey thanks for looking in on my build i appreciate that.

you've always gone for perfection. and that is to be admired. if you tack every two inches and come come back and piggyback your welds until you have it completely welded. this gives the metal a chance to cool and will reduce if not eliminate the distortion

stepside83

06-06-2012 09:00 PM

Re: Tootsie build for my mother with cancer

any progress, hope all is well

Bowtie468

06-07-2012 02:32 AM

Re: Tootsie build for my mother with cancer

Wow, that some really nice work !
Posted via Mobile Device

Mad Rods

06-09-2012 02:03 PM

Re: Tootsie build for my mother with cancer

Truck looking sweet!!!!!
Posted via Mobile Device

superflysteiny

06-11-2012 10:39 AM

Re: Tootsie build for my mother with cancer

Quote:

Originally Posted by R.A.D (Post 5420797)

hey thanks for looking in on my build i appreciate that. Hay man no problem super clean build. I love it

you've always gone for perfection. and that is to be admired. if you tack every two inches and come come back and piggyback your welds until you have it completely welded. this gives the metal a chance to cool and will reduce if not eliminate the distortion

Thanks man I did that but I think the cender sagged in the center when I put the two pieces together on the second fender I did not have this problem.

Quote:

Originally Posted by stepside83 (Post 5420957)

any progress, hope all is well

Here are the update pics hope you like them

Quote:

Originally Posted by Bowtie468 (Post 5421559)

Wow, that some really nice work !
Posted via Mobile Device

Thanks same to you

Quote:

=Mad Rods;5425394]Truck looking sweet!!!!!
Posted via Mobile Device

Thanks I kind of like it

superflysteiny

06-11-2012 10:55 AM

Re: Tootsie build for my mother with cancer

Ok I have not cut the top of the drivers side fender yet to redo the metal but I will this week. I have a few more fitment issues I have to fix with the passanger side then i will do the trim around the gas tank and the rear of the bed then off to body and paint, I am ordering the motor today we are looking to make 700 to 800 hp at the wheels http://i1005.photobucket.com/albums/...frame007-1.jpg
http://i1005.photobucket.com/albums/...frame006-1.jpg
http://i1005.photobucket.com/albums/...frame005-1.jpg
http://i1005.photobucket.com/albums/...frame004-1.jpg
http://i1005.photobucket.com/albums/...frame003-1.jpg
http://i1005.photobucket.com/albums/...frame001-1.jpg

Bennett68C10

06-11-2012 11:09 AM

Re: Tootsie build for my mother with cancer

That bed looks sick, you do really nice work. The motor you are planning is going to be a beast. This is going to be a crazy ass truck, I can't wait to see it done.

superflysteiny

06-11-2012 11:21 AM

Re: Tootsie build for my mother with cancer

Quote:

Originally Posted by Bennett--G4L (Post 5428497)

That bed looks sick, you do really nice work. The motor you are planning is going to be a beast. This is going to be a crazy ass truck, I can't wait to see it done.

Thanks man the bed has been a real challange for me but I am getting it. I am glad you like it.

big_al_71

06-11-2012 11:26 AM

Re: Tootsie build for my mother with cancer

Eric the bedwork looks terrific....

superflysteiny

06-11-2012 11:28 AM

Re: Tootsie build for my mother with cancer

Quote:

Originally Posted by big_al_71 (Post 5428517)

Eric the bedwork looks terrific....

Thanks Al I know its not exactly like the rendering but I think it ties in well with the truck

Bennett68C10

06-11-2012 11:41 AM

Re: Tootsie build for my mother with cancer

Quote:

Originally Posted by superflysteiny (Post 5428510)

Thanks man the bed has been a real challange for me but I am getting it. I am glad you like it.

Like it, I LOVE IT. I wish I could send you mine to do lol.

superflysteiny

06-11-2012 11:58 AM

Re: Tootsie build for my mother with cancer

Thanks man, you would have a ton of money in shipping :lol::lol:

67cheby

06-11-2012 01:01 PM

Re: Tootsie build for my mother with cancer

Looking great !

truckmanloco

06-11-2012 01:13 PM

Re: Tootsie build for my mother with cancer

DUDE, the bed looks *****in even better than what i had pictured in my head.

superflysteiny

06-11-2012 02:26 PM

Re: Tootsie build for my mother with cancer

Thanks brother

oldman3

06-11-2012 05:09 PM

Re: Tootsie build for my mother with cancer

That bed looks so sweeeet, can't wait to see it finished....Jim

All times are GMT -4. The time now is 03:06 PM.

Page 19 of 180

« First

119

Last »

Show 40 post(s) from this thread on one page