Re: Danny Boy is BAACK! w/ '55 Big Window
I did have it powder coated with a chrome like finish. At the time I wanted it to look like a stainless tank. But I was also aware that it woud not be very visible from the rear. Filling it from the bed has not been a problem. I couldnt find another option that I thought looked better. I didn't want a filler door on the fender. Myabe later I'll put a nice floor in the bed, then I might do one that opens to fill the tank!
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Ok, thanks. I kinda like your gas cap as it is, set "in" or down in the S.S. recess. It looks clean, well engineered. The billet doors kinda strike me as '80's billet-tech. Just my $.02.
I suppose I shouldn't be lazy - I should go look at your thread, but anything new on the truck? |
Re: Danny Boy is BAACK! w/ '55 Big Window
Nothing new right now. But I do have a few ideas in mind that I will be working soon. Stayed tuned!!
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Yeah, I just went and looked up your thread....you SLACKER!!! lol.
All you've been doing is working on that '55 car and I'm jealous as hell. I had my Dad's special ordered black '55 two door hard top Belair when I was 16-17...and like an absolute idiot - I didn't want it! I gave it back to him so I could buy a '66 Chevy van - DOH! My secret (sshhhh!) desire is to get my truck totally as I want it mechanically before I retire, then blow it apart for final paint. BUUUT, I'm also wondering if I can manage to find a '55 car somewhere afterward. I might even consider a two door wagon - always kinda liked them and a Nomad is out of the question unless I win the Lotto. You and Bam have me all worked up about owning both a truck AND a car. |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
Building a kickass truck after already owning a kick ass '55 car....sheesh!:lol: Seriously, I don't know if it'll ever happen. On one hand, it's too much expense to realistically expect to be able to do it in my retirement years. On the other hand? What's my rush? I'll have nothing but time. I can find a derelict body and go at it slowly since I'll be able to work on it as much as I decide to. |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
I wondered why the WalMart door greeters where retirees always smiling, they are probably funding their builds. ;) |
Re: Danny Boy is BAACK! w/ '55 Big Window
Nothing to "show" today but my Altman Door Latch kit FINALLY arrived today!
Yes, I bit the bullet and sprung for them after having my passenger door fly open one time too many. I hope the kit goes in as easy as I've seen others do it online. Photos and a full description upcoming of course but I will not be able to get to it this week/weekend as I've got a lot on my plate this week. |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
Posted via Mobile Device |
Re: Danny Boy is BAACK! w/ '55 Big Window
Thanks for bringing my thread back to the top, JR!
I haven't started the install cause once I begin I've gotta finish (at least one side) or I can't really move the truck. I've stated before I have a long single file driveway and "toys" - boat, camper, jetski's - so I can't afford to have the truck un-driveable for long. I was/may start today but I REALLY need to finish up the weld repair on the passenger side (I'm THIS close) and I'm baad about jumping around on stuff I'm doing - "Oh look, a squirrel!" Lol. As soon as I start, pictures will be posted. Posted via Mobile Device |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
As I stated before...... Sounds like my A.D.D. ! You ever stopped to think, and forget to start again? :lol::lol::lol: Posted via Mobile Device |
Re: Danny Boy is BAACK! w/ '55 Big Window
Yeah, well what's MY excuse? I don't have ADHD or anything.
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
:lol::lol::lol: Posted via Mobile Device |
Re: Danny Boy is BAACK! w/ '55 Big Window
2 Attachment(s)
I thought you guys might like seeing this. I was driving to the office from a meeting I saw this truck for the first time. I drive this route frequently and had never seen it before. I stopped to look at it and the owner came out of that glass shop its parked in front of; we had a nice little conversation.
He's had it 16-17 years. Bought it as a basket case with no motor but he found a 265 for it in a junkyard. It's not perfect, a few scratches, etc. But its a nice driver/head turner and has a nice look to it - I think. Still running bias ply tires, though he says he's considering going to radials. 3-on-the-tree tranny, oak & polished bed strips, filled body seams in the interior overhead area, it has dual horns - I'm jealous - I want a passenger side horn for mine! Underhood the motor is clean but not show quality in Chevy orange and Edelbrock finned valve covers. I noticed it has '55-'56 hubcaps and is missing the "V8" emblem, though it IS an original V8 truck. He says he drives it everywhere and never thinks about reliability. Anyway enjoy, I did. I plan to drive mine into work in the next couple of weeks and I will stop by and compare notes with him again. - Dan |
Re: Danny Boy is BAACK! w/ '55 Big Window
Cool looking truck.
Kim |
Re: Danny Boy is BAACK! w/ '55 Big Window
I agree, I'm not a big fan of stock looking trucks, but this one is nice and clean
|
Re: Danny Boy is BAACK! w/ '55 Big Window
It's just a cool old driver. I guess that's what like about it. Still out there day after day.
Posted via Mobile Device |
Re: Danny Boy is BAACK! w/ '55 Big Window
Nice 57.
|
Re: Danny Boy is BAACK! w/ '55 Big Window
I got off a bit early today and since my truck is stuck in the garage I got a couple minor but time consuming jobs done.
Ordinarily my boat is in the garage but since I'm taking it out next week and needed to get the camper off my truck (not using it this trip) and still have room to park everything it was easiest to put the truck in there with the camper blocking it in for now. The rear of my hood has been kicked up ever since I took it off to paint it - turns out I was clueless where to put the body shims on when I reinstalled it. Plus, I noticed one of the hood bolts had come loose/fallen off. Since I've been trying to do each job nicely as I do them, I decided to replace all the hood bolts w/stainless button head set screws, washers & lock washers. Fabguy here (Mike) told me to put the shims behind the lower hinge bolt on the firewall - I had put them on the top one - DOH! After figuring out how to do this by myself and with the hood still on the truck it cleared up the problem right off. Also, I had to use my truck as a truck the other day:eek: I cut off a sheet of OSB I already had and threw it in the bed. I am also trying to clean up my garage and noticed I had a couple OLD cans of marine spar in there so I had put a coat on the OSB the other day - 4'x6' and it DRANK a full quart! I gave it a light sand and gave it a 2nd coat today. Of course OSB looks like ass but at least it won't flake off for the few months its in there...I hope. |
Re: Danny Boy is BAACK! w/ '55 Big Window
NIce truck. Looks a lot like the one I sold a while back when I realized I didn't have time to build two. That one is much nicer though.
http://i157.photobucket.com/albums/t...e/DSCF0750.jpg http://i157.photobucket.com/albums/t...h_IMGP2797.jpg http://i157.photobucket.com/albums/t...h_IMGP2792.jpg |
Re: Danny Boy is BAACK! w/ '55 Big Window
Yeah, they do look alike. But it doesn't have the deluxe cab trim yours did. The seat did look just like yours.
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Dan, what is your tire size and wheel width? Thanks,Art
|
Re: Danny Boy is BAACK! w/ '55 Big Window
235/75x15 Hankooks bought virtually new as takeoffs from an F150 for $60. STOLE the vintage 15x7 Torq Thrust knockoffs from Craigslist for only $150 including polished aluminum center caps.
I wanted 70 series or even 60 series but these were SO cheap I couldn't pass them up. And they kinda give the truck a cartoonish "Roger Rabbit" car look! Posted via Mobile Device |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
I have 255x70's on 9" rims on the back. |
Re: Danny Boy is BAACK! w/ '55 Big Window
Wow, 9's fit in back w/o rubbing? Did you have to order special back spacing? Maybe I should ask what rearend you've got? Mines a 10 bolt but I don't know out of what.
A buddy of mine has offered me a set of 15x8 Rally's with rings & caps cheap. I want them but I'm afraid they'll be too big. Posted via Mobile Device |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Thanks, but they're not really Americans. No idea WHAT they really are.
Any chance you'll swap rear ends to get matching lug pattern AND narrow up a bit? Two spares? UGH! I'd carry a couple bottles of Fix-A-Flat! I'm carrying NO spare but I've got a AAA card! |
Re: Danny Boy is BAACK! w/ '55 Big Window
Ok, so I visited The Truck Shop in Orange, CA today. Planned to buy the V8 fender emblems for my truck but they were outta stock - natch!
But being the chrome whore I am:bling2: I couldn't go home without SOMETHING shiny, so I bought replacement chrome wiper bezels. Mine are totally cloudy and rust pecked. While I was there I went ahead and bought the rear big window rubber as mine is hard as a rock and cracked, chunks missing, etc. ALMOST bought the "chrome" lock strip for it, but I don't have the stainless trim on the windshield and I want the front & back to match. I keep thinking about whether I want the deluxe trim around the windows? Seems like even for me that trim AND the windshield/back window trim would be gaudy. But I DID forget to buy the CHROME bench seat handle! lol |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
a spare unless I go on a long drive. |
Re: Danny Boy is BAACK! w/ '55 Big Window
Ok, I guess I misunderstood and though the rearend was too wide. Sounds like your tires are the culprits. You think one size smaller will be enough for cornering with radials?
255's down to 245's is only going from 10.1" wide to 9.7". A little over 3/8". Won't the sidewalls on radials flex that much? |
Re: Danny Boy is BAACK! w/ '55 Big Window
Anyone have anything good/bad to say about THESE bending tools:
Amazon.com: Eastwood Brake Line Tubing Bender and... ...cause I JUST ordered them! Hope I won't regret the expense. There were cheaper ones, but... |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
|
Re: Danny Boy is BAACK! w/ '55 Big Window
I got to order 2 of those mirrors for mine. My pass door doesn't have the holes or the plate inside the door for the mirror. Who did you get your mirrors from? Thanks
Rich my build http://67-72chevytrucks.com/vboard/s...d.php?t=576185 |
Re: Danny Boy is BAACK! w/ '55 Big Window
Hi Russ,
Nah, "piece of cake"....once I figured out how to do it, lol. I have a 48" aluminum straight edge I held up to where I wanted the top of the letters. I balanced one of those little bullet levels on it. Then I very lightly drew a sharp pencil line. When I applied the letters I just eye-balled the side to side spaces, then I JUST covered the pencil line. |
Re: Danny Boy is BAACK! w/ '55 Big Window
Quote:
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Dan, where did you pick up the chrome letters for the tailgate? That looks sweet.
|
Re: Danny Boy is BAACK! w/ '55 Big Window
Same-same, The Truck Shop in Orange. I THINK it's actually called The Car and Truck Shop.
It's surprising how many people really like those. I went to buy white or off white but it turned out they don't carry off white and were out of stock on white. The had black and the chrome ones....so 'ya know!:lol: Spent some time today TRYING to polish the lips on my old Torq-Thrust wannabe's. Only partly successful. The previous owner told me he coated them with something. They were/are uniformly dull. I don't mind on the spokes but the lip has always bothered me. I did this by putting the truck on jack stands and running it in gear - yes, dangerous. Turned out there was a thick film of SOME thing on it. It was so thick I started out sanding with emery cloth but that wasn't getting it so I shut it off to find I'd exposed an edge of the film. I used a combo of a carpet knife and a box knife while running to sort of "cut" the film off. Some of it came off in 3/4" x 5" or 6" long strips! Anyway, it's not (yet) to my satisfaction but I did polish this one up. I really only want a machine finish or a little shinier. It's almost there but not quite uniform enough yet. BEFORE: http://i832.photobucket.com/albums/z...ps5c87a6f5.jpg AFTER:http://i832.photobucket.com/albums/z...psd59bf385.jpg |
Re: Danny Boy is BAACK! w/ '55 Big Window
The rims are going to look nice when done.
Kim |
Re: Danny Boy is BAACK! w/ '55 Big Window
wheels look good !
|
All times are GMT -4. The time now is 06:46 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com